# tun2proxy
A tunnel interface for HTTP and SOCKS proxies on Linux based on [smoltcp](https://github.com/smoltcp-rs/smoltcp).

## Build
Clone the repository and `cd` into the project folder. Then run the following:
```
cargo build --release
```

## Setup
## Automated Setup
Using `--setup auto`, you can have tun2proxy configure your system to automatically route all traffic through the
specified proxy. This requires running the tool as root and will roughly perform the steps outlined in the section
describing the manual setup, except that a bind mount is used to overlay the `/etc/resolv.conf` file.

## Manual Setup
A standard setup, which would route all traffic from your system through the tunnel interface, could look as follows:
```shell
# The proxy type can be either SOCKS4, SOCKS5 or HTTP.
PROXY_TYPE=SOCKS5
PROXY_IP=1.2.3.4
PROXY_PORT=1080

# Create a tunnel interface named tun0 which your user can bind to,
# so we don't need to run tun2proxy as root.
sudo ip tuntap add name tun0 mode tun user $USER
sudo ip link set tun0 up

# To prevent a routing loop, we add a route to the proxy server that behaves
# like the default route.
sudo ip route add "$PROXY_IP" $(ip route | grep '^default' | cut -d ' ' -f 2-)

# Route all your traffic through tun0 without interfering with the default route.
sudo ip route add 128.0.0.0/1 dev tun0
sudo ip route add 0.0.0.0/1 dev tun0

# If you wish to also route IPv6 traffic through the proxy, these two commands will do.
sudo ip route add ::/1 dev tun0
sudo ip route add 8000::/1 dev tun0

# Make sure that DNS queries are routed through the tunnel.
sudo sh -c "echo nameserver 198.18.0.1 > /etc/resolv.conf"

./target/release/tun2proxy --tun tun0 --proxy "$PROXY_TYPE://$PROXY_IP:$PROXY_PORT"
```

Note that if you paste these commands into a shell script, which you then run with `sudo`, you might want to replace
`$USER` with `$SUDO_USER`.

This tool implements a virtual DNS feature that is used by default. When a DNS packet to port 53 is detected, an IP
address from `198.18.0.0/15` is chosen and mapped to the query name. Connections destined for an IP address from that
range will supply the proxy with the mapped query name instead of the IP address. Since many proxies do not support UDP,
this enables an out-of-the-box experience in most cases, without relying on third-party resolvers or applications.
Depending on your use case, you may want to disable this feature using `--dns none`.
In that case, you might need an additional tool like [dnsproxy](https://github.com/AdguardTeam/dnsproxy) that is
configured to listen on a local UDP port and communicates with a third-party upstream DNS server via TCP.

When you terminate this program and want to eliminate the impact caused by the above several commands,
you can execute the following command. The routes will be automatically deleted with the tunnel device.
```shell
sudo ip link del tun0
```

## CLI
```
Tunnel interface to proxy.

Usage: tun2proxy [OPTIONS] --proxy <URL>

Options:
  -t, --tun <name>      Name of the tun interface [default: tun0]
  -p, --proxy <URL>     Proxy URL in the form proto://[username[:password]@]host:port
  -d, --dns <method>    DNS handling [default: virtual] [possible values: virtual, none]
  -s, --setup <method>  Routing and system setup [possible values: auto]
      --setup-ip <IP>   Public proxy IP used in routing setup
  -h, --help            Print help
  -V, --version         Print version
```
Currently, tun2proxy supports HTTP, SOCKS4/SOCKS4a and SOCKS5. A proxy is supplied to the `--proxy` argument in the
URL format. For example, an HTTP proxy at `1.2.3.4:3128` with a username of `john.doe` and a password of `secret` is
supplied as `--proxy http://john.doe:secret@1.2.3.4:3128`. This works analogously to curl's `--proxy` argument.

## Configuration Tips
### DNS
When DNS resolution is performed by a service on your machine or through a server in your local network, DNS resolution
will not be performed through the tunnel interface, since the routes to localhost or your local network are more
specific than `0.0.0.0/1` and `128.0.0.0/1`.
In this case, it may be advisable to update your `/etc/resolv.conf` file to use a nameserver address that is routed
through the tunnel interface. When virtual DNS is working correctly, you will see log messages like
`DNS query: example.org` for hostnames which your machine is connecting to after having resolved them through DNS.

Note that software like the `NetworkManager` may change the `/etc/resolv.conf` file automatically at any time, which
will result in DNS leaks. A hacky solution to prevent this consists in making the file immutable as follows:
`sudo chattr +i "$(realpath /etc/resolv.conf)"`.

### IPv6
Some proxy servers might not support IPv6. When using virtual DNS, this is not a problem as DNS names are resolved by
the proxy server. When DNS names are resolved to IPv6 addresses locally, this becomes a problem as the proxy will be
asked to open connections to IPv6 destinations. In such a case, you can disable IPv6 on your machine. This can be done
either through `sysctl -w net.ipv6.conf.all.disable_ipv6=1` and `sysctl -w net.ipv6.conf.default.disable_ipv6=1`
or through `ip -6 route del default`, which causes the `libc` resolver (and other software) to not issue DNS AAAA
requests for IPv6 addresses.

## TODO
- Improve handling of half-open connections
- Increase error robustness (reduce `unwrap` and `expect` usage)
- UDP support for SOCKS
- Native support for proxying DNS over TCP or TLS