Issue: [link](https://github.com/go-gitea/gitea/issues/9637)
Changes introduced: I have clarified the problematic terms (`login`,
`login_name`, and `username`) in all affected endpoints.
The changes were made to relevant:
- HTTP endpoint parameters' descriptions
- response/request models' fields
enable nolintlint scope requirement
add comments to new directives so it's more obvious why they are in
place
---
I can also toggle the mandatory comments on if that's something of
interest.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up the "editor" refactor, use the same approach to simplify code,
and fix some docs & comments
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
This PR fixes a state de-synchronization bug with the issue stopwatch,
it resolves the issue by replacing the ambiguous `/toggle` endpoint
with two explicit endpoints: `/start` and `/stop`.
- The "Start timer" button now exclusively calls the `/start` endpoint.
- The "Stop timer" button now exclusively calls the `/stop` endpoint.
This ensures the user's intent is clearly communicated to the server,
eliminating the state inconsistency and fixing the bug.
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This variable is unused, occurs nowhere in the codebase. I can't
pinpoint the exact commit when it was last used, but I think it's unused
since the docs were moved out.
Fix#34504
Since one required context can match more than one commit statuses, we
should not directly compare the lengths of `requiredCommitStatuses` and
`requiredContexts`
---------
Signed-off-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR improves some `.vue` components by using `shallowRef instead of
ref`, which `should improve performance`. It's probably not significant,
but it's an improvement because Vue no longer deep watches the ref
(shallowRef). Also i used `useTemplateRef` instead of `ref`.
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When viewing a file that the user can't edit because they can't write to
the branch, the new, upload, patch, edit and delete functionality is no
longer disabled.
If no user fork of the repository exists, there is now a page to create one.
It will automatically create a fork with a single branch matching the one
being viewed, and a unique repository name will be automatically picked.
When a fork exists, but it's archived, a mirror or the user can't write
code to it, there will instead be a message explaining the situation.
If the usable fork exists, a message will appear at the top of the edit page
explaining that the changes will be applied to a branch in the fork. The
base repository branch will be pushed to a new branch to the fork, and
then the edits will be applied on top.
The suggestion to fork happens when accessing /_edit/, so that for
example online documentation can have an "edit this page" link to
the base repository that does the right thing.
Also includes changes to properly report errors when trying to commit
to a new branch that is protected, and when trying to commit to an
existing branch when choosing the new branch option.
Resolves#9017, #20882
---------
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds a feature to direct users to appropriate pages after system
installation:
- If no admin credentials were provided during installation, redirect to
the registration page with a prominent notice about creating the first
administrative account
- If admin credentials were already set, redirect directly to the login
page
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
# Fix Feishu Webhook Signature Verification
This PR implements proper signature verification for Feishu (Lark)
webhooks according to the [official
documentation](https://open.feishu.cn/document/client-docs/bot-v3/add-custom-bot).
## Changes
- Implemented the `GenSign` function based on Feishu's official Go
sample code
- Modified the webhook request creation to include timestamp and
signature in the payload when a secret is configured
- Fixed the signature generation algorithm to properly use HMAC-SHA256
with the correct string format
## Implementation Details
The signature verification works as follows:
1. When a webhook secret is provided, a timestamp is generated
2. The signature string is created using `timestamp + "\n" + secret`
3. The HMAC-SHA256 algorithm is applied to an empty string using the
signature string as the key
4. The result is Base64 encoded to produce the final signature
5. Both timestamp and signature are added to the payload
According to Feishu's documentation, the timestamp must be within 1 hour
(3600 seconds) of the current time to be considered valid.
## Security Note
Feishu emphasizes the importance of keeping webhook URLs secure. Do not
disclose them on GitHub, blogs, or any public sites to prevent
unauthorized use.
## References
- [Feishu Custom Bot
Documentation](https://open.feishu.cn/document/client-docs/bot-v3/add-custom-bot)
---------
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The merge-upstream route was so far performing any kind of merge, even
those that would create merge commits and thus make your branch diverge
from upstream, requiring manual intervention via the git cli to undo the
damage.
With the new optional parameter ff_only, we can instruct gitea to error
out, if a non-fast-forward merge would be performed.
Converts the repo file tree items into `<a>` elements to have default
link behavior. Dynamic content load is still done when no special key is
pressed while clicking on an item.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Upgrade to
[v0.19.0](https://github.com/golang/tools/releases/tag/gopls%2Fv0.19.0)
and fix issues. Runs with new `warning` serverity setting. This likely
does less checks than before. Additionally, add `make fix` which runs
modernize. This is also verified on CI.
For the record, here are the issues discoverd when running with `info`
severity, in case we want to fix these:
```
tests/integration/repo_test.go:95:5-14: could use tagged switch on i
tests/integration/api_packages_generic_test.go:149:4-64: could use tagged switch on setting.Packages.Storage.Type
services/webhook/msteams_test.go:33:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:59:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:85:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:111:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:138:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:161:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:187:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:213:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:239:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:266:4-33: could use tagged switch on fact.Name
services/webhook/msteams_test.go:407:4-33: could use tagged switch on fact.Name
tests/integration/api_packages_conan_test.go:350:6-33: could use tagged switch on pf.Name
models/issues/tracked_time_test.go:98:3-18: could use tagged switch on user.ID
tests/integration/api_token_test.go:505:5-43: could use tagged switch on minRequiredLevel
services/gitdiff/gitdiff.go:220:33-46: method "getLineLegacy" is unused
```
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
1. Use `OpenXxx` instead of `GetXxx` because the returned readers should
be correctly closed, and clarify the behaviors of the functions: they
increase the download counter
2. Use `packages-content` styles instead of `issue-content`
This adds a new field, "tag_message", that represents the message of the
annotated tag.
Resolves#31835.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
By default, the code extracts 200 package versions. If too many packages
are generated every day or if rule cleaning is enabled later, which
means there are more than 200 versions corresponding to the library
package, it may not be cleaned up completely, resulting in residue
Fix#31961
---------
Co-authored-by: yeyuanjie <yecao100@126.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Currently, Gitea supports title and body query parameters when creating
new issues, allowing pre-filling those fields via URL parameters.
However, similar support for pull requests (PRs) does not exist.
This feature adds support for the title, body, and quick_pull query
parameters in the new pull request creation page. These parameters work
similarly to GitHub’s behavior, allowing users to pre-populate the PR
title and body, and optionally expand the PR creation form
automatically.
By supporting these query parameters, it improves the usability and
automation capabilities when creating pull requests via direct URLs,
aligning Gitea more closely with GitHub’s user experience.
---------
Co-authored-by: root <root@DESKTOP-UPANUTP>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Add some missing (optional) fields for nuget v2, and sort the fields
to make it easier to maintain
2. Add missing "platform" for rubygems: `VERSION-PLATFORM` and
`VERSION_PLATFORM`
Co-authored-by: Giteabot <teabot@gitea.io>
`UpdateAllCols` is dangerous, the columns should be updated when
necessary.
This PR replaces some `updateRepository` invokes to reduce possible
problems and wrongly updated time. Some parts have been fixed in #34388,
but some are hidden in the function `updateRepository`. Alternatively,
using `UpdateRepositoryColsNoAutoTime` to update the changed columns.
Some `UpdateRepoSize` invokes are duplicated, so they will be removed
when extracting from `updateRepository`.
When adding a link using the "Add a link" button in comment editor,
pasting a URL resulted in incorrect Markdown formatting (double
brackets) instead of replacing the placeholder text.
This fix adds a context check to prevent creating a new markdown link
when we're already inside an existing one.
Fixes#34740
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Noticed the SQL will be executed 4 times when visit the file render view
page. For a repository which have many pull requests, it maybe slow.
```SQL
2025/06/08 15:24:44 models/issues/pull_list.go:69:GetUnmergedPullRequestsByHeadInfo() [I] [SQL] SELECT * FROM `pull_request` INNER JOIN `issue` ON issue.id = pull_request.issue_id WHERE (head_repo_id = ? AND head_branch = ? AND has_merged = ? AND issue.is_closed = ? AND flow = ?) [393 main false false 0] - 2.004167ms
2025/06/08 15:24:44 models/issues/pull_list.go:69:GetUnmergedPullRequestsByHeadInfo() [I] [SQL] SELECT * FROM `pull_request` INNER JOIN `issue` ON issue.id = pull_request.issue_id WHERE (head_repo_id = ? AND head_branch = ? AND has_merged = ? AND issue.is_closed = ? AND flow = ?) [393 main false false 0] - 1.03975ms
2025/06/08 15:24:44 models/issues/pull_list.go:69:GetUnmergedPullRequestsByHeadInfo() [I] [SQL] SELECT * FROM `pull_request` INNER JOIN `issue` ON issue.id = pull_request.issue_id WHERE (head_repo_id = ? AND head_branch = ? AND has_merged = ? AND issue.is_closed = ? AND flow = ?) [393 main false false 0] - 881.583µs
2025/06/08 15:24:44 models/issues/pull_list.go:69:GetUnmergedPullRequestsByHeadInfo() [I] [SQL] SELECT * FROM `pull_request` INNER JOIN `issue` ON issue.id = pull_request.issue_id WHERE (head_repo_id = ? AND head_branch = ? AND has_merged = ? AND issue.is_closed = ? AND flow = ?) [393 main false false 0] - 935.084µs
```
This PR did a refactor to query it once only.
Benefits:
1. smaller binary size (reduces more than 1MB)
2. better control of the assets details
3. fewer unmaintained dependencies
4. faster startup if the assets are not needed
5. won't hang up editors when open "bindata.go" by accident
* Signed SSH commits can look in the UI like on GitHub, just like gpg keys today in Gitea
* SSH format can be added in gitea config
* SSH Signing worked before with DEFAULT_TRUST_MODEL=committer
`TRUSTED_SSH_KEYS` can be a list of additional ssh public key contents
to trust for every user of this instance
Closes#34329
Related #31392
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
## Summary
Fix skipping of `paths` condition in workflows triggered by tag push
events.
## Details
- Ensure workflows triggered by tag pushes bypass the `paths` filter
check.
- Prevent incorrect skipping of workflows due to `paths` conditions on
tag pushes.
- Added and updated unit tests to verify correct behavior.
Close#34511Close#34590
Add comment ID to the footnote item's id attribute to ensure uniqueness.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Extract from #34531
## Move Commit status state to a standalone package
Move the state from `structs` to `commitstatus` package. It also
introduce `CommitStatusStates` so that the combine function could be
used from UI and API logic.
## Combined commit status Changed
This PR will follow Github's combined commit status. Before this PR,
every commit status could be a combined one.
According to
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#get-the-combined-status-for-a-specific-reference
> Additionally, a combined state is returned. The state is one of:
> failure if any of the contexts report as error or failure
> pending if there are no statuses or a context is pending
> success if the latest status for all contexts is success
This PR will follow that rule and remove the `NoBetterThan` logic. This
also fixes the inconsistent between UI and API. In the API convert
package, it has implemented this which is different from the UI. It also
fixed the missing `URL` and `CommitURL` in the API.
## `CalcCommitStatus` return nil if there is no commit statuses
The behavior of `CalcCommitStatus` is changed. If the parameter commit
statuses is empty, it will return nil. The reference places should check
the returned value themselves.
The notification count is currently positioned using top/left
coordinates from its container's top/left corner. This works fine for
fixed-size containers like the bell icon.
This PR changes the positioning to use bottom/left coordinates from the
container's top/right corner instead. This improvement is needed when
placing notification counts on text that can vary in size due to
different languages or fonts.
The bell and stopwatch should look the same after this change.
---
*Sponsored by Kithara Software GmbH*
Co-authored-by: Marcel Haß <m.hass@kithara.com>
If user leaves the page, the context will become cancelled, so that the
update process maybe terminal in an unexpected status. This PR haven't
resolve the problem totally. It uses a background context to not cancel
the update process even if the user leaved the pull request view page.
Fix#31779
Fixes https://github.com/go-gitea/gitea/issues/34560
explanation of the bug in the issue
setting `issue.isLabelsLoaded = false` before calling `deleteIssueLabel`
guarantee we will load the new state of the labels into the issue object
before sending it in the webhook.
Previously, pressing the down arrow key on the last item of a list would
incorrectly load the latest page when not release key. This commit
corrects the logic to ensure that the next page is loaded as intended.
`GetIssuesLastCommitStatus` will revoke `GetIssuesAllCommitStatus` but
it has been invoked. The `CommitStatus` template variable has never been
used in notification subscription page so that it could be removed.
Similar to #34544, this PR changes the `opts` argument in
`SearchRepositoryByName()` to be passed by value instead of by pointer,
as its mutations do not escape the function scope and are not used
elsewhere. This simplifies reasoning about the function and avoids
unnecessary pointer usage.
This insight emerged during an initial attempt to refactor
`RenderUserSearch()`, which currently intermixes multiple concerns.
---------
Co-authored-by: Philip Peterson <philip-peterson@users.noreply.github.com>
This fixes 3 issues I encountered when debugging problems with our LDAP sync:
1. The comparison of the hashed image data in `IsUploadAvatarChanged` is
wrong. It seems to be from before avatar hashing was changed and unified
in #22289. This results in the function always returning `true` for any
avatars, even if they weren't changed.
2. Even if there's no avatar to upload (i.e. no avatar available for the
LDAP entry), the upload function would still be called for every single
user, only to then fail, because the data isn't valid. This is
unnecessary.
3. Another small issue is that the comparison function (and thus hashing
of data) is called for every user, even if there is no avatar attribute
configured at all for the LDAP source. Thus, I switched the condition
nesting, so that no cycles are wasted when avatar sync isn't configured
in the first place.
I also added a trace log for when there is actually a new avatar being
uploaded for an existing user, which is now only shown when that is
actually the case.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
If the message from form.MergeMessageField is empty, we will miss a "\n"
between the title and the "Co-authored-by:" line. The title and message
should have a blank line between of them.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix the issue where the line-button fails to work after selecting a file
from the file tree.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds "View workflow file" to Actions list page, and replaces the
redundant link.
Related #34530
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR changes the `opts` argument in `SearchUsers()` to be passed by
value instead of by pointer, as its mutations do not escape the function
scope and are not used elsewhere. This simplifies reasoning about the
function and avoids unnecessary pointer usage.
This insight emerged during an initial attempt to refactor
`RenderUserSearch()`, which currently intermixes multiple concerns.
Co-authored-by: Philip Peterson <philip-peterson@users.noreply.github.com>
- Change CreateVariable API response status from 204 No Content to 201
Created
- Update related integration tests to expect 201 Created instead of 204
No Content
## ⚠️ BREAKING ⚠️
Change the response status code of the Create Variable API under both
Org and Repo levels to `201` instead of 204.
API SDK: https://gitea.com/gitea/go-sdk/pulls/713
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
postgres 12 is end of life since 6 months. 13 and above are still
supported but I think it's overall better if we test a more recent
version of postgres because that's what new users will be running on.
Ref: https://endoflife.date/postgresql
The tags synchronization is very slow for a non-mirror repository with
many tags especially forking. This PR make all repositories' tags
synchronization use the same function and remove the low performance
synchronization function. The commit count of tag now will not be stored
into database when syncing. Since the commits count will always be read
from cache or git data, the `NumCommits` in the release table will be
updated for the first read from git data.
* repository deletion, delete ephemeral runners with active tasks as
well skips regular cleanup
* user deletion, delete ephemeral runners with active tasks as well
skips regular cleanup
* delete ephemeral runners once status changes to done
* You no longer see used ephemeral runners after the task is done
* if you see one the cron job takes care of it
- Add support for filtering commits by date range via new "since" and
"until" parameters
- Update API endpoints and command logic to handle the new parameters
for fetching commits within given dates
- Extend API documentation and Swagger specs to describe the new "since"
and "until" query parameters
- Refactor related function signatures and implementations to accept and
pass "since" and "until" values
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
This PR changes 3rd party notifications wording on a PR review that
requests changes and can be considered a follow up for #5858 to also fix
#5857 in 3rd party notifications.
The difference in the actual notification would be the following:
```diff
- Pull request review rejected
+ Pull request review changes requested
```
While this is a simple string change at first look, it has a deeper UX
meaning.
# Motivation
We could observe that some developers are hesitant to press the "Request
changes" button since their peers first see that their changes were
rejected, thus a more appropriate wording that also falls in line with
the meaning and UI would be beneficial.
## Meaning
Pressing the `Request changes` button in a PR review means that as a
reviewer you are willing to merge the general change in a PR if changes
requested review comments are implemented.
Rejecting a PR on the other hand would be equivalent with closing it
since that change isn't welcome at all (e.g. out of scope feature).
## Sync with UI
The UI button says `request changes` and the other options
## Considered Problems
This might break some automation for users who rely on string matching.
* mssql does not support fetching 0 repositories
* remove paging by NumRepos that might be 0
* extend admin api test to purge user 2
Fixes#34448
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
In the comment editor, there is a bug in Firefox where the scroll
position unexpectedly moves up, which is annoying. This is not
reproducible in Chrome and Safari. To reproduce here are some steps:
- Go into an editable issue
- Scroll page to bottom
- Focus the textarea and press Return many times, causing the textarea
to get a scrollbar
- Scroll page to bottom again
- Press Return once more
- Page should not scroll up.
This fixes the bug by adding a temporary margin, and I verified it works
in all browsers.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The "autofocus" was abused or misbehaved:
1. When users visit a page but they are not going to change a field,
then the field shouldn't get "autofocus"
* the "auth" / "user" page: in most cases, users do not want to change
the names
* see also the GitHub's "settings" page behavior.
2. There shouldn't be duplicate "autofocus" inputs in most cases, only
the first one focuses
3. When a panel is shown, the "autofocus" should get focus
* "add ssh key" panel
This PR fixes all these problems and by the way remove duplicate
"isElemHidden" function.
Issue: After switching the default branch, other branches are still
compared against the old default branch due to outdated divergence
cache.
Change: Clear the divergence cache in SetRepoDefaultBranch to ensure
correct comparisons against the new default branch.
Fixes#34369
Files that should be stored in LFS and are uploaded/edited from the API
or web UI aren't stored in LFS. This may be a regression from #34154.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds the label _state_ to the metric _gitea_users_. With the
change, _gitea_users_ would be reported like this:
```
...
# HELP gitea_users Number of Users
# TYPE gitea_users gauge
gitea_users{state="active"} 20
gitea_users{state="inactive"} 10
...
```
The metrics above would be from a Gitea instance with 30 user accounts.
20 of the accounts are active and 10 of the accounts are not active.
Resolve#34325
In the Gitea GUI, the user can see the time that _AccessTokens_ and
_PublicKeys_ were last used. This information is not returned by the
_/users/{username}/tokens_ and _/user/keys_ endpoints in the API. This
PR adds the missing data.
The time of last usage for for _tokens_ & _keys_ seem to be stored in
the _Updated_ field of the structs internally. For consistency, I have
used the name _updated_at_ for the new field returned by the _API_.
However, for the _API_ user, I don't think that name reflects the data
returned, as I believe it is the time of last usage. I propose that we
use the name _last_used_at_ instead. Let's hear reviewers opinion on
that.
* PublicKey
1. _last_used_at_: string($date-time)
* AccessToken
1. _created_at_: string($date-time) (for parity with public keys)
2. _last_used_at_: string($date-time)
Fix#34313
If archive downloads are are disabled using
_DISABLE_DOWNLOAD_SOURCE_ARCHIVES_, archive links are still returned by
the API.
This PR changes the data returned, so the fields _zipball_url_ and
_tarball_url_ are omitted if archive downloads have been disabled.
Resolve#32159
Fix#34224
The previous implementation in #33744 will get the pushed commits
changed files. But it's not always right when push a merged commit. This
PR reverted the logic in #33744 and will always get the PR's changed
files and get code owners.
Fix#880
Design:
1. A global setting `security.TWO_FACTOR_AUTH`.
* To support org-level config, we need to introduce a better "owner
setting" system first (in the future)
2. A user without 2FA can login and may explore, but can NOT read or
write to any repositories via API/web.
3. Keep things as simple as possible.
* This option only aggressively suggest users to enable their 2FA at the
moment, it does NOT guarantee that users must have 2FA before all other
operations, it should be good enough for real world use cases.
* Some details and tests could be improved in the future since this
change only adds a check and seems won't affect too much.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* fixes a fixture status to upload confirmed
* add another fixture as noise to break tests as soon they are exposed
to api
* v4 delete test added check that artifact is no longer visible in
internal api with status pending delete
* removal of http 404 on empty list: actions/upload-artifact@v4 now
backoff on http 404 of ListArtifacts endpoint
* fixes artifacts with pending delete etc. are able to be found and
downloaded if the storage is not freed
Previously we would always leave 80px space before the page footer, but
this is problematic with small viewport heights on projects page for
example. I think it' ideal that we use `--page-spacing` which is already
in use for spacing on top of the page.
The `secondary-nav` margin is also adjusted as I see no value why this
shouldn't be the same value.
`[repository.pull-request] DELAY_CHECK_FOR_INACTIVE_DAYS` is a new
setting to delay the mergeable check for pull requests that have been
inactive for the specified number of days.
This avoids potentially long delays for big repositories with many pull
requests. and reduces system load overall when there are many
repositories or pull requests.
When viewing the PR, checking will start immediately and the PR merge
box will automatically reload when complete. Accessing the PR through
the API will also start checking immediately.
The default value of `7` provides a balance between system load, and
keeping behavior similar to what it was before both for users and API
access. With `0` all conflict checking will be delayed, while `-1`
always checks immediately to restore the previous behavior.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds an API POST endpoint under `/repos/{owner}/{repo}/file-contents`
which receives a list of paths and returns a list of the contents of
these files.
This API endpoint will be helpful for applications like headless CMS
(reference: https://github.com/sveltia/sveltia-cms/issues/198) which
need to retrieve a large number of files by reducing the amount of
needed API calls.
Close#33495
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This pull request adds a GitHub-compatible API endpoint to lock and
unlock an issue.
The following routes exist now:
- `PUT /api/v1/repos/{owner}/{repo}/issues/{id}/lock` to lock an issue
- `DELETE /api/v1/repos/{owner}/{repo}/issues/{id}/lock` to unlock an issue
Fixes#33677Fixes#20012
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This fixes issue #27847 where regular expression allowed email address
to start with special symbols. Valid email addresses should start with
alphanumeric character, and as such will be rendered as email.
Added test cases from the bug report to validate, such input will not be
rendered anymore as email address.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#33197
Improve the rendering of code blocks in markdown content
for better readability and UI stability across screen sizes.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Implements runner apis based on
https://docs.github.com/en/rest/actions/self-hosted-runners?apiVersion=2022-11-28#list-self-hosted-runners-for-an-organization
- Add Post endpoints for registration-token, google/go-github revealed
this as problem
- We should deprecate Get Endpoints, leaving them for compatibility
- Get endpoint of admin has api path /admin/runners/registration-token
that feels wrong, /admin/actions/runners/registration-token seems more
consistent with user/org/repo api
- Get Runner Api
- List Runner Api
- Delete Runner Api
- Tests admin / user / org / repo level endpoints
Related to #33750 (implements point 1 and 2)
Via needs discovered in #32461, this runner api is needed to allow
cleanup of runners that are deallocated without user interaction.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Using existing "content" variable in `swift.go`
2. Do not report 500 server error in `GetPullDiffStats` middleware,
otherwise a PR missing ref won't be able to view.
3. Fix the abused "label button" when listing commits, there was too
much padding space, see the screenshot below.
Updated the quote insertion logic so that it adds one more line break
(`\n`) work like Github. This way, the cursor lands on a new line and
the user's reply is no longer interpreted as part of the quote.
Fixes#34177
This adds a middleware for overload protection that is intended to help protect against malicious scrapers.
It does this via [`codel`](https://github.com/bohde/codel), which will perform the following:
1. Limit the number of in-flight requests to some user-defined max
2. When in-flight requests have reached their begin queuing requests.
Logged-in requests having priority above logged-out requests
3. Once a request has been queued for too long,
it has a probabilistic chance to be rejected based on how overloaded the entire system is.
When a server experiences more traffic than it can handle,
this keeps latency low for logged-in users and rejects just
enough requests from logged-out users to not overload the service.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Git authorization was not taking into account multiple token feature,
leading to auth failures
Closes: https://github.com/go-gitea/gitea/issues/34141
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#33544
Adds two new api endpoints to list a versions of a package and to get
the latest version of a package by API.
⚠️ BREAKING ⚠️
the `size` field for this endpoint changes from `Size` to `size`.
Fix#34188
The name "FileName" is ambiguous: sometimes it is "base name without
path", sometimes it is "full name with path".
The ambiguous name causes various problems.
This PR clarifies the usage: `FileTreePath`: the full name with path.
This adds a cache for common package queries in `GetPackageDescriptor`.
Code which needs to process a list of packages benefits from this
change. This skips 350 queries in the package integration tests for
example.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Allows admins and org owners to change org member public status.
Before, this would return `Error 403: Cannot publicize another member`
despite the fact that the same user could make the same change through
the GUI.
Fixes#28372
---------
Co-authored-by: Tomáš Ženčák <zencak@ica.cz>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Optimized the overflow-menu:
1. Close the tippy when a menu item inside the tippy is clicked.
2. When a menu item inside the tippy is selected, move the active state
of the menu to the tippy's button.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR moved git attributes related code to `modules/git/attribute` sub
package and moved language stats related code to
`modules/git/languagestats` sub package to make it easier to maintain.
And it also introduced a performance improvement which use the `git
check-attr --source` which can be run in a bare git repository so that
we don't need to create a git index file. The new parameter need a git
version >= 2.40 . If git version less than 2.40, it will fall back to
previous implementation.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: yp05327 <576951401@qq.com>
This PR will cross-publish the release, rc, and nightly images from
`docker.io` to `ghcr.io` as docker hub has imposed rate-limiting
Signed-off-by: Allen Conlon <software@conlon.dev>
Fix#2616
This PR adds a new sort option for exclusive labels.
For exclusive labels, a new property is exposed called "order", while in
the UI options are populated automatically in the `Sort` column (see
screenshot below) for each exclusive label scope.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
In the file tree, the icons are not vertically centered, which affects
the overall visual consistency.
Currently, the icons of submodules and symlinks do not adopt the value
of entryIcon, resulting in inconsistent icon display.
before:
after:
---------
Co-authored-by: silverwind <me@silverwind.io>
fixes#34145
Edited all locations to actually be correct.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
When list commits, some of the commits authors are the same at many
situations. But current logic will always fetch the same GPG keys from
database. This PR will cache the GPG keys, emails and users for the
context so that reducing the database queries.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR uniform all temporary directory usage so that it will be easier
to manage.
Relate to #31792
- [x] Added a new setting to allow users to configure the global
temporary directory.
- [x] Move all temporary files and directories to be placed under
os.Temp()/gitea.
- [x] `setting.Repository.Local.LocalCopyPath` now will be
`setting.TempPath/local-repo` and the customized path is removed.
```diff
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;[repository.local]
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;
-;; Path for local repository copy. Defaults to TEMP_PATH + `local-repo`, this is deprecated and cannot be changed
-;LOCAL_COPY_PATH = local-repo
```
- [x] `setting.Repository.Upload.TempPath` now will be
`settting.TempPath/uploads` and the customized path is removed.
```diff
;[repository.upload]
-;;
-;; Path for uploads. Defaults to TEMP_PATH + `uploads`
-;TEMP_PATH = uploads
```
- [x] `setting.Packages.ChunkedUploadPath` now will be
`settting.TempPath/package-upload` and the customized path is removed.
```diff
;[packages]
-;;
-;; Path for chunked uploads. Defaults it's `package-upload` under `TEMP_PATH` unless it's an absolute path.
-;CHUNKED_UPLOAD_PATH = package-upload
```
- [x] `setting.SSH.KeyTestPath` now will be
`settting.TempPath/ssh_key_test` and the customized path is removed.
```diff
[server]
-;;
-;; Directory to create temporary files in when testing public keys using ssh-keygen,
-;; default is the system temporary directory.
-;SSH_KEY_TEST_PATH =
```
TODO:
- [ ] setting.PprofDataPath haven't been changed because it may need to
be kept until somebody read it but temp path may be clean up any time.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR tries to finally fix the bug mentioned in #30011 and #15504,
where the user repo limit is checked when creating a repo in an
organization.
Fix#30011
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: TheFox0x7 <thefox0x7@gmail.com>
Fix#28144
To make the resources will be cleanup once failed. All repository
operations now follow a consistent pattern:
- 1. Create a database record for the repository with the status
being_migrated.
- 2. Register a deferred cleanup function to delete the repository and
its related data if the operation fails.
- 3. Perform the actual Git and database operations step by step.
- 4. Upon successful completion, update the repository’s status to
ready.
The adopt operation is a special case — if it fails, the repository on
disk should not be deleted.
- Update selected dependencies.
- Ran `make svg && git add --all`.
- Tested mermaid and swagger.
- Mark `fileicon` assets as generated so they don't spam the diff.
- Webpack is not upgraded because it has some regression.
- Update README.md to include links to Traditional and Simplified
Chinese translations.
- Add README.zh-cn.md file containing the Simplified Chinese version of
the README.
- Add README.zh-tw.md file containing the Traditional Chinese version of
the README.
- Delete README_ZH.md file.
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Extract from #33934
In the same goroutine, we should reuse the exist cat file sub process
which exist in `git.Repository` to avoid creating a unnecessary
temporary subprocess.
This PR reuse the exist cate file writer and reader in
`getCommitFromBatchReader`.
It also move `prepareLatestCommitInfo` before creating dataRc which will
hold the writer so other git operation will create a temporary cat file
subprocess.
Fixes [#34027](https://github.com/go-gitea/gitea/issues/34027)
Discord does not allow for description bigger than 2048 bytes. If the
description is bigger than that it will throw 400 and the event won't
appear in discord. To fix that, in the createPayload method we now slice
the description to ensure it doesn’t exceed the limit.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Fix#33972
* Use consistent path resolving for links and medias.
* No need to make the markup renders to resolve the paths, instead, the
paths are all correctly resolved in the "post process" step.
* Fix#33274
* Since 1.23, all paths starting with "/" are relative to current render
context (for example: the current repo branch)
* Introduce `/:root/path-relative-to-root`, then the path will be
rendered as relative to "ROOT_URL"
Fix#32886
Add `last_committer_date` and `last_author_date` in the content API
which is not implemented by Github API v3 at the moment.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR updates the English localization messages
`password_username_disabled` and `password_full_name_disabled` to
replace "their" with "your", making it clear that the messages refer to
the currently signed-in user.
Adds the `flat-square` style to action badges. Styles can be selected by
adding `?style=<style>` to the badge endpoint. If no style query is
given, or if the query is invalid, the style defaults to `flat`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Make the material icon falls back to basic theme correctly
2. Remove `TestAttributeReader`, the problem has been resolved.
3. Fix `toggleElem` bug and add tests
The pull request list API is slow, for every pull request, it needs to
open a git repository. Assume it has 30 records, there will be 30 sub
processes back because every repository will open a git cat-file --batch
sub process. This PR use base git repository to get the head commit id
rather than read it from head repository to avoid open any head git
repository.
Fix the typo on the `filter_assginee_no_assigne` key used in
translations.
The typo itself doesn't produce a bug (as it's there both on the code
and on the locales)
Side Note: Github UI is not the best to bulk change this :/ Squashing
commits on the PR should be adequate.
Closes#34076 .
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds a toggleClass function in dom.ts, aiming to implement DOM
class toggling functionality.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#33966
```
;; User must sign in to view anything.
;; It could be set to "expensive" to block anonymous users accessing some pages which consume a lot of resources,
;; for example: block anonymous AI crawlers from accessing repo code pages.
;; The "expensive" mode is experimental and subject to change.
;REQUIRE_SIGNIN_VIEW = false
```
The doctor storage check reconstructs the lfs oid by producing a string
where the path separator is stripped
ab/dc/efg -> abdcefg. Windows however uses a backslash and thus the
ReplaceAll call doesn't produce the correct oid resulting in all lfs
objects being classed as orphaned.
This PR allows this to be more OS agnostic.
Closes#34039
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow #33127Fix#8649, fix#639
This is a complete solution. A repo unit could be set to:
* Anonymous read (non-signed-in user)
* Everyone read (signed-in user)
* Everyone write (wiki-only)
When a team have no code unit permission of a repository, the member of
the team should not view activity contributors, recent commits and code
frequrency.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The current action status badge are looking different from most other
badges renders, which is especially noticeable when using them along
with other badges. This PR updates the action badges to match the
commonly used badges from other providers.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Follow #33127
This PR add backend logic and test for "anonymous access", it shares the
same logic as "everyone access", so not too much change.
By the way, split `SettingsPost` into small functions to make it easier
to make frontend-related changes in the future.
Next PR will add frontend support for "anonymous access"
On the list page, labels and milestones do not serve as a switch-tab.
Instead, they function as page navigation. The switch-tab is only
appropriate for use on the labels and milestones pages.
And fix projects page layout.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
fixes an issue where user is unable to create new repository in
organization via UI if repository limits are in place and user has
exhausted them for their own namespace.
closes: https://github.com/go-gitea/gitea/issues/15504
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#34022 , #33550
This error message always appears when using the `check-attr` command,
even though it works correctly.
The issue occurs when the stdin writer is closed, so I added a special
case to handle and check the error message when the exit code is 1.
* reuse recoverable error checks across mirror_pull
* add new cases for 'cannot lock ref/not our ref' (race condition in
fetch) and 'Unable to create/lock"
* move lfs sync right after commit graph write, and before other
maintenance which may fail
* try a prune for 'broken reference' as well as 'not our ref'
* always sync LFS right after commit graph write, and before other
maintenance which may fail
This handles a few cases where our very large and very active
repositories could serve mirrored git refs, but be missing lfs files:
## Case 1 (multiple variants): Race condition in git fetch
There was already a check for 'unable to resolve reference' on a failed
git fetch, after which a git prune and then subsequent fetch are
performed. This is to work around a race condition where the git remote
tells Gitea about a ref for some HEAD of a branch, then fails a few
seconds later because the remote branch was deleted, or the ref was
updated (force push).
There are two more variants to the error message you can get, but for
the same kind of race condition. These *may* be related to the git
binary version Gitea has access to (in my case, it was 2.48.1).
## Case 2: githttp.go can serve updated git refs before it's synced lfs
oids
There is probably a more aggressive refactor we could do here to have
the cat-file loop use FETCH_HEAD instead of relying on the commit graphs
to be committed locally (and thus serveable to clients of Gitea), but a
simple reduction in the occurrences of this for me was to move the lfs
sync block immediately after the commit-graph write and before any other
time-consuming (or potentially erroring/exiting) blocks.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The old logic is incomplete. See the comment for the improved logic.
Fix#34011
And more fixes:
1. use empty "alt" for images, otherwise the width is not right when the
image fails to load
2. remove the "dropdown icon" patch, because it has been clearly done in
"dropdown.js" now
3. remove the "dropdown filtered item" patch, added a clear callback,
and improve the logic
4. fix global init when a node is removed and added back gain (eg: the
"cherry pick" dialog with a dropdown)
blevesearch is skipped because it causes errors
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
1. Ignore empty inputs in `UnmarshalHandleDoubleEncode`
2. Ignore non-existing `stateEvent.User` in gitlab migration
3. Enable `release` and `wiki` units when they are selected in migration
4. Sanitize repo name for migration and new repo
The pagination on the user dashboard sounds unnecessary, this will
change it to a prev/next buttons. For instances with around `10 million`
records in the action table, this option affects how the user dashboard
is loaded on first visit.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This change targets https://github.com/go-gitea/gitea/issues/32663
We drop the hardcoded timeout of 60 seconds for requests to the internal
hook api. With this change the timeout is completly removed.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Two SQLs are very slow when `action` table have over 5M records.
```
database duration=1.8881s db.sql="SELECT created_unix DIV 900 * 900 AS timestamp, count(user_id) as contributions FROM `action` WHERE user_id=? AND act_user_id=? AND (created_unix > ?) GROUP BY timestamp ORDER BY timestamp"
database duration=1.5408s db.sql="SELECT count(*) FROM `action` WHERE (user_id = ?) AND (is_deleted = ?)"
```
This will cache the count for the first loading or when the activities
changed.
When there are over 5M records on `action` table, the heatmap on
dashboard is very slow as below SQL.
```
database duration=1.8881s db.sql="SELECT created_unix DIV 900 * 900 AS timestamp, count(user_id) as contributions FROM `action` WHERE user_id=? AND act_user_id=? AND (created_unix > ?) GROUP BY timestamp ORDER BY timestamp"
```
This PR add a new index for `action` table with columns `user_id`,
`act_user_id` and `created_unix` so that this query will become about 6
times faster than before.
- Update all updateable dependencies
- Add a few more unupgradable ones to updates blocklist
- Adapt to breaking changes
- Update to typescript 5.8, enable `erasableSyntaxOnly` which
necessitated a change because of forbidden syntax
- Misc cleanups
- Tested htmx, easymde, swagger, chart.js
Currently the organisation feed only includes items for public
repositories (for non-administrators). This pull requests adds
notifications from private repositories to the organisation-feed (for
accounts that have access to the organisation).
Feed-items only get shown for repositories where the users team(s)
should have access to, this filtering seems to get done by some existing
code.
Needs some tests, but am unsure where/how to add them.
Before:
After:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Resolve#29328
This pull request introduces a file tree on the left side when reviewing
files of a repository.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Make `SearchMode` have default value if it is empty
* Add some comments for the "match" queries
* Fix a copy-paste mistake in `buildMatchQuery` (`db.go`)
* Add missing `q.Analyzer = repoIndexerAnalyzer`, it is in old code,
although I do not see real difference ....
Fix#24623
Major changes:
1. Redirect `/owner/repo/blob/*` requests to `/owner/repo/src/commit/*`
(like GitHub)
2. Add a "view file diff" link (see screenshot below)
3. Refactor "AssertHTMLElement" to generic, now we can accurately assert
existence or number.
4. Add more tests
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Extract from #28966
This PR uses `gitrepo.IsRepositoryExist` instead of `util.IsExist` to
detect whether the repository exist in disk. This will move `RepoPath`
detail behind of package `gitrepo` to make it easier to do possible
changes where storing the repositories.
No code change
Fix#33490
It will only read the changed file on the pushed commits but not all the
files of this PR.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
We would never update or build fomantic again, we have forked it as a
private library long time ago.
So just put the JS and CSS files in "fomantic/build" into git. And use
"import" to use them.
Remove "form.js", rewrite "tab" component.
All source code is from official Fomantic UI build. Will apply patches
in separate PRs.
when the passkey auth and register was disabled
the unwanted ui container was show
Co-authored-by: Vinoth414 <103478407+Vinoth414@users.noreply.github.com>
Fix#33358, fix#21970
This adds a step in the `GitDiffForRender` that does syntax highlighting for the
entire file and then only references lines from that syntax highlighted
code. This allows things like multi-line comments to be syntax
highlighted correctly.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The diff stats are no longer part of the diff generation.
Use `GetDiffShortStat` instead to get the total number of changed files,
added lines, and deleted lines.
As such, `gitdiff.GetDiff` can be simplified:
It should not do more than expected.
And do not run "git diff --shortstat" for pull list. Fix#31492
Make "initRepoBranchTagSelector" to use new init framework and fix the
abused "js-branch-tag-selector" styles
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Make buttons to use new init framework
* "js-toggle-commit-body"
* "show-panel/hide-panel/show-modal"
* "copy-content"
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Add some "render-content" classes to "markup" elements when the
content is rendered
2. Use correct "markup" wrapper for "preview" (but not set that class on
the tab)
3. Remove incorrect "markup" class from LFS file view, because there is
no markup content
* "edit-diff" is also removed because it does nothing
5. Use "initPdfViewer" for PDF viewer
6. Remove incorrect "content" class from milestone markup
7. Init all ".markup" elements by new init framework
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
`go vet` implicitely runs as part of `go test`, but we already have
`make lint-go-vet`, so we were essentially running it twice. This should
hopefully make `go test` slightly faster.
Ref: https://pkg.go.dev/cmd/go#hdr-Test_packages
> As part of building a test binary, go test runs go vet
Follow up #33748
Now there are 3 "global" functions:
* registerGlobalSelectorFunc: for all elements matching the selector, eg: `.ui.dropdown`
* registerGlobalInitFunc: for `data-global-init="initInputAutoFocusEnd"`
* registerGlobalEventFunc: for `data-global-click="onCommentReactionButtonClick"`
And introduce `initGlobalInput` to replace old `initAutoFocusEnd` and
`attachDirAuto`, use `data-global-init` to replace fragile
`.js-autofocus-end` selector.
Another benefit is that by the new approach, no matter how many times
`registerGlobalInitFunc` is called, we only need to do one
"querySelectorAll" in the last step, it could slightly improve the
performance.
This is a X-GitHub Header port
* repository for repository webhooks (matches GitHub)
* organization for organization webhooks (matches GitHub)
* user for user webhooks (Gitea specific)
* system for system webhooks (Gitea specific)
* default for default hooks needs testing (Gitea specific)
- `X-Gitea-Hook-Installation-Target-Type`
- `X-GitHub-Hook-Installation-Target-Type`
1. Rewrite `dirauto.ts` to `observer.ts`.
* We have been using MutationObserver for long time, it's proven that it
is quite performant.
* Now we extend its ability to handle more "init" works.
2. Use `observeAddedElement` to init all non-custom "dropdown".
3. Use `data-global-click` to handle click events from dynamically
loaded elements.
* By this new approach, the old fragile selector-based
(`.comment-reaction-button`) mechanism is removed.
4. By the way, remove unused `.diff-box` selector, it was abused and
never really used.
A lot of FIXMEs in "repo-diff.ts" are completely fixed, newly loaded
contents could work as expected.
It seems something broken `google/go-licenses` (maybe related to go
1.24), and my findings are in
https://github.com/google/go-licenses/issues/128#issuecomment-2689753365.
I think it's best we disable this generation for now until a better
solution is found.
Also, enable showing stderr output so we can actually debug this thing.
For reference, these are the errors that currently apparently break the
tool:
```
E0228 05:15:27.005759 13158 library.go:117] Package text/tabwriter does not have module info. Non go modules projects are no longer supported. For feedback, refer to https://github.com/google/go-licenses/issues/128.
E0228 05:15:27.005776 13158 library.go:117] Package net/http/fcgi does not have module info. Non go modules projects are no longer supported. For feedback, refer to https://github.com/google/go-licenses/issues/128.
F0228 05:15:27.028122 13158 main.go:77] some errors occurred when loading direct and transitive dependency packages
```
Modify Diff View FileTree to show all files
## Changes
* removes Show Status button on diff
* uses `git diff-tree` to generate the file tree for the diff
* doesn't reload the diff tree each time we load more files in the
preview
* selecting and unloaded file will keep loading until that file is
loaded
* removes `DiffFileList.vue` and "Show Stats" in diff options
## Open Questions
* selecting and unloaded file will keep loading until that file is
loaded. Is this behaviour okay? It matches what github does.
### Demo
In this demo I set `git.MAX_GIT_DIFF_FILES=1` in my `app.ini` to
demonstrate a worst case example. In most cases the behaviour isn't
nearly as jarring as we load a bunch of files at a time.
https://github.com/user-attachments/assets/72f29663-d6fc-472d-94fa-7fb5950c2836
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#33582Fix#31698
When a user login, the dashboard should load all feed belongs to him
with no any conditions. The complicated conditions should be applied
only for another user view this user's profile.
This commit fixes the docker build workflow such that semver-tagged
releases use the full semver for the OCI
`org.opencontainers.image.version` annotation, instead of using the
major version only.
This is done by changing the order of the tags that the
`docker/metadata-action` action is told to generate. Since the tags that
the action is told to generate are all of the same priority, the first
in the list will be used to set the annotation.
There is no need to fix the other two docker build workflows, i.e., (i)
the nightly releases and (ii) the rc-tagged releases. This is because
(i) the nightly releases do not get tagged with a semver, so the issue
does not exist, and (ii) rc-tagged releases only get built with one tag,
so the issue of needing to set an order of how tags are generated is
irrelevant.
Resolvesgo-gitea/gitea#33697.
1. GetUserOrgsList should "order by" lower_name
2. GetIssuePostersWithSearch should search in-case-sensitive-ly
3. LoginName should not be used as username
By the way, remove unnecessary "onGiteaRun"
Make legacy package names could be listed and add tests
---------
Co-authored-by: diana.strebkova@t-systems.com <diana.strebkova@t-systems.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace all contexts in tests with go1.24 t.Context()
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
See the FIXME comment in code. Otherwise, if a repo's issue unit is
disabled, then the PRs can't be edited anymore.
By the way, make the permission log output look slightly better.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: metiftikci <metiftikci@hotmail.com>
Gitea Actions generated target url doesn't contain host and port. So we
need to include them for external webhook visiting.
Fix#33603
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Noticed a SQL in gitea.com has a bigger load. It seems both `is_pull`
and `pin_order` are not indexed columns in the database.
```SQL
SELECT `id`, `repo_id`, `index`, `poster_id`, `original_author`, `original_author_id`, `name`, `content`, `content_version`, `milestone_id`, `priority`, `is_closed`, `is_pull`, `num_comments`, `ref`, `pin_order`, `deadline_unix`, `created_unix`, `updated_unix`, `closed_unix`, `is_locked`, `time_estimate` FROM `issue` WHERE (repo_id =?) AND (is_pull = 0) AND (pin_order > 0) ORDER BY pin_order
```
I came across a comment
https://github.com/go-gitea/gitea/pull/24406#issuecomment-1527747296
from @delvh , which presents a more reasonable approach. Based on this,
this PR will migrate all issue and pull request pin data from the
`issue` table to the `issue_pin` table. This change benefits larger
Gitea instances by improving scalability and performance.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This pull request edits the head_navbar template and adds spacing
between the icon and the text inside the sign in button of the navbar
(button which displays at the top right of Gitea's pages when the user
is not signed in).
It bugged me that there was no spacing between the button's contents so
I test ran this change quickly on my server and thought it looked a lot
better, so decided to make this pull request. Up to you to decide if you
agree that it looks better :)
* download endpoint has to use 302 redirect
* fake blob download used if direct download not possible
* downloading v3 artifacts not possible
New repo apis based on GitHub Rest V3
- GET /runs/{run}/artifacts (Cannot use run index of url due to not
being unique)
- GET /artifacts
- GET + DELETE /artifacts/{artifact_id}
- GET /artifacts/{artifact_id}/zip
- (GET /artifacts/{artifact_id}/zip/raw this is a workaround for a http
302 assertion in actions/toolkit)
- api docs removed this is protected by a signed url like the internal
artifacts api and no longer usable with any token or swagger
- returns http 401 if the signature is invalid
- or change the artifact id
- or expired after 1 hour
Closes#33353Closes#32124
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When listing commits, Gitea attempts to retrieve the actual user based
on the commit email. Querying users one by one from the database is
inefficient. This PR optimizes the process by batch querying users by
email, reducing the number of database queries.
Only show the latest version of the package in the arch repo.
closes#33534
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
In the old `pickTask`, when getting secrets or variables failed, the
task could get stuck in the `running` status (task status is `running`
but the runner did not fetch the task). To fix this issue, these steps
should be in one transaction.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Some old code use direct type-casting to get context, it causes
problems.
This PR fixes all legacy problems and use correct `ctx.Value` to get
low-level contexts.
Fix#33518
- Find the runner before deleting
- Move the main logic from `routers/web/repo/setting/runners.go` to
`routers/web/shared/actions/runners.go`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Previously yamllint would issue warnings for certain things, while still
exiting with zero. Now warnings are treated like errors and will cause
non-zero exit:
```
-s, --strict return non-zero exit code on warnings as well as errors
```
- Find the variable before updating or deleting
- Move the main logic from `routers/web/repo/setting/variables.go` to
`routers/web/shared/actions/variables.go`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Add a "No data available" message to be displayed when the list has no
data. This improves the user experience by providing clear feedback in
an empty state.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Implemented calling git diff-tree
* Ensures wrapper function is called with valid arguments
* Parses output into go struct, using strong typing when possible
`timetzdata` is already used in the docker images, this includes them
for the binary release files too.
Related to #33235 (I don't have a windows machine setup to test this
though)
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR fixes#33205.
If stars are disabled:
* The `.../repo/stars` page returns a 403 Forbidden error
* Star-related API endpoints return a 403 Forbidden error saying `Stars are disabled.`
* Same for action endpoints
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Fix incorrect `MentionCount` (actually it seems to be deadcode,
affects nothing)
2. Remove fallback sha1 support for time limit token
3. Use route middleware `reqRepoActionsWriter` for `ArtifactsDeleteView`
4. Use clearer message "Failed to authenticate user" instead of "Verify"
when auth fails
5. `tests/integration/benchmarks_test.go` is not quite right, actually
it is never used, so delete it.
6. Remove or update TODO comments
Dear Gitea team,
first of all, thanks for the great work you're doing with this project.
I'm planning to introduce Gitea at a client site, and noticed that while
there is time recording, there are no project-manager-friendly reports
to actually make use of that data, as were also mentioned by others in
#4870#8684 and #13531.
Since I had a little time last weekend, I had put together something
that I hope to be a useful contribution to this great project (while of
course useful for me too).
This PR adds a new "Worktime" tab to the Organisation level. There is a
date range selector (by default set to the current month), and there are
three possible views:
- by repository,
- by milestone, and
- by team member.
Happy to receive any feedback!
There are several possible future improvements of course (predefined
date ranges, charts, a member time sheet, matrix of repos/members, etc)
but I hope that even in this relatively simple state this would be
useful to lots of people.
<img width="1161" alt="Screen Shot 2022-05-25 at 22 12 58"
src="https://user-images.githubusercontent.com/118010/170366976-af00c7af-c4f3-4117-86d7-00356d6797a5.png">
Keep up the good work!
Kristof
---------
Co-authored-by: user <user@kk-git1>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This adds an endpoint (`/orgs/{org}/rename`) to rename organizations.
I've modeled the endpoint using the rename user endpoint --
`/admin/users/{username}/rename` -- as base.
It is the 1st time I wrote a new API endpoint (I've tried to follow the
rename users endpoint code while writing it). So feel free to ping me if
there is something wrong or missing.
Resolves#32995
---------
Signed-off-by: Bruno Sofiato <bruno.sofiato@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Both have `RejectTransfer` and `CancelTransfer` because the permission
checks are not the same. `CancelTransfer` can be done by the doer or
those who have admin permission to access this repository.
`RejectTransfer` can be done by the receiver user if it's an individual
or those who can create repositories if it's an organization.
- Some tests are wrong, this PR corrects them.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR created a mock webhook server in the tests and added integration
tests for generic webhooks.
It also fixes bugs in package webhooks and pull request comment
webhooks.
This is a follow-up to https://github.com/go-gitea/gitea/pull/33097.
When linking a submodule at a commit in either the repo view, or a diff
when adding a new submodule, link to the tree view of that submodules
intead of the individual commit. This shows the user the full tree,
instead of the diff of the commit.
This makes the assumption that the tree for a given SHA is at
`<repo_url>/tree/<sha>`. This URL format is supported by both Github &
Gitlab, but not Gitea. To fix this, add a redirect from
`<username>/<repo>/tree/<ref>` to `<username>/<repo>/src/<ref>`, so that
Gitea can support this URL structure.
Update and use their newly exported types. Tested, works.
The import path is a bit suboptimal, to be fixed once
https://github.com/github/text-expander-element/pull/75 is merged and
released.
Co-authored-by: Giteabot <teabot@gitea.io>
- Inherit stylelint config from
[`stylelint-config-recommended`](https://github.com/stylelint/stylelint-config-recommended),
removed all stylelint core rule options that were either already in
their config or disabled.
- `no-descending-specificity` diverges from their config, seems to much
work currently.
- Tweaked a few rules.
- Added
[`stylelint-define-config`](https://github.com/stylelint-types/stylelint-define-config)
so that typescript can validate the config.
Adds user facing messages to errors when submitting agit pull request
Tries to highlight the returned error more and fixes agit suggestion to
create PR on first submission.
Closes: https://github.com/go-gitea/gitea/issues/32965
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Add box-shadow to default tippy theme
- Make colors for tabs match the ones from `.ui.tabular.menu`
- Remove tippy arrow and slightly offset tooltip closer to the button
- Fix setting of `aria-haspopup` when default role is used with tippy
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. add `GetSiteCookieFlashMessage` to help to parse flash message
2. clarify `handleRepoHomeFeed` logic
3. remove unnecessary global variables, use `sync.OnceValue` instead
4. add some tests for `IsUsableUsername` and `IsUsableRepoName`
Extract from #33320
This PR uses a map instead of a struct to store webhook event
information. It removes many duplicated functions and makes the logic
clearer.
1. Add a OpenTelemetry-like shim-layer to collect traces
2. Add a simple builtin trace collector and exporter, end users could
download the diagnosis report to get the traces.
This PR's design is quite lightweight, no hard-dependency, and it is
easy to improve or remove. We can try it on gitea.com first to see
whether it works well, and fine tune the details.
---------
Co-authored-by: silverwind <me@silverwind.io>
After the RefName refactoring, the `ctx.Repo.CommitID` is only set when
there is a `RepoRefByType` middleware.
Many handlers do not use that middleware and they only use "default
branch"
Fix#33271
Suppose there is a `branch-a` in fork repo:
1. if `branch-a` exists in base repo: try to sync `base:branch-a` to `fork:branch-a`
2. if `branch-a` doesn't exist in base repo: try to sync `base:main` to `fork:branch-a`
Fix password form missing whilst linking account even with
`ENABLE_PASSWORD_SIGNIN_FORM = true`.
Remove redundant empty box in account linking sign up page when
`LinkAccountMode` is true.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Estimated time represented in hours it might be convenient to
have tracked time represented in the same way to be compared and
managed.
---------
Co-authored-by: Sysoev, Vladimir <i@vsysoev.ru>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. the error check was added for go-git, it was caused by the empty `.keep` file in the test fixtures.
2. use `PostFormValue` instead of `PostForm.Get` (`Get` needs to parse the form ahead)
3. fix incorrect container text (it should show "Images" in the header but not "OS/Arch")
4. align maven xml
5. fix closed PR color&icon
- Update all JS and PY dependencies
- Tested affected dependencies
- Disabled `async-preventdefault` lint rule because it brought up new
false-positives.
Currently, anyone with write permissions to a repo are able to rename
default or protected branches.
This change follows
[GitHub's](https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/managing-branches-in-your-repository/renaming-a-branch)
design by only allowing repo/site admins to change these branches.
However, it also follows are current design for protected branches and
only allows admins to modify branch names == branch protection rule
names. Glob-based rules cannot be renamed by anyone (as was already the
case, but we now catch `ErrBranchIsProtected` which we previously did
not catch, throwing a 500).
Move the main logic of `generateTaskContext` and `findTaskNeeds` to the
`services` layer.
This is a part of #32751, since we need the git context and `needs` to
parse the concurrency expressions.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Major changes:
1. do not sync ".keep" file during tests
2. fix incorrect route handler and empty repo handling (backported as #33253 with tests)
3. do not use `RepoRef`: most of the calls are abuses.
4. Use `git.RefType` instead of a new type definition `RepoRefType` on `context`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The template should be `repo/migrate/{service type}`
But input element `service` is not in the form.
Related: #33081
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Found while investigating #33210.
This line no longer makes sense because the form field "TagName" is
required, so this would mean that this code path would never be covered.
Because it isn't covered, we end up going down the "update release"
logic where we eventually set `Release.IsTag` to false (meaning it will
now be treated as a release instead of a tag).
This snapshot rewrites the condition to ensure that we aren't trying to
create a tag that already exists.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR fixes inconsistencies between system and default webhooks in the
Gitea API. (See also #26418)
- A system webhook is a webhook that captures events for all
repositories.
- A default webhook is copied to a new repository when it is created.
Before this PR `POST /api/v1/admin/hooks/` creates default webhooks (if
not configured otherwise) and `GET /api/v1/admin/hooks/` returns system
webhooks.
The PR introduces an optional query parameter to `GET
/api/v1/admin/hooks/` to enable selecting if either default, system or
both kind of webhooks should be retrieved. By default the flag is set to
return system webhooks keep current behaviour.
## Examples
### System Webhooks
#### Create
```
POST /api/v1/admin/hooks/
{
"type": "gitea",
"active": false,
"branch_filter": "*",
"events": [ "create", "..." ],
"config": {
"url": "http://...",
"content_type": "json",
"secret": "secret",
"is_system_webhook": true // <-- controls hook type
}
}
```
#### List
```
GET/api/v1/admin/hooks?type=system //type argument is optional here since it's the default
```
#### Others
The other relevant endpoints work as expected by referencing the hook by
id
```
GET /api/v1/admin/hooks/:id
PATCH /api/v1/admin/hooks/:id
DELETE /api/v1/admin/hooks/:id
```
### Default Webhooks
#### Create
```
POST /api/v1/admin/hooks/
{
"type": "gitea",
"active": false,
"branch_filter": "*",
"events": [ "create", "..." ],
"config": {
"url": "http://...",
"content_type": "json",
"secret": "secret",
"is_system_webhook": false // optional, as false is the default value
}
}
```
#### List
```
GET/api/v1/admin/hooks?type=default
```
#### Others
The other relevant endpoints work as expected by referencing the hook by
id
```
GET /api/v1/admin/hooks/:id
PATCH /api/v1/admin/hooks/:id
DELETE /api/v1/admin/hooks/:id
```
1. "blob" is not a "ref", it shouldn't (and not unable to) be handled by
`RepoRefByType`
2. the `/blob/{sha}` handle should use the path param "sha" directly
The `ctx.Repo.RefName` was used to be a "short name", it causes a lot of
ambiguity.
This PR does some refactoring and use `RefFullName` to replace the
legacy `RefName`, and simplify RepoAssignment
~~Waiting for the upload of screenshots~~
I have a good idea about the screenshots. I will do it later.
---------
Co-authored-by: Gary Wang <git@blumia.net>
Amended the logic for newPrefix in the MarkdownEditor to resolve
incorrect number ordering.
Fixes#33184
Attached screenshot of fixed input similar to issue
<img width="175" alt="Screenshot 2025-01-09 at 23 59 24"
src="https://github.com/user-attachments/assets/dfa23cf1-f3db-4b5e-99d2-a71bbcb289a8"
/>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Resolve#32341
~Depends on #27151~
- [x] It will display a checkbox of deleting the head branch on the pull
request view page when starting an auto-merge task.
- [x] Add permission check before deleting the branch
- [x] Add delete branch comment for those closing pull requests because
of head branch or base branch was deleted.
- [x] Merge `RetargetChildrenOnMerge` and `AddDeletePRBranchComment`
into `service.DeleteBranch`.
Follow #33045. There are two updates on `Set Merged`, which should be in
one transaction.
This also introduced some refactors for changeissuestatus to make it
more clear.
This adds links to submodules in diffs, similar to the existing link
when viewing a repo at a specific commit. It does this by expanding diff
parsing to recognize changes to submodules, and find the specific refs
that are added, deleted or changed.
Related #25888
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
close#33086
* Add a special value for "SSH_USER" setting: `(DOER_USERNAME)`
* Improve parseRepositoryURL and add tests (now it doesn't have hard
dependency on some setting values)
Many changes are just adding "ctx" and "doer" argument to functions.
By the way, improve app.example.ini, remove all `%(key)s` syntax, it
only makes messy and no user really cares about it.
Document: https://gitea.com/gitea/docs/pulls/138
This PR fixes a performance problem when reviewing a pull request in a
big instance which have many records in the `review` table.
Traditionally, we should add more indexes in that table. But since
dismissed reviews of 1 pull request will not be too many as expected in
a common repository. Filtering reviews in the memory should be more
quick .
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Underlying go library has no support for it
Fixes: https://github.com/go-gitea/gitea/issues/33121
---
I never touched frontend tests so pointers how to write them are
welcome.
This can be either fix or workaround, depending if this is something
gitea should support in the future or not. The golang side is unlikely
to get updates though.
fixes#33119
routers/web/repo/view_home.go
Calling `updateContextRepoEmptyAndStatus` will always ask the DB to
update the updated Unix attributes.
When revisiting the repo's home page, the timestamp will be updated
unexpectedly, so I added the needsUpdate variable to check whether, in
the end, the commitment to db update is necessary if columns have not
changed at all.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* htmx updates the input form on branch switch
* add workflow warning to dispatch modal
* use name if description of input is empty
* show error if workflow_dispatch not available on branch
Closes#33073Closes#33099
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
In history, Gitea could use the system config `/etc/gitconfig` because
some users said that "they might put certNonceSeed in it"
Actually, we shouldn't not use it, because it also causes conflicts
(there are already some fixes like #28848)
To make the system clear, I think it's worth to introduce the breaking
change: add `GIT_CONFIG_NOSYSTEM=1` to all git commands.
## ⚠️ BREAKING ⚠️
For most users, nothing need to do.
If you have made changes to `/etc/gitconfig` to affect Gitea's behavior,
you need to move these config options to Gitea's internal git config
file, it is usually in Gitea's `{AppDataPath}/home/.git` directory.
unset XDG_CONFIG_HOME early to enable gitea to manage git configuration.
simple error checking to satisfy the linting. Closes#33039
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. merge `repo-template.ts` into `repo-new.ts` (they are all for "/repo/create")
2. remove jquery
3. fix an anonying fomantic dropdown bug, see the comment of `onResponseKeepSelectedItem`
Closes#25898
The problem was that the default settings weren't being loaded
---------
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The latest commit cache is currently used only for listing tree files.
However, a cold start may take longer than directly invoking the Git
command. This PR addresses the issue of slow response times when
accessing raw files, improving performance in such scenarios.
```log
gitea.log:105521:2024/12/23 08:22:18 ...eb/routing/logger.go:68:func1() [W] router: slow GET /xxxx/xxxxxx/raw/commit/xxxxxxxxxxxxxxxxxxxxxxxxxxx/.editorconfig for 172.18.0.5:53252, elapsed 3526.8ms @ repo/download.go:117(repo.SingleDownload)
```
Fixes#33017
Avatar should only have offset if the `Comment` has `Content` or
`Attachment` to align with the speech bubble.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. fix incorrect tests, for example: BeanExists doesn't do assert and
shouldn't be used
2. remove unnecessary test functions
3. introduce DumpQueryResult to help to see the database rows during
test (at least I need it)
```
====== DumpQueryResult: SELECT * FROM action_runner_token ======
- # row[0]
id: 1
token: xeiWBL5kuTYxGPynHCqQdoeYmJAeG3IzGXCYTrDX
owner_id: 0
...
```
The new code structure is easier to make more improvements or
refactor, for example: change the colors to de-emphasize more, or design
some new layouts.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
user with read permission should also can create agit flow pull request.
looks this logic was broken in
https://github.com/go-gitea/gitea/pull/31033 this pull request try fix
it and add test code.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The behaviors of closing issues and reopening issues are very different.
So splitting it into two different functions makes it easier to
maintain.
- [x] Split ChangeIssueStatus into CloseIssue and ReopenIssue both at
the service layer and model layer
- [x] Rename `isClosed` to `CloseOrReopen` to make it more readable.
- [x] Add transactions for ReopenIssue and CloseIssue
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
1. do not use `{{/* */}}` to remove spaces, use `{{- -}}`
2. fix "blob_excerpt" endpoint, remove the legacy fragile code: have
tested commit diff and wiki diff
In history (from some legacy frameworks), both `:name` and `name` are
supported as path path name, `:name` is an alias to `name`.
To make code consistent, now we should only use `name` but not `:name`.
Also added panic check in related functions to make sure the name won't
be abused in case some downstreams still use them.
Extract from #32786
`git diff a..b` is equal to `git diff a b` which is different from `git
diff a...b`. For pull request, we should always
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Introduce RequestContext: is a short-lived context that is used to store
request-specific data.
RequestContext could be used to clean form tmp files, close context git
repo, and do some tracing in the future.
Then a lot of legacy code could be removed or improved. For example:
most `ctx.Repo.GitRepo.Close()` could be removed because the git repo
could be closed when the request is done.
Adds an auto-scroll/follow feature to running actions (fix#25186, fix
#28535).
When new log lines are appended and the bottom of the logs container
(`.action-view-right`) is visible at this time, the page automatically
scrolls down to the bottom of the logs.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Enable
[strictFunctionTypes](https://www.typescriptlang.org/tsconfig/#strictFunctionTypes)
2. Introduce `DOMEvent` helper type which sets `e.target`. Surely not
totally correct with that `Partial` but seems to work.
3. Various type-related refactors, change objects in
`eventsource.sharedworker.ts` to `Map`.
This PR fixes the issue https://github.com/go-gitea/gitea/issues/32223
Make the browser to show the confirm popup, as it does with other forms.
---------
Co-authored-by: Tim Wundenberg <tim@wundenbergs.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Deprecate "gopid" in log, it is not useful and requires very hacky
approach
* Remove "git.Command.SetDescription" because it is not useful and only
makes the logs too flexible
Update all go tool dependencies to latest version. WIP because I think
there are new gopls errors, would like to confirm them on CI first. Here
is from a local run:
```
modules/markup/markdown/goldmark.go:115:37-53: unnecessary type arguments
modules/markup/html.go:45:32-49: unnecessary type arguments
modules/markup/internal/renderinternal.go:20:33-49: unnecessary type arguments
modules/markup/common/linkify.go:27:32-49: unnecessary type arguments
modules/util/time_str.go:28:39-63: unnecessary type arguments
routers/web/repo/pull.go:704:19: impossible condition: non-nil == nil
modules/util/util_test.go:248:14-23: unused parameter: other
```
~~Backport because the `gxz` update might have security benefits.~~
It is mentioned in https://man.archlinux.org/man/PKGBUILD.5: 'The
variable is not allowed to contain colons, forward slashes, hyphens, or
whitespace.'
`_` is also an allowed character, and some software in the Arch Linux
AUR uses this naming convention.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
SFCs shouldn't export anything besides their component, and this
eliminates one issue with tsc, while apparently also solving a hack. It
seems to work as before, also when multiples are on the same page.
`RepoTransfer` now is at models, but if we want to move it into `repo`
model, it will depend on `Team`. So this PR also makes repo model depend
on org model to make it possible. Just refactor, no code change.
- [x] Move `DeleteOrganization` from `models/organization` to service
layer
- [x] Move `AccessibleTeamReposEnv` to `models/repo`
- [x] Move `RepoTransfer` from `models` to `models/repo`
- [x] Merge `getUserTeamIDs` and `GetUserTeamIDs`, Merge `GetUserTeams`
and `getUserTeams`.
- [x] Remove `Team`'s `Repos []*repo_model.Repository` to avoid dependency recycle.
In preparation for migrating to eslint flat config, move the config file
to javascript. Additional changes:
- `no-undef` is now disabled as it's no longer needed with typescript
- `no-restricted-globals` config is simplified
1. add/improve comments to help future readers could understand the
problem more easily.
2. add an error log to LDAP with username fallback
3. use `or` instead of `Iif` for "repo/branch_dropdown" (`Iif` was a
mistake, but it doesn't really affect the UI)
4. add `tw-font-mono` style to container digest to match dockerhub
5. fix a bug in RepoBranchTagSelector: the form is not updated when
there is no click to an item
---------
Co-authored-by: delvh <dev.lh@web.de>
## Why join
I didn’t talk about myself before, so some people may think that I am an
employee from the company. So I think it is necessary to talk about why
and how I joined.
At the begining, my boss gave me a task to find a git software which can
self hosted in on-premise. Then I found that there are not many project
which meet our needs. But finally, I found Gitea. A easy use, easy
maintenance, and without a good machine you can also run it.
At that time, I just finished my previous work which is using helm to
deploy something in K8s. So I tried to use Gitea’s helm chart to deploy
in my work PC to see whether we can use it. But soon, I found a bug, and
reported it (https://gitea.com/gitea/helm-chart/issues/382), but after
about 1 month, there’s no fix. So I try to check the source code, and I
found that it is caused by Gitea’s code and it is easy to fix it. So I
created an issue (https://github.com/go-gitea/gitea/issues/22523) in
Gitea. But unfortunately, after a long time again, it is still not
fixed. So I tried to finish it by myself.
I’m not a pro programmer, coding is just my hobby since I was 13 or 14
years old. (I will tell the reason later), I even don’t know the
workflow about the contribution of OSS, so maybe I did some bad things
at the early time, I apologize.
But the people here are very kind, at that time, I start to consider
whether it has worth to recommend to my boss. So I started to use it,
but I found more and more bugs in a short time. Japanese company is very
sensitive to it, so I gave up to recommend.
But I can try to fix them! Because I can learn too many things during
the contribution, not just about the programing but also the usage of
other tools and the general contribution rule in the world of OSS. It
let me grow up, and to become (maybe) a perfect full-stack engineer
which is my dream. (Why it is my dream? I made a wrong decision in my
college, I took/followed the advice of my parent, choosed communications
engineering instead of computer science which is my favorite thing)
# Why leave
Several days ago, there’s an
[article](https://juejin.cn/post/7446578471901626420#comment) came into
my eye. Something about JiHu (GitLab Ltd in China) start to file a
lawsuit to the company which is using GitLab CE version which is under
MIT License. So people start to find other git service/application to
avoid it. And in the this article, a project called Fogejo is mentioned.
It says it is a hard-fork of Gitea. But I don’t know the meaning of
`hard-fork`, so I access the home page of this project to find where it
comes from.
Finally, I found it here:
https://forgejo.org/compare-to-gitea/#why-was-forgejo-created. They
said:
> As of early 2024, Forgejo is developed independently of Gitea, as a
“hard-fork”.
`hard-fork` has a quotation, so the meaning is not the original meaning
of it, but they said `as`, which means `like` or `similar` I think. So
just focus on the words before `as` is ok, because `hard-fork` is a
simile, `As of early 2024, Forgejo is developed independently of Gitea`
is what they want to say.
In my mind, this means:
since early 2024 Forgejo’s codes (new changes) are all written by
themselves, and emphasize that these changes are not related to Gitea,
because they can simply say `As of early 2024, Forgejo is developed
independently, as a “hard-fork”`
But after I check the commit history, I can still find some strange
commits in recent month:
https://codeberg.org/forgejo/forgejo/commits/branch/forgejo/search?q=author%3Ayp05327&all=
The author is me, but the commit is signed by someone I even never
heard.
Considering the words they said above, it feels/sounds like my work has
become their work. Although Gitea is under MIT license, is this allowed
in the OSS world?
Even it is allowed, I can not accept it personally.
So I created a issue to ask them:
https://codeberg.org/forgejo/forgejo/issues/6236https://codeberg.org/forgejo/discussions/issues/251
Finally, it seems that they understood the problem and promised to
improve it. But I also required a public statement to explain it which
means they need to apologize, otherwise it is hard to the users who
believe these are all their work know it, and it seems they ignored some
of my words again? So it is hard for me to believe they will really make
changes and post the apologize. If they did, I will consider to come
back. Otherwise, I think there’s no worth to continually contribute to
any OSS project, so I decided to leave.
ps: TOC voting is still ongoing, please remove me from the list. And I
will leave the organization after the merge.
At the end, thanks to all people who have helped me to finish the
contribution and teach me new knowledges.
Fixes 79 typescript errors. Discovered at least two bugs in
`notifications.ts`, and I'm pretty sure this feature was at least
partially broken and may still be, I don't really know how to test it.
After this, only like ~10 typescript errors remain in the codebase but
those are harder to solve.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. restore background color
2. fix border radius on top/bottom and on hover
3. parent link is now full-row again, much easier to click
4. parent link now uses directory icon, matching github
5 changed grid layout to remove auto width on file name column which could get too small.
6. mobile layout now shows more of the filename.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#32795
If a job uses a matrix, multiple `ActionRunJobs` may have the same
`JobID`. We need to merge the outputs of these jobs to make them
available to the jobs that need them.
Mac's git installation ships with a system wide config that configures
the credential helper `osxkeychain`, which will prompt the user with a
dialog.
```
$ git config list --system
credential.helper=osxkeychain
```
By setting the environment variable
[`GIT_CONFIG_NOSYSTEM=true`](https://git-scm.com/docs/git-config#ENVIRONMENT),
Git will not load the system wide config, preventing the dialog from
populating.
Closes#26717
Fixes Issue #29365 and inherit PR #29429
- I should extend the #29429 fork but the fork is not synced, so I
created another PR.
- Use `silenced` class for the link, as in #29847
---------
Co-authored-by: Ben Chang <ben_chang@htc.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The R package repository currently does not have support for older
versions of packages which should be stored in a separate /Archive
router. This PR remedies that by adding a new path router.
I am a member of a group that loves using Gitea and this bug has been
annoying us for a long time. Hope it can be merged in time for Gitea
1.23.0.
Any feedback much appreciated.
Fixes#32782
1. use grid instead of table, completely drop "ui table" from that list
2. move some "commit sign" related styles into a new file by the way (no
change) because I need to figure out where `#repo-files-table` is used.
3. move legacy "branch/tag selector" related code into repo-legacy.ts,
now there are 13 `import $` files left.
Rearrange the clone panel to use less horizontal space.
The following changes have been made to achieve this:
- Moved everything into the dropdown menu
- Moved the HTTPS/SSH Switch to a separate line
- Moved the "Clone in VS Code"-Button up and added a divider
- Named the dropdown button "Code", added appropriate icon
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace #26661, fix#25979
Not perfect, but usable and much better than before. Since it is quite
complex, I am not quite sure whether there would be any regression, if
any, I will fix in first time.
I have tested the related pages many times: issue list, milestone issue
list, project view, user issue list, org issue list.
Resolve#31492
The response time for the Pull Requests API has improved significantly,
dropping from over `2000ms` to about `350ms` on my local machine. It's
about `6` times faster.
A key area for further optimization lies in batch-fetching data for
`apiPullRequest.ChangedFiles, apiPullRequest.Additions, and
apiPullRequest.Deletions`.
Tests `TestAPIViewPulls` does exist and new tests added.
- This PR also fixes some bugs in `GetDiff` functions.
- This PR also fixes data inconsistent in test data. For a pull request,
the head branch's reference should be equal to the reference in
`pull/xxx/head`.
Rewrite a lot of legacy strange code, remove duplicate code, remove
jquery, and make these filters reusable.
Let's forget the old code, new code affects:
* issue list open/close switch
* issue list filter (label, author, assignee)
* milestone list open/close switch
* milestone issue list filter (label, author, assignee)
* project view (label, assignee)
Fix#27466
The problem is that any item in the menu could be hidden, pure CSS won't
work, and dropdown's builtin "hideDividers" doesn't work with our "scope
dividers". The newly introduced "archived" label makes the dividers
regression more.
1. add backend support for filtering "poster" and "assignee"
* due to the limits, there is no frontend support at the moment
2. rewrite TS code without jquery, now there are 14 jQuery files left:
- Fix all typescript errors in `.vue` files
- Fix regression from https://github.com/go-gitea/gitea/pull/32329 where
"Recent Commits" chart would not render.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. make it able to "force reload", then the previous pending request
won't block the new request
2. make it support `::group::`
3. add some TS types (but there are still many variables untyped, this
PR is large enough, the remaining types could be added in the future)
- ~~Remove `eslint-plugin-sonarjs`. I lost faith in it since they moved
it to their monorepo and I can't recall the last time when this plugin
raised a useful error.~~
- Add new rules from `no-jquery`
- ~~Tweak typescript config to prevent temp files in root directory in
certain situations~~ File is just gitignored now.
- Tested all relevant dependencies
Redesign the time tracker side bar, and add "time estimate" support (in "1d 2m" format)
Closes#23112
---------
Co-authored-by: stuzer05 <stuzer05@gmail.com>
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix a regression caused by jQuery removal (`renderPreviewPanelContent`)
And simplify the file editor, it doesn't need to be that complex. And
remove jQuery code.
Fix#32700, regression of recent markup refactoring
And by the way, clarify many legacy problems:
1. Some "RenderXxx" functions do not really "render", they only call "post processors"
2. Merge "RenderEmoji | RenderCodeBlock", they are all for "simple issue title"
Optimize partial layout and styling to achieve uniformity and
consistency.
Some buttons's structure is `<a><span><svg/></span></a>`, while others
buttons's structure is `<a><svg/></a>`. Additionally, some buttons have
icons that are **14** in size, while others have icons that are **16**.
Now, the layout has been unified to structure `<a><svg/></a>`, and the
icon size for all buttons has been standardized to the default size of
**16**.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Usually enterprise/organization users would like to only allow OAuth2
login.
This PR adds a new config option to disable the password-based login
form. It is a simple and clear approach and won't block the future
login-system refactoring works.
Fix a TODO in #24821
Replace #21851Close#7633 , close#13606
Fix#32684, regression of #32596 (side-effect of jQuery removal: jQuery could tolerate non-existing elements)
And fix another regression bug from #30453 (initCompReactionSelector double-init)
- Fixes a translation keystring misuse where the string 'open
milestones' is used in place of 'closed milestones'.
- De-duplicates the use of 'open milesones' and 'closed milestones'
keystrings on the sidebar of an issue, reusing the ones on the issues
filter and action bars.
- Closes#32667
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Move all mail sender related codes into a sub package of
services/mailer. Just move, no code change.
Then we just have dependencies on go-mail package in the new sub
package. We can use other package to replace it because it's
unmaintainable. ref #18664
This fixes a TODO in the code to validate the RedirectURIs when adding
or editing an OAuth application in user settings.
This also includes a refactor of the user settings tests to only create
the DB once per top-level test to avoid reloading fixtures.
Provide a cropping tool on the avatar editing page, allowing users to
select the cropping area themselves. This way, users can decide the
displayed area of the image, rather than us deciding for them.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
There are still some functions under `models` after last big refactor
about `models`. This change will move all team related functions to
service layer with no code change.
## Solves
Currently for rules to re-order them you have to alter the creation
date. so you basicly have to delete and recreate them in the right
order. This is more than just inconvinient ...
## Solution
Add a new col for prioritization
## Demo WebUI Video
https://github.com/user-attachments/assets/92182a31-9705-4ac5-b6e3-9bb74108cbd1
---
*Sponsored by Kithara Software GmbH*
This PR mainly removes some global variables, moves some code and
renames some functions to make code clearer.
This PR also removes a testing-only option ForceHardLineBreak during
refactoring since the behavior is clear now.
1. correct the modal usage on "admin email list" page (then
`web_src/js/features/admin/emails.ts` is removed)
2. use `addDelegatedEventListener` instead of `jQuery().on`
3. more jQuery related changes and remove jQuery from
`web_src/js/features/common-button.ts`
4. improve `confirmModal` to make it support header, and remove
incorrect double-escaping
5. fix more typescript related types
6. fine tune devtest pages and add more tests
This Pull Request addresses a race condition in the updateIframeHeight
function where it is sometimes called when the iframe is not fully
loaded or accessible resulting in an alarming error message for the
user.
To address this we:
1. Add defensive programming within the updateIframeHeight function
2. Delay instantiating the intersection observer until the iframe has
loaded
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR removes (almost) all path tricks, and introduces "renderhelper"
package.
Now we can clearly see the rendering behaviors for comment/file/wiki,
more details are in "renderhelper" tests.
Fix#31411 , fix#18592, fix#25632 and maybe more problems. (ps: fix
#32608 by the way)
As per https://vuejs.org/guide/typescript/overview#overview,
typescript's `tsc` does not support importing `.vue` files from `.ts`
files, so we need to use `vue-tsc` which patches in that support. Added
a convenience alias `make tsc` to run it.
Targeting issue #32271
This modification allows native Kubernetes + AWS (EKS) authentication
with the Minio client, to Amazon S3 using the IRSA role assigned to a
Service account by replacing the hard coded reference to the
`DefaultIAMRoleEndpoint` with an optional configurable endpoint.
Internally, Minio's `credentials.IAM` provider implements a discovery
flow for IAM Endpoints if it is not set.
For backwards compatibility:
- We have added a configuration mechanism for an `IamEndpoint` to retain
the unit test safety in `minio_test.go`.
- We believe existing clients will continue to function the same without
needing to provide a new config property since the internals of Minio
client also often resolve to the `http://169.254.169.254` default
endpoint that was being hard coded before
To test, we were able to build a docker image from source and, observe
it choosing the expected IAM endpoint, and see files uploaded via the
client.
This PR rewrites `GetReviewer` function and move it to service layer.
Reviewers should not be watchers, so that this PR removed all watchers
from reviewers. When the repository is under an organization, the pull
request unit read permission will be checked to resolve the bug of
#32394Fix#32394
Resolve#31609
This PR was initiated following my personal research to find the
lightest possible Single Sign-On solution for self-hosted setups. The
existing solutions often seemed too enterprise-oriented, involving many
moving parts and services, demanding significant resources while
promising planetary-scale capabilities. Others were adequate in
supporting basic OAuth2 flows but lacked proper user management
features, such as a change password UI.
Gitea hits the sweet spot for me, provided it supports more granular
access permissions for resources under users who accept the OAuth2
application.
This PR aims to introduce granularity in handling user resources as
nonintrusively and simply as possible. It allows third parties to inform
users about their intent to not ask for the full access and instead
request a specific, reduced scope. If the provided scopes are **only**
the typical ones for OIDC/OAuth2—`openid`, `profile`, `email`, and
`groups`—everything remains unchanged (currently full access to user's
resources). Additionally, this PR supports processing scopes already
introduced with [personal
tokens](https://docs.gitea.com/development/oauth2-provider#scopes) (e.g.
`read:user`, `write:issue`, `read:group`, `write:repository`...)
Personal tokens define scopes around specific resources: user info,
repositories, issues, packages, organizations, notifications,
miscellaneous, admin, and activitypub, with access delineated by read
and/or write permissions.
The initial case I wanted to address was to have Gitea act as an OAuth2
Identity Provider. To achieve that, with this PR, I would only add
`openid public-only` to provide access token to the third party to
authenticate the Gitea's user but no further access to the API and users
resources.
Another example: if a third party wanted to interact solely with Issues,
it would need to add `read:user` (for authorization) and
`read:issue`/`write:issue` to manage Issues.
My approach is based on my understanding of how scopes can be utilized,
supported by examples like [Sample Use Cases: Scopes and
Claims](https://auth0.com/docs/get-started/apis/scopes/sample-use-cases-scopes-and-claims)
on auth0.com.
I renamed `CheckOAuthAccessToken` to `GetOAuthAccessTokenScopeAndUserID`
so now it returns AccessTokenScope and user's ID. In the case of
additional scopes in `userIDFromToken` the default `all` would be
reduced to whatever was asked via those scopes. The main difference is
the opportunity to reduce the permissions from `all`, as is currently
the case, to what is provided by the additional scopes described above.
Screenshots:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When running e2e tests on flaky networks, gravatar can cause a timeout
and test failures. Turn off, and populate avatars on e2e test suite run
to make them reliable.
We have some actions that leverage the Gitea API that began receiving
401 errors, with a message that the user was not found. These actions
use the `ACTIONS_RUNTIME_TOKEN` env var in the actions job to
authenticate with the Gitea API. The format of this env var in actions
jobs changed with go-gitea/gitea/pull/28885 to be a JWT (with a
corresponding update to `act_runner`) Since it was a JWT, the OAuth
parsing logic attempted to parse it as an OAuth token, and would return
user not found, instead of falling back to look up the running task and
assigning it to the actions user.
Make ACTIONS_RUNTIME_TOKEN in action runners could be used,
attempting to parse Oauth JWTs. The code to parse potential old
`ACTION_RUNTIME_TOKEN` was kept in case someone is running an older
version of act_runner that doesn't support the Actions JWT.
When opening the latest code in **Gitpod** and running `make
lint-backend`, the following error occurs:
```bash
gitpod /workspace/gitea (main) $ make lint-backend
go run github.com/golangci/golangci-lint/cmd/golangci-lint@v1.60.3 run
# internal/profilerecord
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/goarch
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# unicode/utf8
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/coverage/rtcov
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/byteorder
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# cmp
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/itoa
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/race
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/goos
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/unsafeheader
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# unicode
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/godebugs
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/asan
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# math/bits
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/goexperiment
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/msan
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/runtime/atomic
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# sync/atomic
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/runtime/syscall
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# crypto/internal/alias
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# encoding
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# log/internal
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# vendor/golang.org/x/crypto/cryptobyte/asn1
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/golangci/golangci-lint/pkg/exitcodes
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/cpu
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# unicode/utf16
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# container/list
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# crypto/subtle
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/goversion
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# golang.org/x/exp/maps
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/ccojocar/zxcvbn-go/match
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# golang.org/x/exp/constraints
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# golang.org/x/tools/internal/packagesinternal
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/quasilyte/go-ruleguard/dsl/types
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# vendor/golang.org/x/crypto/internal/alias
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/nettrace
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/google/go-cmp/cmp/internal/flags
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/gobwas/glob/util/runes
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# internal/platform
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# crypto/internal/boring/sig
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/quasilyte/gogrep/internal/stdinfo
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/daixiang0/gci/pkg/utils
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/quasilyte/stdinfo
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/Antonboom/testifylint/internal/testify
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# hash/maphash
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# github.com/nunnatsa/ginkgolinter/version
compile: version "go1.23.1" does not match go tool version "go1.22.9"
# google.golang.org/protobuf/internal/flags
compile: version "go1.23.1" does not match go tool version "go1.22.9"
make: *** [Makefile:413: lint-go] Error 1
```
Remove unmaintainable sanitizer rules. No need to add special "class"
regexp rules anymore, use RenderInternal.SafeAttr instead, more details
(and examples) are in the tests
- Move models/GetForks to services/FindForks
- Add doer as a parameter of FindForks to check permissions
- Slight performance optimization for get forks API with batch loading
of repository units
- Add tests for forking repository to organizations
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
By some CI fine tunes (`run tests`), SQLite & MSSQL could complete
in about 12~13 minutes (before > 14), MySQL could complete in 18 minutes
(before: about 23 or even > 30)
Major changes:
1. use tmpfs for MySQL storage
1. run `make test-mysql` instead of `make integration-test-coverage`
because the code coverage is not really used at the moment.
1. refactor testlogger to make it more reliable and be able to report
stuck stacktrace
1. do not requeue failed items when a queue is being flushed (failed
items would keep failing and make flush uncompleted)
1. reduce the file sizes for testing
1. use math ChaCha20 random data instead of crypot/rand (for testing
purpose only)
1. no need to `DeleteRepository` in `TestLinguist`
1. other related refactoring to make code easier to maintain
Since there is a status column in the database, the transaction is
unnecessary when downloading an archive. The transaction is blocking
database operations, especially with SQLite.
Replace #27563
In profiling integration tests, I found a couple places where per-test
overhead could be reduced:
* Avoiding disk IO by synchronizing instead of deleting & copying test
Git repository data. This saves ~100ms per test on my machine
* When flushing queues in `PrintCurrentTest`, invoke `FlushWithContext`
in a parallel.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Many files do not directly depend on jQuery now.
To clarify the usage: use `fomanticQuery` to operate Fomantic
components.
Then developers could focus on removing the remaining jQuery usages by
searching `import $` globally.
21 files now:
```
./components/RepoBranchTagSelector.vue:3:import $ from 'jquery';
./features/admin/common.ts:1:import $ from 'jquery';
./features/admin/emails.ts:1:import $ from 'jquery';
./features/common-button.ts:1:import $ from 'jquery';
./features/comp/ComboMarkdownEditor.ts:3:import $ from 'jquery'; (I am working on it, there will be a new PR)
./features/comp/LabelEdit.ts:1:import $ from 'jquery';
./features/notification.ts:1:import $ from 'jquery';
./features/org-team.ts:1:import $ from 'jquery';
./features/repo-code.ts:1:import $ from 'jquery';
./features/repo-common.ts:1:import $ from 'jquery';
./features/repo-diff.ts:1:import $ from 'jquery';
./features/repo-editor.ts:1:import $ from 'jquery';
./features/repo-issue-content.ts:1:import $ from 'jquery';
./features/repo-issue-list.ts:1:import $ from 'jquery';
./features/repo-issue-sidebar.ts:1:import $ from 'jquery';
./features/repo-issue.ts:1:import $ from 'jquery';
./features/repo-legacy.ts:1:import $ from 'jquery';
./features/repo-new.ts:1:import $ from 'jquery';
./features/repo-projects.ts:1:import $ from 'jquery';
./features/repo-settings.ts:1:import $ from 'jquery';
./features/repo-template.ts:1:import $ from 'jquery';
```
There were too many patches to the Render system, it's really difficult
to make further improvements.
This PR clears the legacy problems and fix TODOs.
1. Rename `RenderContext.Type` to `RenderContext.MarkupType` to clarify
its usage.
2. Use `ContentMode` to replace `meta["mode"]` and `IsWiki`, to clarify
the rendering behaviors.
3. Use "wiki" mode instead of "mode=gfm + wiki=true"
4. Merge `renderByType` and `renderByFile`
5. Add more comments
----
The problem of "mode=document": in many cases it is not set, so many
non-comment places use comment's hard line break incorrectly
Index SQL: `CREATE INDEX u_s_uu ON notification(user_id, status,
updated_unix);`
The naming follows `action.go` in the same dir.
I am unsure which version I should add SQL to the migration folder, so I
have not modified it.
Fix#32390
1. move "internal-lfs" route mock to "common-lfs"
2. fine tune tests
3. fix "realm" strings, according to RFC:
https://datatracker.ietf.org/doc/html/rfc2617:
* realm = "realm" "=" realm-value
* realm-value = quoted-string
4. clarify some names of the middlewares, rename `ignXxx` to `optXxx` to
match `reqXxx`, and rename ambiguous `requireSignIn` to `reqGitSignIn`
currently restricted users can only see the repos of teams in orgs they
are part at.
they also should only see the users that are also part at the same team.
---
*Sponsored by Kithara Software GmbH*
rust allows renaming dependencies such as when depending on multiple
versions of the same package. This is not supported by gitea as
discovered in #31500 . This PR tries to address that.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Gitea instance keeps reporting a lot of errors like "LFS SSH transfer connection denied, pure SSH protocol is disabled". When starting debugging the problem, there are more problems found. Try to address most of them:
* avoid unnecessary server side error logs (change `fail()` to not log them)
* figure out the broken tests/user2/lfs.git (added comments)
* avoid `migratePushMirrors` failure when a repository doesn't exist (ignore them)
* avoid "Authorization" (internal&lfs) header conflicts, remove the tricky "swapAuth" and use "X-Gitea-Internal-Auth"
* make internal token comparing constant time (it wasn't a serous problem because in a real world it's nearly impossible to timing-attack the token, but good to fix and backport)
* avoid duplicate routers (introduce AddOwnerRepoGitLFSRoutes)
* avoid "internal (private)" routes using session/web context (they should use private context)
* fix incorrect "path" usages (use "filepath")
* fix incorrect mocked route point handling (need to check func nil correctly)
* split some tests from "git general tests" to "git misc tests" (to keep "git_general_test.go" simple)
Still no correct result for Git LFS SSH tests. So the code is kept there
(`tests/integration/git_lfs_ssh_test.go`) and a FIXME explains the details.
Refactoring of #32211
this move the PublicOnly() filter calcuation next to the DB querys and
let it be decided by the Doer
---
*Sponsored by Kithara Software GmbH*
Resolve#30350
The action unit of mirrors and templates should be disabled by default.
This PR adds `DEFAULT_MIRROR_REPO_UNITS` and
`DEFAULT_TEMPLATE_REPO_UNITS` options to allow users to specify default
units for mirrors and templates.
Thanks to @lng2020 for the
[idea](https://github.com/go-gitea/gitea/issues/30350#issuecomment-2053942243)
Follow #32460
Now the code could be much clearer than before and easier to maintain. A
lot of legacy code is removed.
Manually tested.
This PR is large enough, that fine tunes could be deferred to the future if
there is no bug found or design problem.
Screenshots:
<details>
</details>
Fix#32453
Major changes:
* revert the `<div class="divider"></div>` in
`templates/repo/issue/branch_selector_field.tmpl` (it was removed by
mistake in ##32444)
* remove incorrect `<div class="inline field">` in
`templates/repo/issue/sidebar/allow_maintainer_edit.tmpl`
* use `gt-ellipsis` to replace the "title" class in the dependency list,
then `.repository .issue-content-right .ui.list .title` could be removed
* remove the "relaxed" from dependency list, then there is no padding,
then `.repository .issue-content-right .ui.list .dependency` could be
removed (`white-space` doesn't have effect either because there is
`gt-ellipsis`)
* remove dead code `.repository .issue-content-right #deadlineForm input
`
The fixed UI should be the same as before.
Resolves#32371.
#31970 should have just showed the commit summary, but
`strings.SplitN()` was misused such that we did not perform any
splitting at all and just used the message. This was not caught in the
unit test made in that PR since the test commit summary was > 50 (which
truncated away the commit description).
This snapshot resolves this and adds another unit test to ensure that we
only show the commit summary.
This PR introduces a new event which is similar as Github's. When a new
commit status submitted, the event will be trigged. That means, now we
can receive all feedback from CI/CD system in webhooks or other notify
systems.
ref:
https://docs.github.com/en/webhooks/webhook-events-and-payloads#statusFix#20749
- [x] Move `CreateRepositoryByExample` to service layer
- [x] Move `AddCollabrator` to service layer
- [x] Add a new parameter for `AddCollabrator` so that changing mode
immediately after that will become unnecessary.
From testing, I found that issue posters and users with repository write
access are able to edit attachment names in a way that circumvents the
instance-level file extension restrictions using the edit attachment
APIs. This snapshot adds checks for these endpoints.
The "primary button" is used at many places, but sometimes they might
conflict (due to button switch, hidden panel, dropdown menu, etc).
Sometimes we could add a special CSS class for the buttons, but
sometimes not (see the comment of QuickSubmit)
This PR introduces `querySingleVisibleElem` to help to get the correct
primary button (the only visible one), and prevent from querying the
wrong buttons.
Fix#32437
---------
Co-authored-by: silverwind <me@silverwind.io>
Use zero instead of 9999-12-31 for deadline
Fix#32291
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
1. clarify the "filepath" could(should) contain "{ref}"
2. remove unclear RepoRefLegacy and RepoRefAny, use RepoRefUnknown to guess
3. by the way, avoid using AppURL
To make the markup package easier to maintain:
1. Split some go files into small files
2. Use a shared util.NopCloser, remove duplicate code
3. Remove unused functions
Only move code, no unnecessary logic change. (There are many problems in
old code, but changing them is not in this PR's scope)
Co-authored-by: Giteabot <teabot@gitea.io>
Follow #32383
This PR cleans up the "Deadline" usages in templates, make them call
`ParseLegacy` first to get a `Time` struct then display by `DateUtils`.
Now it should be pretty clear how "deadline string" works, it makes it
possible to do further refactoring and correcting.
This has two major changes that significantly reduce the amount of work
done for large diffs:
* Kill a running git process when reaching the maximum number of files
in a diff, preventing it from processing the entire diff.
* When loading a diff with the URL param `file-only=true`, skip loading
stats. This speeds up loading both hidden files of a diff and sections
of a diff when clicking the "Show More" button.
A couple of minor things from profiling are also included:
* Reuse existing repo in `PrepareViewPullInfo` if head and base are the
same.
The performance impact is going to depend heavily on the individual diff
and the hardware it runs on, but when testing locally on a diff changing
100k+ lines over hundreds of files, I'm seeing a roughly 75% reduction
in time to load the result of "Show More"
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes https://github.com/go-gitea/gitea/issues/30296
- Adds a DB fixture for actions artifacts
- Adds artifacts test files
- Clears artifacts test files between each run
- Note: I initially initialized the artifacts only for artifacts tests,
but because the files are small it only takes ~8ms, so I changed it to
always run in test setup for simplicity
- Fix some otherwise flaky tests by making them not depend on previous
tests
Fix#28121
I did some tests and found that the `missing signature key` error is
caused by an incorrect `Content-Type` header. Gitea correctly sets the
`Content-Type` header when serving files.
348d1d0f32/routers/api/packages/container/container.go (L712-L717)
However, when `SERVE_DIRECT` is enabled, the `Content-Type` header may
be set to an incorrect value by the storage service. To fix this issue,
we can use query parameters to override response header values.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
<img width="600px"
src="https://github.com/user-attachments/assets/f2ff90f0-f1df-46f9-9680-b8120222c555"
/>
In this PR, I introduced a new parameter to the `URL` method to support
additional parameters.
```
URL(path, name string, reqParams url.Values) (*url.URL, error)
```
---
Most S3-like services support specifying the content type when storing
objects. However, Gitea always use `application/octet-stream`.
Therefore, I believe we also need to improve the `Save` method to
support storing objects with the correct content type.
b7fb20e73e/modules/storage/minio.go (L214-L221)
- Prefer
[window.location.assign](https://developer.mozilla.org/en-US/docs/Web/API/Location/assign)
over assigning to
[window.location](https://developer.mozilla.org/en-US/docs/Web/API/Window/location)
which typescript does not like. This works in all browsers including
PaleMoon.
- Fix all typescript issues in `web_src/js/webcomponents`, no behaviour
changes.
- ~~Workaround bug in `@typescript-eslint/no-unnecessary-type-assertion`
rule.~~
- Omit vendored file from type checks.
- `tsc` error count is reduce by 53 with these changes.
This contains two backwards-compatible changes:
* in the lfs http_client, the number of lfs oids requested per batch is
loaded from lfs_client#BATCH_SIZE and defaulted to the previous value of
20
* in the lfs server/service, the max number of lfs oids allowed in a
batch api request is loaded from server#LFS_MAX_BATCH_SIZE and defaults
to 'nil' which equates to the previous behavior of 'infinite'
This fixes#32306
---------
Signed-off-by: Royce Remer <royceremer@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
before if it was nonglob each load would try to glob it and the check
that is not glob ... now we only do that once and no future loading will
trigger it
---
*Sponsored by Kithara Software GmbH*
Migrated a handful Vue components to the `setup` syntax using
composition api as it has better Typescript support and is becoming the
new default in the Vue ecosystem.
- [x] ActionRunStatus.vue
- [x] ActivityHeatmap.vue
- [x] ContextPopup.vue
- [x] DiffFileList.vue
- [x] DiffFileTree.vue
- [x] DiffFileTreeItem.vue
- [x] PullRequestMergeForm.vue
- [x] RepoActivityTopAuthors.vue
- [x] RepoCodeFrequency.vue
- [x] RepoRecentCommits.vue
- [x] ScopedAccessTokenSelector.vue
Left some larger components untouched for now to not go to crazy in this
single PR:
- [ ] DiffCommitSelector.vue
- [ ] RepoActionView.vue
- [ ] RepoContributors.vue
- [ ] DashboardRepoList.vue
- [ ] RepoBranchTagSelector.vue
This introduces a new flag `BlockAdminMergeOverride` on the branch
protection rules that prevents admins/repo owners from bypassing branch
protection rules and merging without approvals or failing status checks.
Fixes#17131
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
These settings can allow users to only display the repositories explore page.
Thanks to yp05327 and wxiaoguang !
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
close#25833
Currently, the information for "requested_reviewers" is only included in
the webhook event for reviews. I would like to suggest adding this
information to the webhook event for "PullRequest comment" as well, as
they both pertain to the "PullRequest" event.
Also, The reviewer information for the Pull Request is not displayed
when it is approved or rejected.
This is a large and complex PR, so let me explain in detail its changes.
First, I had to create new index mappings for Bleve and ElasticSerach as
the current ones do not support search by filename. This requires Gitea
to recreate the code search indexes (I do not know if this is a breaking
change, but I feel it deserves a heads-up).
I've used [this
approach](https://www.elastic.co/guide/en/elasticsearch/reference/7.17/analysis-pathhierarchy-tokenizer.html)
to model the filename index. It allows us to efficiently search for both
the full path and the name of a file. Bleve, however, does not support
this out-of-box, so I had to code a brand new [token
filter](https://blevesearch.com/docs/Token-Filters/) to generate the
search terms.
I also did an overhaul in the `indexer_test.go` file. It now asserts the
order of the expected results (this is important since matches based on
the name of a file are more relevant than those based on its content).
I've added new test scenarios that deal with searching by filename. They
use a new repo included in the Gitea fixture.
The screenshot below depicts how Gitea shows the search results. It
shows results based on content in the same way as the current version
does. In matches based on the filename, the first seven lines of the
file contents are shown (BTW, this is how GitHub does it).
Resolves#32096
---------
Signed-off-by: Bruno Sofiato <bruno.sofiato@gmail.com>
while testing i found out that testing locally as documented in the
changed README.md for pgsql isn't working because of the minio
dependency. reworked this to by default be still docker, but allow for
for local with only minio in docker and testing on bare metal.
also depending on this: fixed docs for running pgsql test
Closes: #32168 (by changing documentation for pgsql tests)
Closes: #32169 (by changing documentation, Makefile & pgsql.ini.tmpl:
adding {{TEST_MINIO_ENDPOINT}})
sry for the combined pr, but when testing I ran into this issue and
first thought they were related and now finally address the same
problem: not beeing able to run pgsql integration tests as described in
the according README.md
This PR fixes javascript errors when an anonymous user visits the
migration page.
It also makes task view checking more restrictive.
The router moved from `/user/task/{id}/status` to
`/username/reponame/-/migrate/status` because it's a migrate status.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#278Close#24076
## Solutions:
- Use
[google/licenseclassifier](https://github.com/google/licenseclassifier/)
Test result between
[google/licensecheck](https://github.com/google/licensecheck) and
[go-license-detector](https://github.com/go-enry/go-license-detector):
https://github.com/go-gitea/gitea/pull/24872#issuecomment-1560361167
Test result between
[google/licensecheck](https://github.com/google/licensecheck) and
[google/licenseclassifier](https://github.com/google/licenseclassifier/):
https://github.com/go-gitea/gitea/pull/24872#issuecomment-1576092178
- Generate License Convert Name List to avoid import license templates
with same contents
Gitea automatically get latest license data from[
spdx/license-list-data](https://github.com/spdx/license-list-data).
But unfortunately, some license templates have same contents. #20915
[click here to see the
list](https://github.com/go-gitea/gitea/pull/24872#issuecomment-1584141684)
So we will generate a list of these license templates with same contents
and create a new file to save the result when using `make
generate-license`. (Need to decide the save path)
- Save License info into a new table `repo_license`
Can easily support searching repo by license in the future.
## Screen shot
Single License:
Multiple Licenses:
Triggers:
- [x] Push commit to default branch
- [x] Create repo
- [x] Mirror repo
- [x] When Default Branch is changed, licenses should be updated
Todo:
- [x] Save Licenses info in to DB when there's a change to license file
in the commit
- [x] DB Migration
- [x] A nominal test?
- [x] Select which library to
use(https://github.com/go-gitea/gitea/pull/24872#issuecomment-1560361167)
- [x] API Support
- [x] Add repo license table
- ~Select license in settings if there are several licenses(Not
recommended)~
- License board(later, not in this PR)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Since page templates keep changing, some pages that contained forms with
CSRF token no longer have them.
It leads to some calls of `GetCSRF` returning an empty string, which
fails the tests. Like
3269b04d61/tests/integration/attachment_test.go (L62-L63)
The test did try to get the CSRF token and provided it, but it was
empty.
Fix#13489
In the original implementation, only `All` will display your owned and
collaborated repositories. For other filters like `Source`, `Mirrors`
and etc. will only display your owned repositories.
This PR removed the limitations. Now except `collbrations`, other
filters will always display your owned and collaborated repositories.
This PR do some minor improvements for head branch display on pull
request view UI.
- [x] Remove the link if the head branch has been deleted with a
tooltip, so that users will not result in a 404 page
- [x] Display a label if this pull request is an agit based one.
Multiple chunks are uploaded with type "block" without using
"appendBlock" and eventually out of order for bigger uploads.
8MB seems to be the chunk size
This change parses the blockList uploaded after all blocks to get the
final artifact size and order them correctly before calculating the
sha256 checksum over all blocks
Fixes#31354
This PR addresses the missing `bin` field in Composer metadata, which
currently causes vendor-provided binaries to not be symlinked to
`vendor/bin` during installation.
In the current implementation, running `composer install` does not
publish the binaries, leading to issues where expected binaries are not
available.
By properly declaring the `bin` field, this PR ensures that binaries are
correctly symlinked upon installation, as described in the [Composer
documentation](https://getcomposer.org/doc/articles/vendor-binaries.md).
I'm new to go and contributing to gitea, your guidance is much
appreciated.
This is meant to solve https://github.com/go-gitea/gitea/issues/13309
Previously, closed issues would not be shown under new issues in the
activity tab, even if they were newly created.
changes:
* Split out newlyCreatedIssues from issuesForActivityStatement to count
both currently open and closed issues.
* Use a seperate function to count active issues to prevent
double-counting issues after the above change.
Result is that new issues that have been closed are shown both under
"new" and "closed".
Signed-off-by: Timon van der Berg <tmnvanderberg@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/31686.
A more elborate manual tabindex numbering could be done, but I think
it's not really worth the extra effort and such stuff could easily break
during refactors.
Includes another small tweak to un-stretch the`<a>` element so it's only
as large as it needs to be and this change also made the margin
unneeded.
X-Forwarded-Host has many problems: non-standard, not well-defined
(X-Forwarded-Port or not), conflicts with Host header, it already caused
problems like #31907. So do not use X-Forwarded-Host, just use Host
header directly.
Official document also only uses `Host` header and never mentioned
others.
A regression in #31924 caused there to be two `issues.review.comment`
keys in the English language locale file, leading to a problem when
reading PR review histories that contain comments.
This snapshot addresses this by making the newer key unique.
Remove unused CSRF options, decouple "new csrf protector" and "prepare"
logic, do not redirect to home page if CSRF validation falis (it
shouldn't happen in daily usage, if it happens, redirecting to home
doesn't help either but just makes the problem more complex for "fetch")
Fixes#31937
- Add missing comment reply handling
- Use `onGiteaRun` in the test because the fixtures are not present
otherwise (did this behaviour change?)
Compare without whitespaces.
In Projects, columns heights are defined by the sum of all contents
height of the biggest column, rather than a fraction of the viewport
height. It default to 60vh when there is no cards to display.
Fix#31666
A 500 status code was thrown when passing a non-existent target to the
create release API. This snapshot handles this error and instead throws
a 404 status code.
Discovered while working on #31840.
PR for issue #31968
Replaces PR #31983 to comply with gitea's error definition
Failed authentications are now logged to level `Warning` instead of
`Info`.
---
`status == "rename"` should have read `status == "renamed"`. The typo
means that file.PreviousFilename would never be populated, which e.g.
breaks usage of the Github Action at
https://github.com/dorny/paths-filter.
Close#31801. Follow #31761.
Since there are so many benefits of compression and there are no reports
of related issues after weeks, it should be fine to enable compression
by default.
This will allow instance admins to view signup pattern patterns for
public instances. It is modelled after discourse, mastodon, and
MediaWiki's approaches.
Note: This has privacy implications, but as the above-stated open-source
projects take this approach, especially MediaWiki, which I have no doubt
looked into this thoroughly, it is likely okay for us, too. However, I
would be appreciative of any feedback on how this could be improved.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #32001.
To prevent the context cache from being misused for long-term work
(which would result in using invalid cache without awareness), the
context cache is designed to exist for a maximum of 10 seconds. This
leads to many false reports, especially in the case of slow SQL.
This PR increases it to 5 minutes to reduce false reports.
5 minutes is not a very safe value, as a lot of changes may have
occurred within that time frame. However, as far as I know, there has
not been a case of misuse of context cache discovered so far, so I think
5 minutes should be OK.
Please note that after this PR, if warning logs are found again, it
should get attention, at that time it can be almost 100% certain that it
is a misuse.
https://github.com/go-fed/httpsig seems to be unmaintained.
Switch to github.com/42wim/httpsig which has removed deprecated crypto
and default sha256 signing for ssh rsa.
No impact for those that use ed25519 ssh certificates.
This is a breaking change for:
- gitea.com/gitea/tea (go-sdk) - I'll be sending a PR there too
- activitypub using deprecated crypto (is this actually used?)
The normal themes already have a variant which automatically chooses
light/dark mode based on the browser.
This PR adds the same variant, but for the colorblind themes.
Follow #31950 and Fix the display bug of #31966 .
This will only fix the English version. I will update all these
translation files in crowdin after this merged so that all the languages
can be fixed.
And all these files should be backported together.
This PR remove the bold effect around the name when creating a new tag
or branch.
Part of #27700
Removes all URLs from translation strings to easy up changing them in
the future and to exclude people injecting malicious URLs through
translations. First measure as long as #24402 is out of scope.
All refs under `refs/pull` should only be changed from Gitea inside but
not by pushing from outside of Gitea.
This PR will prevent the pull refs update but allow other refs to be
updated on the same pushing with `--mirror` operations.
The main changes are to add checks on `update` hook but not
`pre-receive` because `update` will be invoked by every ref but
`pre-receive` will revert all changes once one ref update fails.
Fix#31916
In #30876, `sortOrder` has been changed into a map, but it is only
implemented in explore.
~~But it seems that size sort order has no effect from long long ago,~~
not directly caused by the PR above.
I think it is still caused by #29231.
In #29231, it merged the sort orders from
`templates/explore/repo_search.tmpl` and
`templates/admin/repo/search.tmpl`.
In `templates/admin/repo/search.tmpl`, it contains size sort orders, but
not in `templates/explore/repo_search.tmpl`, which is used in non-admin
pages.
So `order by size` is added from #29231, but the handler was not added.
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- When pasting a URL over another URL, replace the URL instead of
creating a useless `[url](url)`. This is the 1-line change
[here](https://github.com/go-gitea/gitea/pull/31948/files#diff-be8e94d7e3da33b187381f53d28095107bd0cf29ae9a9e997e4f422f4a54479cR122).
- Always run `initTextareaEvents`, previously it was not run when
`dropzoneEl` was not present like when attachements are disabled on the
server. Refactored the function to gracefully handle absent `dropzoneEl`
and rename the function to a better name.
Follow #31908. The main refactor is that it has removed the returned
context of `Lock`.
The returned context of `Lock` in old code is to provide a way to let
callers know that they have lost the lock. But in most cases, callers
shouldn't cancel what they are doing even it has lost the lock. And the
design would confuse developers and make them use it incorrectly.
See the discussion history:
https://github.com/go-gitea/gitea/pull/31813#discussion_r1732041513 and
https://github.com/go-gitea/gitea/pull/31813#discussion_r1734078998
It's a breaking change, but since the new module hasn't been used yet, I
think it's OK to not add the `pr/breaking` label.
## Design principles
It's almost copied from #31908, but with some changes.
### Use spinlock even in memory implementation (unchanged)
In actual use cases, users may cancel requests. `sync.Mutex` will block
the goroutine until the lock is acquired even if the request is
canceled. And the spinlock is more suitable for this scenario since it's
possible to give up the lock acquisition.
Although the spinlock consumes more CPU resources, I think it's
acceptable in most cases.
### Do not expose the mutex to callers (unchanged)
If we expose the mutex to callers, it's possible for callers to reuse
the mutex, which causes more complexity.
For example:
```go
lock := GetLocker(key)
lock.Lock()
// ...
// even if the lock is unlocked, we cannot GC the lock,
// since the caller may still use it again.
lock.Unlock()
lock.Lock()
// ...
lock.Unlock()
// callers have to GC the lock manually.
RemoveLocker(key)
```
That's why
https://github.com/go-gitea/gitea/pull/31813#discussion_r1721200549
In this PR, we only expose `ReleaseFunc` to callers. So callers just
need to call `ReleaseFunc` to release the lock, and do not need to care
about the lock's lifecycle.
```go
release, err := locker.Lock(ctx, key)
if err != nil {
return err
}
// ...
release()
// if callers want to lock again, they have to re-acquire the lock.
release, err := locker.Lock(ctx, key)
// ...
```
In this way, it's also much easier for redis implementation to extend
the mutex automatically, so that callers do not need to care about the
lock's lifecycle. See also
https://github.com/go-gitea/gitea/pull/31813#discussion_r1722659743
### Use "release" instead of "unlock" (unchanged)
For "unlock", it has the meaning of "unlock an acquired lock". So it's
not acceptable to call "unlock" when failed to acquire the lock, or call
"unlock" multiple times. It causes more complexity for callers to decide
whether to call "unlock" or not.
So we use "release" instead of "unlock" to make it clear. Whether the
lock is acquired or not, callers can always call "release", and it's
also safe to call "release" multiple times.
But the code DO NOT expect callers to not call "release" after acquiring
the lock. If callers forget to call "release", it will cause resource
leak. That's why it's always safe to call "release" without extra
checks: to avoid callers to forget to call it.
### Acquired locks could be lost, but the callers shouldn't stop
Unlike `sync.Mutex` which will be locked forever once acquired until
calling `Unlock`, for distributed lock, the acquired lock could be lost.
For example, the caller has acquired the lock, and it holds the lock for
a long time since auto-extending is working for redis. However, it lost
the connection to the redis server, and it's impossible to extend the
lock anymore.
In #31908, it will cancel the context to make the operation stop, but
it's not safe. Many operations are not revert-able. If they have been
interrupted, then the instance goes corrupted. So `Lock` won't return
`ctx` anymore in this PR.
### Multiple ways to use the lock
1. Regular way
```go
release, err := Lock(ctx, key)
if err != nil {
return err
}
defer release()
// ...
```
2. Early release
```go
release, err := Lock(ctx, key)
if err != nil {
return err
}
defer release()
// ...
// release the lock earlier
release()
// continue to do something else
// ...
```
3. Functional way
```go
if err := LockAndDo(ctx, key, func(ctx context.Context) error {
// ...
return nil
}); err != nil {
return err
}
```
like user profile, add a new overviw tab to show profile READEME when it
is exist.
replace #31349 (another solution option)
example view:
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
To help #31813, but do not replace it, since this PR just introduces the
new module but misses some work:
- New option in settings. `#31813` has done it.
- Use the locks in business logic. `#31813` has done it.
So I think the most efficient way is to merge this PR first (if it's
acceptable) and then finish #31813.
## Design principles
### Use spinlock even in memory implementation
In actual use cases, users may cancel requests. `sync.Mutex` will block
the goroutine until the lock is acquired even if the request is
canceled. And the spinlock is more suitable for this scenario since it's
possible to give up the lock acquisition.
Although the spinlock consumes more CPU resources, I think it's
acceptable in most cases.
### Do not expose the mutex to callers
If we expose the mutex to callers, it's possible for callers to reuse
the mutex, which causes more complexity.
For example:
```go
lock := GetLocker(key)
lock.Lock()
// ...
// even if the lock is unlocked, we cannot GC the lock,
// since the caller may still use it again.
lock.Unlock()
lock.Lock()
// ...
lock.Unlock()
// callers have to GC the lock manually.
RemoveLocker(key)
```
That's why
https://github.com/go-gitea/gitea/pull/31813#discussion_r1721200549
In this PR, we only expose `ReleaseFunc` to callers. So callers just
need to call `ReleaseFunc` to release the lock, and do not need to care
about the lock's lifecycle.
```go
_, release, err := locker.Lock(ctx, key)
if err != nil {
return err
}
// ...
release()
// if callers want to lock again, they have to re-acquire the lock.
_, release, err := locker.Lock(ctx, key)
// ...
```
In this way, it's also much easier for redis implementation to extend
the mutex automatically, so that callers do not need to care about the
lock's lifecycle. See also
https://github.com/go-gitea/gitea/pull/31813#discussion_r1722659743
### Use "release" instead of "unlock"
For "unlock", it has the meaning of "unlock an acquired lock". So it's
not acceptable to call "unlock" when failed to acquire the lock, or call
"unlock" multiple times. It causes more complexity for callers to decide
whether to call "unlock" or not.
So we use "release" instead of "unlock" to make it clear. Whether the
lock is acquired or not, callers can always call "release", and it's
also safe to call "release" multiple times.
But the code DO NOT expect callers to not call "release" after acquiring
the lock. If callers forget to call "release", it will cause resource
leak. That's why it's always safe to call "release" without extra
checks: to avoid callers to forget to call it.
### Acquired locks could be lost
Unlike `sync.Mutex` which will be locked forever once acquired until
calling `Unlock`, in the new module, the acquired lock could be lost.
For example, the caller has acquired the lock, and it holds the lock for
a long time since auto-extending is working for redis. However, it lost
the connection to the redis server, and it's impossible to extend the
lock anymore.
If the caller don't stop what it's doing, another instance which can
connect to the redis server could acquire the lock, and do the same
thing, which could cause data inconsistency.
So the caller should know what happened, the solution is to return a new
context which will be canceled if the lock is lost or released:
```go
ctx, release, err := locker.Lock(ctx, key)
if err != nil {
return err
}
defer release()
// ...
DoSomething(ctx)
// the lock is lost now, then ctx has been canceled.
// Failed, since ctx has been canceled.
DoSomethingElse(ctx)
```
### Multiple ways to use the lock
1. Regular way
```go
ctx, release, err := Lock(ctx, key)
if err != nil {
return err
}
defer release()
// ...
```
2. Early release
```go
ctx, release, err := Lock(ctx, key)
if err != nil {
return err
}
defer release()
// ...
// release the lock earlier and reset the context back
ctx = release()
// continue to do something else
// ...
```
3. Functional way
```go
if err := LockAndDo(ctx, key, func(ctx context.Context) error {
// ...
return nil
}); err != nil {
return err
}
```
Update mermaid to
[v11](https://github.com/mermaid-js/mermaid/releases/tag/v11.0.0) and
enable the new [`suppressErrorRendering`
option](https://github.com/mermaid-js/mermaid/pull/4359) to ensure
mermaid never renders error elements into the DOM (we have per-chart
error rendering, so don't need it). Tested various chart types.
BTW, I was unable to reproduce that error rendering from mermaid with
`suppressErrorRendering: false` and I thought we had some CSS to hide
the error element, but I could not find it, not even in git history.
This Pull Request adds missing tool tips for the protected, copy, and rss icons on the branch list page. It also moved protected icon position after the branch name.
When opening a repository, it will call `ensureValidRepository` and also
`CatFileBatch`. But sometimes these will not be used until repository
closed. So it's a waste of CPU to invoke 3 times git command for every
open repository.
This PR removed all of these from `OpenRepository` but only kept
checking whether the folder exists. When a batch is necessary, the
necessary functions will be invoked.
In the OpenID flows, the "CfTurnstileSitekey" wasn't populated, which
caused those flows to fail if using Turnstile as the Captcha
implementation.
This adds the missing context variables, allowing Turnstile to be used
in the OpenID flows.
Fix#10036
This PR adds some labels for tags of this commit after the commit
message on the commits table. The tag template is share as commit
graph's.
Desktop:
<img width="1302" alt="image"
src="ba94e1e6-2a3d-44f3-85a3-575fb5667c97">
Mobile:
<img width="370" alt="image"
src="e3eb1f44-3686-4012-aa9d-52cd88b22c0e">
fix#23668
My plan:
* In the `actions.list` method, if workflow is selected and IsAdmin,
check whether the on event contains `workflow_dispatch`. If so, display
a `Run workflow` button to allow the user to manually trigger the run.
* Providing a form that allows users to select target brach or tag, and
these parameters can be configured in yaml
* Simple form validation, `required` input cannot be empty
* Add a route `/actions/run`, and an `actions.Run` method to handle
* Add `WorkflowDispatchPayload` struct to pass the Webhook event payload
to the runner when triggered, this payload carries the `inputs` values
and other fields, doc: [workflow_dispatch
payload](https://docs.github.com/en/webhooks/webhook-events-and-payloads#workflow_dispatch)
Other PRs
* the `Workflow.WorkflowDispatchConfig()` method still return non-nil
when workflow_dispatch is not defined. I submitted a PR
https://gitea.com/gitea/act/pulls/85 to fix it. Still waiting for them
to process.
Behavior should be same with github, but may cause confusion. Here's a
quick reminder.
*
[Doc](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#workflow_dispatch)
Said: This event will `only` trigger a workflow run if the workflow file
is `on the default branch`.
* If the workflow yaml file only exists in a non-default branch, it
cannot be triggered. (It will not even show up in the workflow list)
* If the same workflow yaml file exists in each branch at the same time,
the version of the default branch is used. Even if `Use workflow from`
selects another branch
```yaml
name: Docker Image CI
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
environment:
description: 'Environment to run tests against'
type: environment
required: true
default: 'environment values'
number_required_1:
description: 'number '
type: number
required: true
default: '100'
number_required_2:
description: 'number'
type: number
required: true
default: '100'
number_required_3:
description: 'number'
type: number
required: true
default: '100'
number_1:
description: 'number'
type: number
required: false
number_2:
description: 'number'
type: number
required: false
number_3:
description: 'number'
type: number
required: false
env:
inputs_logLevel: ${{ inputs.logLevel }}
inputs_tags: ${{ inputs.tags }}
inputs_boolean_default_true: ${{ inputs.boolean_default_true }}
inputs_boolean_default_false: ${{ inputs.boolean_default_false }}
inputs_environment: ${{ inputs.environment }}
inputs_number_1: ${{ inputs.number_1 }}
inputs_number_2: ${{ inputs.number_2 }}
inputs_number_3: ${{ inputs.number_3 }}
inputs_number_required_1: ${{ inputs.number_required_1 }}
inputs_number_required_2: ${{ inputs.number_required_2 }}
inputs_number_required_3: ${{ inputs.number_required_3 }}
jobs:
build:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- run: ls -la
- run: env | grep inputs
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.boolean_default_false }}
```
---------
Co-authored-by: TKaxv_7S <954067342@qq.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When a long line with characters such as dots is returned by a step in
an action (e.g. by the output of the Ruby on Rails test runner), it
overflows the log container, causing the page to scroll sideways.
This PR adds the CSS `overflow-wrap: anywhere;` to the
`.job-step-section .job-step-logs .job-log-line .log-msg` selector,
which causes such lines to wrap as well
Fix#31625.
If `pull_service.NewPullRequest` return an error which misses each `if`
check, `CompareAndPullRequestPost` will return immediately, since it
doesn't write the HTTP response, a 200 response with empty body will be
sent to clients.
```go
if err := pull_service.NewPullRequest(ctx, repo, pullIssue, labelIDs, attachments, pullRequest, assigneeIDs); err != nil {
if repo_model.IsErrUserDoesNotHaveAccessToRepo(err) {
ctx.Error(http.StatusBadRequest, "UserDoesNotHaveAccessToRepo", err.Error())
} else if git.IsErrPushRejected(err) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, user_model.ErrBlockedUser) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, issues_model.ErrMustCollaborator) {
// ...
ctx.JSONError(flashError)
}
return
}
```
Not sure what kind of error can cause it to happen, so this PR just
expose it. And we can fix it when users report that creating PRs failed
with error responses.
It's all my guess since I cannot reproduce the problem, but even if it's
not related, the code here needs to be improved.
Fix#31395
This regression is introduced by #30273. To find out how GitHub handles
this case, I did [some
tests](https://github.com/go-gitea/gitea/issues/31395#issuecomment-2278929115).
I use redirect in this PR instead of checking if the corresponding `.md`
file exists when rendering the link because GitHub also uses redirect.
With this PR, there is no need to resolve the raw wiki link when
rendering a wiki page. If a wiki link points to a raw file, access will
be redirected to the raw link.
Fix#31807
ps: the newly added params's value will be changed.
When the first time you selected the filter, the values of params will
be `0` or `1`
But in pager it will be `true` or `false`.
So do we have `boolToInt` function?
Fix#31730
This PR rewrote the function `PublicKeysAreExternallyManaged` with a
simple test. The new function removed the loop to make it more readable.
We had an issue where a repo was using LFS to store a file, but the user
did not push the file. When trying to view the file, Gitea returned a
500 HTTP status code referencing `ErrLFSObjectNotExist`. It appears the
intent was the render this file as plain text, but the conditional was
flipped. I've also added a test to verify that the file is rendered as
plain text.
When transferring repositories that have issues linked to a project
board to another organization, the issues remain associated with the
original project board. This causes the columns in the project board to
become bugged, making it difficult to move other issues in or out of the
affected columns. As a solution, I removed the issue relations since the
other organization does not have this project table.
Fix for #31538
Co-authored-by: Jason Song <i@wolfogre.com>
As discussed in #31667 & #26561, when a card on a Project contains
images, they can overflow the card on its containing column. This aims
to fix this issue via snapping scrollbars.
---
Issue #31667 is open to discussion as there should be room for
improvement.
Moved repository visibility to the danger zone in the settings area. To
change the visibility, it is necessary to go to the danger zone, click
on the private/public button, and accept the change in the modal.
Resolves: #23826
---
## Screenshots
<details>
<summary>Before</summary>
Private repo:
Public repo:
</details>
<details>
<summary>After</summary>
Make private:
Make private modal
Make public:
Make public modal
</details>
---------
Co-authored-by: Kemal Zebari <60799661+kemzeb@users.noreply.github.com>
Adds types to various low-level modules. All changes are type-only, no
runtime changes. `tsc` now reports 38 less errors.
One problem was that `@types/sortablejs` does not accept promise return
in its functions which triggered the linter, so I disabled the rules on
those line.
Fix#31271.
When gogit is enabled, `IsObjectExist` calls
`repo.gogitRepo.ResolveRevision`, which is not correct. It's for
checking references not objects, it could work with commit hash since
it's both a valid reference and a commit object, but it doesn't work
with blob objects.
So it causes #31271 because it reports that all blob objects do not
exist.
Support compression for Actions logs to save storage space and
bandwidth. Inspired by
https://github.com/go-gitea/gitea/issues/24256#issuecomment-1521153015
The biggest challenge is that the compression format should support
[seekable](https://github.com/facebook/zstd/blob/dev/contrib/seekable_format/zstd_seekable_compression_format.md).
So when users are viewing a part of the log lines, Gitea doesn't need to
download the whole compressed file and decompress it.
That means gzip cannot help here. And I did research, there aren't too
many choices, like bgzip and xz, but I think zstd is the most popular
one. It has an implementation in Golang with
[zstd](https://github.com/klauspost/compress/tree/master/zstd) and
[zstd-seekable-format-go](https://github.com/SaveTheRbtz/zstd-seekable-format-go),
and what is better is that it has good compatibility: a seekable format
zstd file can be read by a regular zstd reader.
This PR introduces a new package `zstd` to combine and wrap the two
packages, to provide a unified and easy-to-use API.
And a new setting `LOG_COMPRESSION` is added to the config, although I
don't see any reason why not to use compression, I think's it's a good
idea to keep the default with `none` to be consistent with old versions.
`LOG_COMPRESSION` takes effect for only new log files, it adds `.zst` as
an extension to the file name, so Gitea can determine if it needs
decompression according to the file name when reading. Old files will
keep the format since it's not worth converting them, as they will be
cleared after #31735.
<img width="541" alt="image"
src="https://github.com/user-attachments/assets/e9598764-a4e0-4b68-8c2b-f769265183c9">
Fix#27278
Replace #27816
This PR adds a meta-comment for an issue when dragging an issue from one
column to another of a project.
<img width="600" alt="image"
src="5fc1d954-430e-4db0-aaee-a00006fa91f5">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: yp05327 <576951401@qq.com>
Found at
https://github.com/go-gitea/gitea/pull/31790#issuecomment-2272898915
`unit-tests-gogit` never work since the workflow set `TAGS` with
`gogit`, but the Makefile use `TEST_TAGS`.
This PR adds the values of `TAGS` to `TEST_TAGS`, ensuring that setting
`TAGS` is always acceptable and avoiding confusion about which one
should be set.
Fix#31738
When pushing a new branch, the old commit is zero. Most git commands
cannot recognize the zero commit id. To get the changed files in the
push, we need to get the first diverge commit of this branch. In most
situations, we could check commits one by one until one commit is
contained by another branch. Then we will think that commit is the
diverge point.
And in a pre-receive hook, this will be more difficult because all
commits haven't been merged and they actually stored in a temporary
place by git. So we need to bring some envs to let git know the commit
exist.
close #27031
If the rpm package does not contain a matching gpg signature, the
installation will fail. See (#27031) , now auto-signing rpm uploads.
This option is turned off by default for compatibility.
If the assign the pull request review to a team, it did not show the
members of the team in the "requested_reviewers" field, so the field was
null. As a solution, I added the team members to the array.
fix#31764
Fix#31657.
According to the
[doc](https://docs.github.com/en/actions/writing-workflows/workflow-syntax-for-github-actions#onschedule)
of GitHub Actions, The timezone for cron should be UTC, not the local
timezone. And Gitea Actions doesn't have any reasons to change this, so
I think it's a bug.
However, Gitea Actions has extended the syntax, as it supports
descriptors like `@weekly` and `@every 5m`, and supports specifying the
timezone like `TZ=UTC 0 10 * * *`. So we can make it use UTC only when
the timezone is not specified, to be compatible with GitHub Actions, and
also respect the user's specified.
It does break the feature because the times to run tasks would be
changed, and it may confuse users. So I don't think we should backport
this.
## ⚠️ BREAKING ⚠️
If the server's local time zone is not UTC, a scheduled task would run
at a different time after upgrading Gitea to this version.
Fix#31707.
Also related to #31715.
Some Actions resources could has different types of ownership. It could
be:
- global: all repos and orgs/users can use it.
- org/user level: only the org/user can use it.
- repo level: only the repo can use it.
There are two ways to distinguish org/user level from repo level:
1. `{owner_id: 1, repo_id: 2}` for repo level, and `{owner_id: 1,
repo_id: 0}` for org level.
2. `{owner_id: 0, repo_id: 2}` for repo level, and `{owner_id: 1,
repo_id: 0}` for org level.
The first way seems more reasonable, but it may not be true. The point
is that although a resource, like a runner, belongs to a repo (it can be
used by the repo), the runner doesn't belong to the repo's org (other
repos in the same org cannot use the runner). So, the second method
makes more sense.
And the first way is not user-friendly to query, we must set the repo id
to zero to avoid wrong results.
So, #31715 should be right. And the most simple way to fix#31707 is
just:
```diff
- shared.GetRegistrationToken(ctx, ctx.Repo.Repository.OwnerID, ctx.Repo.Repository.ID)
+ shared.GetRegistrationToken(ctx, 0, ctx.Repo.Repository.ID)
```
However, it is quite intuitive to set both owner id and repo id since
the repo belongs to the owner. So I prefer to be compatible with it. If
we get both owner id and repo id not zero when creating or finding, it's
very clear that the caller want one with repo level, but set owner id
accidentally. So it's OK to accept it but fix the owner id to zero.
Fix#31137.
Replace #31623#31697.
When migrating LFS objects, if there's any object that failed (like some
objects are losted, which is not really critical), Gitea will stop
migrating LFS immediately but treat the migration as successful.
This PR checks the error according to the [LFS api
doc](https://github.com/git-lfs/git-lfs/blob/main/docs/api/batch.md#successful-responses).
> LFS object error codes should match HTTP status codes where possible:
>
> - 404 - The object does not exist on the server.
> - 409 - The specified hash algorithm disagrees with the server's
acceptable options.
> - 410 - The object was removed by the owner.
> - 422 - Validation error.
If the error is `404`, it's safe to ignore it and continue migration.
Otherwise, stop the migration and mark it as failed to ensure data
integrity of LFS objects.
And maybe we should also ignore others errors (maybe `410`? I'm not sure
what's the difference between "does not exist" and "removed by the
owner".), we can add it later when some users report that they have
failed to migrate LFS because of an error which should be ignored.
There's already `initActionsTasks`; it will avoid additional check for
if Actions enabled to move `registerActionsCleanup` into it.
And we don't really need `OlderThanConfig`.
- Change condition to include `RepoID` equal to 0 for organization
secrets
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#26685
If a commit status comes from Gitea Actions and the user cannot access
the repo's actions unit (the user does not have the permission or the
actions unit is disabled), a 404 page will occur after clicking the
"Details" link. We should hide the "Details" link in this case.
<img
src="68361714-b784-4bb5-baab-efde4221f466"
width="400px" />
Document return type for the endpoints that fetch specific files from a
repository. This allows the swagger generated code to read the returned
data.
Co-authored-by: Giteabot <teabot@gitea.io>
We don't need to have polyfills down to Node v4. Some of our deps have
polyfills, and don't utilize the built-in implementation if available.
While this does decrease our package graph, I haven't been able to
notice any decrease/increase in page load times, although that could
likely be just because it's already pretty fast.
Nolyfill is https://github.com/SukkaW/nolyfill
updates to files generated with:
```shell
npx nolyfill install
npm update
```
Before this is/isn't merged, I'd be appreciative/thankful for other's
insights.
Edit: This isn't due to a specific individual. I am generally supportive
of them and their dedication to backward compatibility. This PR is due
to not needing those imports for our minimum requirements. Please don't
take this PR as commentary on anyone's character.
---------
Co-authored-by: silverwind <me@silverwind.io>
See discussion on #31561 for some background.
The introspect endpoint was using the OIDC token itself for
authentication. This fixes it to use basic authentication with the
client ID and secret instead:
* Applications with a valid client ID and secret should be able to
successfully introspect an invalid token, receiving a 200 response
with JSON data that indicates the token is invalid
* Requests with an invalid client ID and secret should not be able
to introspect, even if the token itself is valid
Unlike #31561 (which just future-proofed the current behavior against
future changes to `DISABLE_QUERY_AUTH_TOKEN`), this is a potential
compatibility break (some introspection requests without valid client
IDs that would previously succeed will now fail). Affected deployments
must begin sending a valid HTTP basic authentication header with their
introspection requests, with the username set to a valid client ID and
the password set to the corresponding client secret.
Fix#31599
A branch divergence is counted based on the default branch. If the
default branch is updated, all divergence caches of the repo need to be
deleted.
When you are entering a number in the issue search, you likely want the
issue with the given ID (code internal concept: issue index).
As such, when a number is detected, the issue with the corresponding ID
will now be added to the results.
Fixes#4479
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
### Notes on updating permissions
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
#26996
Added default sorting for milestones by name.
Additional, name for sorting closestduedate and furthestduedate was
broken, so I fixed it.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Make it posible to let mails show e.g.:
`Max Musternam (via gitea.kithara.com) <gitea@kithara.com>`
Docs: https://gitea.com/gitea/docs/pulls/23
---
*Sponsored by Kithara Software GmbH*
Issue template dropdown can have many entries, and it could be better to
have them rendered as list later on if multi-select is enabled.
so this adds an option to the issue template engine to do so.
DOCS: https://gitea.com/gitea/docs/pulls/19
---
## demo:
```yaml
name: Name
title: Title
about: About
labels: ["label1", "label2"]
ref: Ref
body:
- type: dropdown
id: id6
attributes:
label: Label of dropdown (list)
description: Description of dropdown
multiple: true
list: true
options:
- Option 1 of dropdown
- Option 2 of dropdown
- Option 3 of dropdown
- Option 4 of dropdown
- Option 5 of dropdown
- Option 6 of dropdown
- Option 7 of dropdown
- Option 8 of dropdown
- Option 9 of dropdown
```
---
*Sponsored by Kithara Software GmbH*
I changed the title of the registation email from "Welcome to Gitea" to
"Welcome to (appname)". I did this by substituting 'Gitea' in
register_notify to %s and formating the registration title in mail.go. I
changed this for all the languages I could, but I struggled to changed
the translation file for Farsi. I have attached the screenshots of
before and after and the related issue below.
Related issue:
https://github.com/go-gitea/gitea/issues/31108
Before change:
After:
---------
Signed-off-by: Sunny Wan <Sunnywan2020@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
We have some instances that only allow using an external authentication
source for authentication. In this case, users changing their email,
password, or linked OpenID connections will not have any effect, and
we'd like to prevent showing that to them to prevent confusion.
Included in this are several changes to support this:
* A new setting to disable user managed authentication credentials
(email, password & OpenID connections)
* A new setting to disable user managed MFA (2FA codes & WebAuthn)
* Fix an issue where some templates had separate logic for determining
if a feature was disabled since it didn't check the globally disabled
features
* Hide more user setting pages in the navbar when their settings aren't
enabled
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
The build currently seems to work fine without this, but in theory it
should fail because Fomantic is JavaScript. I feel more comfortable
having this loader declared.
Note: I did try using the [combined loader
config](https://github.com/privatenumber/esbuild-loader#-quick-setup)
but when I did that, vue files could not load, so I think this is the
best option.
Before we had just the plain mail address as recipient. But now we
provide additional Information for the Mail clients.
---
*Sponsored by Kithara Software GmbH*
None of the frontend js/ts files was touched besides these two commands
(edit: no longer true, I touched one file in
61105d0618
because of a deprecation that was not showing before the rename).
`tsc` currently reports 778 errors, so I have disabled it in CI as
planned.
Everything appears to work fine.
Fixes#22722
### Problem
Currently, it is not possible to force push to a branch with branch
protection rules in place. There are often times where this is necessary
(CI workflows/administrative tasks etc).
The current workaround is to rename/remove the branch protection,
perform the force push, and then reinstate the protections.
### Solution
Provide an additional section in the branch protection rules to allow
users to specify which users with push access can also force push to the
branch. The default value of the rule will be set to `Disabled`, and the
UI is intuitive and very similar to the `Push` section.
It is worth noting in this implementation that allowing force push does
not override regular push access, and both will need to be enabled for a
user to force push.
This applies to manual force push to a remote, and also in Gitea UI
updating a PR by rebase (which requires force push)
This modifies the `BranchProtection` API structs to add:
- `enable_force_push bool`
- `enable_force_push_whitelist bool`
- `force_push_whitelist_usernames string[]`
- `force_push_whitelist_teams string[]`
- `force_push_whitelist_deploy_keys bool`
### Updated Branch Protection UI:
<img width="943" alt="image"
src="7491899c-d816-45d5-be84-8512abd156bf">
### Pull Request `Update branch by Rebase` option enabled with source
branch `test` being a protected branch:
<img width="1038" alt="image"
src="57ead13e-9006-459f-b83c-7079e6f4c654">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
As requested in
https://github.com/go-gitea/gitea/pull/31504#issuecomment-2196196646.
This PR refactor the login page:
# Changes
- [x] use separate box for passkey login and go to registration
- [x] move forgot passoword next to password label
- [x] fix password required label `*` and padding
- [x] remove tabs from login page
---------
Co-authored-by: silverwind <me@silverwind.io>
Running git update-index for every individual file is slow, so add and
remove everything with a single git command.
When such a big commit lands in the default branch, it could cause PR
creation and patch checking for all open PRs to be slow, or time out
entirely. For example, a commit that removes 1383 files was measured to
take more than 60 seconds and timed out. With this change checking took
about a second.
This is related to #27967, though this will not help with commits that
change many lines in few files.
1. Add some general guidelines how to write our typescript code
2. Add `@typescript-eslint/eslint-plugin`, general typescript rules
3. Add `eslint-plugin-deprecation` to detect deprecated code
4. Fix all new lint issues that came up
close#31481
currently `$$A + B$$ test` will ignore text after $$ block
test text
before fix
after fix
github display
closes#22015
After adding a passkey, you can now simply login with it directly by
clicking `Sign in with a passkey`.
Note for testing. You need to run gitea using `https` to get the full
passkeys experience.
---------
Co-authored-by: silverwind <me@silverwind.io>
Many avatars were rendered in HTML with certain width/height but then
resized again in CSS. This was pointless so I removed all these cases
and made the HTML size match the previous render size.
Also did a few CSS cleanups in the tribute rendering:
<img width="648" alt="image"
src="cb2fafb3-5e20-46e9-814f-07df20038beb">
This enables eslint to use the typescript parser and resolver which
brings some benefits that eslint rules now have type information
available and a tsconfig.json is required for the upcoming typescript
migration as well. Notable changes done:
- Add typescript parser and resolver
- Move the vue-specific config into the root file
- Enable `vue-scoped-css/enforce-style-type` rule, there was only one
violation and I added a inline disable there.
- Fix new lint errors that were detected because of the parser change
- Update `i/no-unresolved` to remove now-unnecessary workaround for the
resolver
- Disable `i/no-named-as-default` as it seems to raise bogus issues in
the webpack config
- Change vitest config to typescript
- Change playwright config to typescript
- Add `eslint-plugin-playwright` and fix issues
- Add `tsc` linting to `make lint-js`
Support legacy _links LFS batch response.
Fixes#31512.
This is backwards-compatible change to the LFS client so that, upon
mirroring from an upstream which has a batch api, it can download
objects whether the responses contain the `_links` field or its
successor the `actions` field. When Gitea must fallback to the legacy
`_links` field a logline is emitted at INFO level which looks like this:
```
...s/lfs/http_client.go:188:performOperation() [I] <LFSPointer ee95d0a27ccdfc7c12516d4f80dcf144a5eaf10d0461d282a7206390635cdbee:160> is using a deprecated batch schema response!
```
I've only run `test-backend` with this code, but added a new test to
cover this case. Additionally I have a fork with this change deployed
which I've confirmed syncs LFS from Gitea<-Artifactory (which has legacy
`_links`) as well as from Gitea<-Gitea (which has the modern `actions`).
Signed-off-by: Royce Remer <royceremer@gmail.com>
Not sure if this is a regression from
https://github.com/go-gitea/gitea/pull/30513, but when attachments are
disabled, `this.dropzone` is null and the code had failed in
`initEasyMDEPaste` trying to access `dropzoneEl.dropzone`.
Close#31502
Related to #31419.
In this PR, the avatar width is set to 3em, but the height is not set,
so the image is not squared.
When object-fit is set to contain, it can't maintain the radius of the
image.
Result:
make preventDuplicates default to true, users get a clear UI feedback
and know that "a new message appears".
Fixes: https://github.com/go-gitea/gitea/issues/26651
---------
Co-authored-by: silverwind <me@silverwind.io>
* Use dropzone to handle file uploading for all cases, including pasting
and dragging
* Merge duplicate code, use consistent behavior for link generating
Close#20130
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR enhances the labels handling in issue_search by optimizing the
SQL query and de-duplicate the IDs when generating the query string.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Uses the correct string for searching - this is what it looks like prior
to the change:
(observe how the top box has "Search teams" even though collaborator
would be user
The overflow menu button was incorrectly included in the measurement of
the width of the items. As a result, it could get stuck in a loop
alternating between different measurements as the button appears and
disappears.
Given an empty issue/PR comment, the comment history would not be
updated if the user were to submit it. Therefore, it would make since to
just disable the comment button when the text editor is empty.
This is inline with what GitHub does when given empty text editor input.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Related to #23461, and help some cases like #31412
For developers, they could use browser's Performance tool to collect
performance data, while this PR is also quite handy to optimize the
`index.js`.
For end users, this PR is simple enough and could figure out the slow
function quickly.
This change fixes cases when a Wiki page refers to a video stored in the
Wiki repository using relative path. It follows the similar case which
has been already implemented for images.
Test plan:
- Create repository and Wiki page
- Clone the Wiki repository
- Add video to it, say `video.mp4`
- Modify the markdown file to refer to the video using `<video
src="video.mp4">`
- Commit the Wiki page
- Observe that the video is properly displayed
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
See
https://docs.docker.com/reference/build-checks/legacy-key-value-format/.
Fixes these warnings seen during the docker build:
```
4 warnings found (use --debug to expand):
- LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format (line 5)
- LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format (line 9)
- LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format (line 75)
- LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format (line 76)
```
Introduced in: https://github.com/moby/buildkit/pull/4923
Almost works like GitHub
* use Tab/Shift-Tab to indent/unindent the selected lines
* use Enter to insert a new line with the same indentation and prefix
The avatar on "New Issue" and "New Pull Request" pages was inconsistent.
Removed the extra margin and the new CSS rules now use common parent
`<form id="#new-issue">` because `.repository.new.issue` is not present
on pull request page.
This PR modifies the structs for editing and creating org teams to allow
team names to be up to 255 characters. The previous maximum length was
30 characters.
This PR only does "renaming":
* `Route` should be `Router` (and chi router is also called "router")
* `Params` should be `PathParam` (to distingush it from URL query param, and to match `FormString`)
* Use lower case for private functions to avoid exposing or abusing
- Result of `make update-js`
- Added 1 new eslint rule
- Autofixed 1 new eslint issue
- Remove `eslint-plugin-jquery` as `eslint-plugin-no-jquery` does all it
does and is actually the maintained fork of it.
- Tested all affected `dependencies`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. There are already global "unit consts", no need to use context data, which is fragile
2. Remove the "String()" method from "unit", it would only cause rendering problems in templates
---------
Co-authored-by: silverwind <me@silverwind.io>
Add a test to probe the cache similar to the email test func.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: silverwind <me@silverwind.io>
Fix regression from https://github.com/go-gitea/gitea/pull/30712 where
the introduction of this `<div>` caused the `.ui.attached:not(.message)
+ .ui.attached.segment:not(.top)` CSS selector to no longer work and
cause a double border.
Before:
<img width="200" alt="Screenshot 2024-06-13 at 19 06 12"
src="a9fa0688-adf0-4b2d-a958-6a7679a62031">
After:
<img width="232" alt="Screenshot 2024-06-13 at 19 05 57"
src="025b780f-f72f-4049-86de-a5d84851bd1d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Parse base path and tree path so that media links can be correctly
created with /media/.
Resolves#31294
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#31361, and add tests
And this PR introduces an undocumented & debug-purpose-only config
option: `USE_SUB_URL_PATH`. It does nothing for end users, it only helps
the development of sub-path related problems.
And also fix#31366
Co-authored-by: @ExplodingDragon
According to the maintainers' discussion and voting. We decide to move
docs to https://gitea.com/gitea/docs . Add some hints on this repository
to not make contributors confusing.
Fix#31327
This is a quick patch to fix the bug.
Some parameters are using 0, some are using -1. I think it needs a
refactor to keep consistent. But that will be another PR.
The PR replaces all `goldmark/util.BytesToReadOnlyString` with
`util.UnsafeBytesToString`, `goldmark/util.StringToReadOnlyBytes` with
`util.UnsafeStringToBytes`. This removes one `TODO`.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
fix a bug from #30490
`prs.GetIssueIDs()` will also be used in other places, e.g.
`InvalidateCodeComments`
so we should not add `if pr.Issue == nil` in it, or if `pr.Issue` is
already loaded, you will not get the issueID in the results list and
this is not an expected result.
So this will caused a bug:
before calling `InvalidateCodeComments`, all `pr.Issues` in `prs` are
loaded, so `issueIDs` in this function will always be `[]`.
Fixes regression
https://github.com/go-gitea/gitea/pull/31307#issuecomment-2162554913
Table CSS is weird. A `auto` value does not work and causes the
regression while any pixel value causes another regression in diff where
the code lines do not stretch. Partially revert that PR and clean up
some related too-deep CSS selectors.
<img width="109" alt="Screenshot 2024-06-12 at 15 07 22"
src="756c5dea-44b8-49f9-8a08-acef68075f62">
<img width="119" alt="Screenshot 2024-06-12 at 15 07 43"
src="28ae1adc-118e-4016-8d09-033b9f1c9a6f">
<img width="151" alt="Screenshot 2024-06-12 at 15 07 07"
src="08db7ed9-de4e-405e-874d-c7ebe3082557">
<img width="141" alt="Screenshot 2024-06-12 at 15 07 14"
src="c4a5492b-1bf1-4773-bc8d-64eb36d823f9">
When using the MinIO storage driver for Actions Artifacts, we found that
the chunked artifact required significantly more memory usage to both
upload and merge than the local storage driver. This seems to be related
to hardcoding a value of `-1` for the size to the MinIO client [which
has a warning about memory usage in the respective
docs](https://pkg.go.dev/github.com/minio/minio-go/v7#Client.PutObject).
Specifying the size in both the upload and merge case reduces memory
usage of the MinIO client.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Line numbers were using some hacky CSS `width: 1%` that did nothing to
the code rendering as far as I can tell but broken the inline preview in
markup when line numbers are greater than 2 digits. Also I removed one
duplicate `font-family` rule (it is set below in the `.lines-num,
.lines-code` selector.
Remove and forbid [.text()](https://api.jquery.com/text/). Tested some,
but not all functionality, but I think these are pretty safe
replacements.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Bug: orange button color was removed in
https://github.com/go-gitea/gitea/pull/30475, replaced with red
Bug: translation text was not html-escaped
Refactor: Replaced as much jQuery as possible, added useful
`createElementFromHTML`
Refactor: Remove colors checks that don't exist on `.link-action`
<img width="381" alt="image"
src="5900bf6a-8a86-4a86-b368-0559cbfea66e">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
before:
***The problem was that the icon and text were not on a horizontal line,
and the horizontal was not centered;***
after:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR introduces the `ReviewedOn` and `ReviewedBy` variables for the
default merge message templates (e.g.,
`.gitea/default_merge_message/MERGE_TEMPLATE.md`).
This allows customizing the default merge messages while retaining these
trailers.
This also moves the associated logic out of `pull.tmpl` into the
relevant Go function.
This is a first contribution towards #11077.
---
For illustration, this allows to recreate the "default default" merge
message with the following template:
```
.gitea/default_merge_message/MERGE_TEMPLATE.md
Merge pull request '${PullRequestTitle}' (${PullRequestReference}) from ${HeadBranch} into ${BaseBranch}
${ReviewedOn}
${ReviewedBy}
```
This solution implements a new config variable MAX_ROWS, which
corresponds to the “Maximum allowed rows to render CSV files. (0 for no
limit)” and rewrites the Render function for CSV files in markup module.
Now the render function only reads the file once, having MAX_FILE_SIZE+1
as a reader limit and MAX_ROWS as a row limit. When the file is larger
than MAX_FILE_SIZE or has more rows than MAX_ROWS, it only renders until
the limit, and displays a user-friendly warning informing that the
rendered data is not complete, in the user's language.
---
Previously, when a CSV file was larger than the limit, the render
function lost its function to render the code. There were also multiple
reads to the file, in order to determine its size and render or
pre-render.
The warning: 
Change the copy to use `ActionsArtifact.StoragePath` instead of the
`ArtifactPath`. Skip artifacts that are expired, and don't error if the
file to copy does not exist.
---
When trying to migrate actions artifact storage from local to MinIO, we
encountered errors that prevented the process from completing
successfully:
* The migration tries to copy the files using the per-run
`ArtifactPath`, instead of the unique `StoragePath`.
* Artifacts that have been marked expired and had their files deleted
would throw an error
* Artifacts that are pending, but don't have a file uploaded yet will
throw an error.
This PR addresses these cases, and allow the process to complete
successfully.
Uses `gopls check <files>` as a linter. Tested locally and brings up 149
errors currently for me. I don't think I want to fix them in this PR,
but I would like at least to get this analysis running on CI.
List of errors:
```
modules/indexer/code/indexer.go:181:11: impossible condition: nil != nil
routers/private/hook_post_receive.go:120:15: tautological condition: nil == nil
services/auth/source/oauth2/providers.go:185:9: tautological condition: nil == nil
services/convert/issue.go:216:11: tautological condition: non-nil != nil
tests/integration/git_test.go:332:9: impossible condition: nil != nil
services/migrations/migrate.go:179:24-43: unused parameter: ctx
services/repository/transfer.go:288:48-69: unused parameter: doer
tests/integration/api_repo_tags_test.go:75:41-61: unused parameter: session
tests/integration/git_test.go:696:64-74: unused parameter: baseBranch
tests/integration/gpg_git_test.go:265:27-39: unused parameter: t
tests/integration/gpg_git_test.go:284:23-29: unused parameter: tmpDir
tests/integration/gpg_git_test.go:284:31-35: unused parameter: name
tests/integration/gpg_git_test.go:284:37-42: unused parameter: email
```
`overflow-wrap: anywhere` is a superior alternative to `word-wrap:
break-word` and we were already setting it in the class. I tested a few
cases, all look good.
Using `.segment` on the project columns is a major abuse of that class,
so remove it and instead set the border-radius directly on it.
Fixes: https://github.com/go-gitea/gitea/issues/31129
Fixes issue when running `choco info pkgname` where `pkgname` is also a
substring of another package Id.
Relates to #31168
---
This might fix the issue linked, but I'd like to test it with more choco
commands before closing the issue in case I find other problems if
that's ok.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Move the previous custom `tw-` classes to be defined in a tailwind
plugin. I think it's cleaner that way and I also verified double-class
works as expected:
<img width="299" alt="Screenshot 2024-05-30 at 19 06 24"
src="003cbc76-2013-46a0-9e27-63023fa7c7a4">
One new error regarding `fmt.Fscanf` error return in `gitdiff.go` but
I'm not touching that further right now as handling the error would
introduce a behaviour difference.
Resolves#31167.
https://github.com/go-gitea/gitea/pull/30885 changed the behavior of
`repo.AvatarLink()` where it can now take the empty string and append it
to the app data URL. This does not point to a valid avatar image URL,
and, as the issue mentions, previous Gitea versions returned the empty
string.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR implemented object storages(LFS/Packages/Attachments and etc.)
for Azure Blob Storage. It depends on azure official golang SDK and can
support both the azure blob storage cloud service and azurite mock
server.
Replace #25458Fix#22527
- [x] CI Tests
- [x] integration test, MSSQL integration tests will now based on
azureblob
- [x] unit test
- [x] CLI Migrate Storage
- [x] Documentation for configuration added
------
TODO (other PRs):
- [ ] Improve performance of `blob download`.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Reduce accident closing of tickets only to re-open them right away. This
aligns the text on these buttons with what GitHub has.
Commit is authored by @LazyDodo, and was committed to the Blender fork
by @brechtvl
Background details:
https://projects.blender.org/infrastructure/gitea-custom/pulls/7
Co-authored-by: Ray Molenkamp <github@lazydodo.com>
Fixes: https://github.com/go-gitea/gitea/issues/31068
- Now it only does a single call to `GetExpandDirection` per line
instead of multiples.
- Exposed `data-expand-direction` to frontend so it can correctly size
the buttons (it's a pain to do in tables).
<img width="142" alt="Screenshot 2024-05-27 at 20 44 56"
src="8b0b45a6-8e50-4081-8822-5e0775d8d941">
<img width="142" alt="Screenshot 2024-05-27 at 20 44 51"
src="b7ba2c57-8f55-4e9f-9606-c96d16b77892">
<img width="132" alt="Screenshot 2024-05-27 at 20 44 46"
src="0e838fb8-5e8c-4250-9843-a68b88d5418b">
<img width="80" alt="Screenshot 2024-05-27 at 20 44 33"
src="da6c7f83-c160-4389-8ab2-889d0568cbe8">
<img width="80" alt="Screenshot 2024-05-27 at 20 44 26"
src="cdb490b2-5040-484a-92e5-46fc5e37c199">
<img width="78" alt="Screenshot 2024-05-27 at 20 44 20"
src="d2978ab0-764e-41ff-922c-25f8fe749f28">
Would backport as trivial enhancement.
This allows `nix flake metadata` and nix in general to lock a *branch*
tarball link in a manner that causes it to fetch the correct commit even
if the branch is updated with a newer version.
Co-authored-by: Jade Lovelace <software@lfcode.ca>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes: https://github.com/go-gitea/gitea/issues/31071
Not perfect but much better than before.
Before: Overflows, sticky not working, filename unreadable:
<img width="506" alt="Screenshot 2024-05-27 at 02 02 40"
src="a06b1edf-dece-4402-98c2-68670fca265f">
After:
<img width="457" alt="Screenshot 2024-05-27 at 01 59 06"
src="2a282c96-e719-4554-b418-81963ae6269c">
- Add `eslint-plugin-no-use-extend-native` to exclude list because it
requires flat config
- Exclude `@github/text-expander-element` because new version has broken
positioning
- Tested mermaid, monaco, swagger, chartjs
We wanted to be able to use the IAM role provided by the EC2 instance
metadata in order to access S3 via the Minio configuration. To do this,
a new credentials chain is added that will check the following locations
for credentials when an access key is not provided. In priority order,
they are:
1. MINIO_ prefixed environment variables
2. AWS_ prefixed environment variables
3. a minio credentials file
4. an aws credentials file
5. EC2 instance metadata
This PR split the `Board` into two parts. One is the struct has been
renamed to `Column` and the second we have a `Template Type`.
But to make it easier to review, this PR will not change the database
schemas, they are just renames. The database schema changes could be in
future PRs.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: yp05327 <576951401@qq.com>
Instead of always displaying all available actions as buttons, merge
them into a single dropdown menu, same as GitHub. That decreases visual
overload and is more mobile-friendly, while not losing any
functionality.
## Screenshots
<details><summary>Before</summary>
</details>
<details><summary>After (unexpanded)</summary>
</details>
<details><summary>After (expanded)</summary>
</details>
1. Extend concept of https://github.com/go-gitea/gitea/pull/29831 to all
tabular menus, there were only three left that weren't already
`<overflow-menu>`.
<img width="634" alt="Screenshot 2024-05-27 at 00 42 16"
src="d9a7e219-d05e-40a1-9e93-777f9a8a90dd">
<img width="965" alt="Screenshot 2024-05-27 at 00 29 32"
src="e6ed71b1-11fb-4a74-9adb-af4524286cff">
2. Remove extra padding on `fluid padded` container like for example PR
diff view. The page margin is already correctly sized via
`.ui.container`, so this was just extraneous padding that looked ugly.
Before:
<img width="1351" alt="Screenshot 2024-05-27 at 00 45 11"
src="4b45fd11-b1b2-4fbb-a618-26eb22be9472">
After:
<img width="1344" alt="Screenshot 2024-05-27 at 00 45 22"
src="d09593eb-6c7f-45e7-85b6-f0050047004b">
3. Replace `gt-word-break` with `tw-break-anywhere` in issue-title,
fixing overflow.
Before:
<img width="1333" alt="Screenshot 2024-05-27 at 00 50 14"
src="64d15d04-b456-401e-a972-df636965f0eb">
After:
<img width="1316" alt="Screenshot 2024-05-27 at 00 50 26"
src="ed1ce830-1408-414b-8263-eeaf773f52c8">
Fix#25897Fix#30322#29464 cannot handle some complex `if` conditions correctly because it
only checks `always()` literally. In fact, it's not easy to evaluate the
`if` condition on the Gitea side because evaluating it requires a series
of contexts. But act_runner is able to evaluate the `if` condition
before running the job (for more information, see
[`gitea/act`](517d11c671/pkg/runner/run_context.go (L739-L753)))
. So we can use act_runner to check the `if` condition.
In this PR, how to handle a blocked job depends on its `needs` and `if`:
- If not all jobs in `needs` completed successfully and the job's `if`
is empty, set the job status to `StatusSkipped`
- In other cases, the job status will be set to `StatusWaiting`, and
then act_runner will check the `if` condition and run the job if the
condition is met
Presumably a regression from
https://github.com/go-gitea/gitea/pull/30325, these menus were showing a
border radius on hover, which is fixed with this change.
<img width="154" alt="image"
src="eafdc1c5-3cf5-48d1-86c4-21c58f92cfaf">
This PR adds some fields to the gitea webhook payload that
[openproject](https://www.openproject.org/) expects to exists in order
to process the webhooks.
These fields do exists in Github's webhook payload so adding them makes
Gitea's native webhook more compatible towards Github's.
Percentage-based `border-radius` [creates undesirable
ellipse](https://jsfiddle.net/silverwind/j9ko5wnt/4/) on non-square
content. Instead, use pixel value and use same wording `full` like
tailwind does, but increast to 99999px over their 9999px.
To try it you need **nix** installed `nix-daemon ` running and your user
has to be member of the **nix-users** group. Or use NixOS.
then by just:
```sh
nix develop -c $SHELL
```
a dedicated development environment with all needed packages will be
created.
There's a bug in #25715:
If user pushed a commit into another repo with same branch name, the
no-related repo will display the recently pushed notification
incorrectly.
It is simple to fix this, we should match the repo id in the sql query.
The latest commit is 2 weeks ago.
The notification comes from another repo with same branch name:
After:
In forked repo:
New PR Link will redirect to the original repo:
In the original repo:
New PR Link:
In the same repo:
New PR Link:
08/15 Update:
Follow #26257, added permission check and logic fix mentioned in
https://github.com/go-gitea/gitea/pull/26257#discussion_r1294085203
2024/04/25 Update:
Fix#30611
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace #25741Close#24445Close#30658Close#20646
~Depends on #30805~
Since #25741 has been rewritten totally, to make the contribution
easier, I will continue the work in this PR. Thanks @6543
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
From
https://github.com/go-gitea/gitea/issues/31018#issuecomment-2119622680.
This commit removes the link to a deleted branch name because it returns
a 404 while it is in this deleted state. GitHub also throws a 404 when
navigating to a branch link that was just deleted, but this deleted
branch is removed from the branch list after a page refresh. Since with
Gitea this deleted branch would be kept around for quite some time
(well, until the "cleanup deleted branches" cron job begins), it makes
sense to not have this as a link that users can navigate to.
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
According to [RFC
6749](https://datatracker.ietf.org/doc/html/rfc6749#section-4.1.2.1),
when the resource owner or authorization server denied an request, an
`access_denied` error should be returned. But currently in this case
Gitea does not return any error.
For example, if the user clicks "Cancel" here, an `access_denied` error
should be returned.
<img width="360px"
src="be31c09b-4c0a-4701-b7a4-f54b8fe3a6c5"
/>
PackageDescriptor.Metadata might be nil (and maybe not only for maven).
This is only a quick fix.
The new `if` block is written intentionally to avoid unnecessary
indenting to the existing code.
When comparing files between the base repo and forked repo, the "blob
excerpt" link should point to the forked repo, because the commit
doesn't exist in base repo.
Co-authored-by: Giteabot <teabot@gitea.io>
By the way:
* Re-format the "color.go" to Golang code style
* Remove unused `overflow-y: scroll;` from `.project-column` because
there is `overflow: visible`
When creating a repo, the "FORCE_PRIVATE" config option should be
respected, `readonly` doesn't work for checkbox, so it should use
`disabled` attribute.
Fix#31002
1. Mention Make sure `Host` and `X-Fowarded-Proto` headers are correctly passed to Gitea
2. Clarify the basic requirements and move the "general configuration" to the top
3. Add a comment for the "container registry"
4. Use 1.21 behavior if the reverse proxy is not correctly configured
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The `errorCode` and `warningCode` options were removed at some point,
they are not recognized by golangci-lint any more at least and they do
not match their published json schema. `confidence` and
`ignore-generated-header` are at the default value so does not need to
be configured.
https://golangci-lint.run/usage/linters/#revive
Add a configuration item to enable S3 virtual-hosted style (V2) to solve
the problem caused by some S3 service providers not supporting path
style (V1).
Resolve#30917
Make the APIs for adding labels and replacing labels support both label
IDs and label names so the
[`actions/labeler`](https://github.com/actions/labeler) action can work
in Gitea.
<img width="600px"
src="7835c771-f637-4c57-9ce5-e4fbf56fa0d3"
/>
Fix#30872
We will assume the database is consistent before executing the
migration. So the indexes should exist. Removing `IF EXIST` then is safe
enough.
---------
Co-authored-by: silverwind <me@silverwind.io>
Forbid
[deprecated](https://drafts.csswg.org/css-text-3/#word-break-property)
`break-word` and fix all occurences.
Regarding `overflow-wrap: break-word` vs `overflow-wrap: anywhere`:
Example of difference: https://jsfiddle.net/silverwind/1va6972r/
[Here](https://stackoverflow.com/questions/77651244) it says:
> The differences between normal, break-word and anywhere are only clear
if you are using width: min-content on the element containing the text,
and you also set a max-width. A pretty rare scenario.
I don't think this difference will make any practical impact as we are
not hitting this rare scenario.
It's time (maybe somewhat late) to remove some deprecated stuff for the
runner.
- `x-runner-version`: runners needn't to report version in every
request, they will call `Declare`.
- `AgentLabels`: runners will report them as `Labels`.
Fix#30521
we should sync branches first, then detect default branch, or
`git_model.FindBranchNames` will always return empty list, and the
detection will be wrong.
# The problem
The previous implementation will start multiple POST requests from the
frontend when moving a column and another bug is moving the default
column will never be remembered in fact.
# What's changed
- [x] This PR will allow the default column to move to a non-first
position
- [x] And it also uses one request instead of multiple requests when
moving the columns
- [x] Use a star instead of a pin as the icon for setting the default
column action
- [x] Inserted new column will be append to the end
- [x] Fix#30701 the newly added issue will be append to the end of the
default column
- [x] Fix when deleting a column, all issues in it will be displayed
from UI but database records exist.
- [x] Add a limitation for columns in a project to 20. So the sorting
will not be overflow because it's int8.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Hello! After contributing for some time I am interested in taking a more
involved role as a maintainer. When time allows it, I plan to perform
code reviews, continue resolving/triaging issues, and engage with the
community to see if I can offer any useful insights. My current
interests are in backend work, but I plan to study the web frontend
architecture to see if I can contribute there as well.
Thanks for this awesome project. I hope I can both learn and contribute
to its continued success!
PR list:
https://github.com/go-gitea/gitea/pulls?q=is%3Apr+is%3Aclosed+author%3Akemzeb
Discord: kemzeb
Merging PR may fail because of various problems. The pull request may
have a dirty state because there is no transaction when merging a pull
request. ref
https://github.com/go-gitea/gitea/pull/25741#issuecomment-2074126393
This PR moves all database update operations to post-receive handler for
merging a pull request and having a database transaction. That means if
database operations fail, then the git merging will fail, the git client
will get a fail result.
There are already many tests for pull request merging, so we don't need
to add a new one.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Before this patch, we were using `Date` getter/setter methods that
worked with local time to get a list of Sundays that are in the range of
some start date and end date. The problem with this was that the Sundays
are in Unix epoch time and when we changed the "startDate" argument that
was passed to make sure it is on a Sunday, this change would be
reflected when we convert it to Unix epoch time. More specifically, I
observed that we may get different Unix epochs depending on your
timezone when the returned list should rather be timezone-agnostic.
This led to issues in US timezones that caused the contributor, code
frequency, and recent commit charts to not show any chart data. This fix
resolves this by using getter/setter methods that work with UTC since it
isn't dependent on timezones.
Fixes#30851.
---------
Co-authored-by: Sam Fisher <fisher@3echelon.local>
1. "enter" doesn't work (I think it is the last enter support for #14843)
2. if a branch name contains something like `&`, then the branch selector doesn't update
Since there is now a second `<input>` in the repo buttons, we can make a
better-looking layout with no empty space, except on mobile.
Also I fixed one bug with focus border on clone panel.
## Large
<img width="1163" alt="Screenshot 2024-04-23 at 22 25 22"
src="8135a572-aa67-4672-ad49-b76b06890b52">
## Medium
<img width="870" alt="Screenshot 2024-04-23 at 22 25 34"
src="9e93f61c-3315-4a78-8328-8cefad5b50fa">
## Mobile
<img width="416" alt="Screenshot 2024-04-23 at 22 25 52"
src="859e341f-807a-48e6-8bcf-31715963216c">
This commit forces the resource owner (user) to always approve OAuth 2.0
authorization requests if the client is public (e.g. native
applications).
As detailed in [RFC 6749 Section 10.2](https://www.rfc-editor.org/rfc/rfc6749.html#section-10.2),
> The authorization server SHOULD NOT process repeated authorization
requests automatically (without active resource owner interaction)
without authenticating the client or relying on other measures to ensure
that the repeated request comes from the original client and not an
impersonator.
With the implementation prior to this patch, attackers with access to
the redirect URI (e.g., the loopback interface for
`git-credential-oauth`) can get access to the user account without any
user interaction if they can redirect the user to the
`/login/oauth/authorize` endpoint somehow (e.g., with `xdg-open` on
Linux).
Fixes#25061.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Before, we would just throw 500 if a user passes an attachment that is
not an allowed type. This commit catches this error and throws a 422
instead since this should be considered a validation error.
Makes it easier to use because you see which square is currently
hovered:
<img width="314" alt="Screenshot 2024-05-02 at 15 38 20"
src="3a15dad1-2259-4f28-9fae-5cf6ad3d8798">
I did try a `scoped` style for this, but that did not work for some
reason.
The test had a dependency on `https://api.pwnedpasswords.com` which
caused many failures on CI recently:
```
--- FAIL: TestPassword (2.37s)
pwn_test.go:41: Get "https://api.pwnedpasswords.com/range/e6b6a": context deadline exceeded (Client.Timeout exceeded while awaiting headers)
FAIL
coverage: 82.9% of statements
```
Before, lot of empty space when no labels or body:
<img width="281" alt="Screenshot 2024-05-02 at 13 51 29"
src="8a980ccd-d53c-43a3-a059-dc8c614621e1">
After, empty space collapsed:
<img width="306" alt="Screenshot 2024-05-02 at 13 51 16"
src="8d9c154d-5de1-43d0-8536-afd9194d99b3">
All `<p>` (unsuitable) and `<small>` (discouraged in favor of css) tags
are removed.
Fixes https://github.com/go-gitea/gitea/issues/30721 and overhauls the
stopwatch. Time is now shown inside the "dot" icon and on both mobile
and desktop. All rendering is now done by `<relative-time>`, the
`pretty-ms` dependency is dropped.
Desktop:
<img width="557" alt="Screenshot 2024-04-29 at 22 33 27"
src="3a46cdbf-6af2-4bf9-b07f-021348badaac">
Mobile:
<img width="640" alt="Screenshot 2024-04-29 at 22 34 19"
src="8a2beea7-bd5d-473f-8fff-66f63fd50877">
Note for tippy:
Previously, tippy instances defaulted to "menu" theme, but that theme is
really only meant for `.ui.menu`, so it was not optimal for the
stopwatch popover.
This introduces a unopinionated `default` theme that has no padding and
should be suitable for all content. I reviewed all existing uses and
explicitely set the desired `theme` on all of them.
If an user is deactivated, it should not be in the list of users who are
suggested to be assigned or review-requested.
old assignees or reviewers are not affected.
---
*Sponsored by Kithara Software GmbH*
I guess there could be enough people liking to make the Settings menu
item right aligned. As a site admin, I found it's easier to find the
right-aligned Settings menu item.
Tested with various sizes:
Caused by #30076.
There may be some duplicate status check contexts when setting status
checks for a branch protection rule. The duplicate contexts should be
removed.
Before:
<img
src="97f4de2d-4868-47a3-8a99-5a180f9ac0a3"
width="600px" />
After:
<img
src="ff7289c5-9793-4090-ba31-e8cb3c85f8a3"
width="600px" />
Fixes https://github.com/go-gitea/gitea/issues/30673, all 23 issues.
Notes:
- Tab bar menus had to change to pills because of unsolvable issue with
the border-radius as tab bar renders a overlapping border onto the box
below. And I think pills look better.
- Added padding to code editor empty preview message
- Hide monaco's built-in blue focus border, we don't need it and it
never showed before either.
- Label add menu is simplified, removing the nested segment.
<img width="1322" alt="Screenshot 2024-04-25 at 22 26 19"
src="7e394e0c-b7ad-417d-8e9f-12f1dea93ed1">
<img width="1326" alt="Screenshot 2024-04-25 at 22 28 00"
src="66c8499f-aa9f-4d95-8cca-ef13dfa82c65">
<img width="997" alt="Screenshot 2024-04-25 at 22 36 53"
src="07896102-c71d-4246-8173-c2bc2e1d3cae">
<img width="832" alt="Screenshot 2024-04-25 at 22 56 09"
src="d83afc96-08ca-4adc-baf4-3d02804be57c">
<img width="361" alt="Screenshot 2024-04-25 at 22 57 12"
src="c7371a68-00b5-47d8-84d0-ddc5268b2b2c">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
When you cross-compile Gitea and you specify one of the envrionment
variables related to C flags, cgo will fail to build the generator
programs (e.g. generate-bindata) because GOOS and GOARCH are unset, but
those additional flags variables are not unset together with those.
To solve this issue, the simplest way that I've found is to disable cgo
in the `go generate` command as it's not really used there.
For example, I've had this problem with cross-compiling Gitea on FreeBSD
x86_64 to ARMv7 where it's necessary to pass `--target` to `clang` via
`CGO_CFLAGS`:
```
GOOS=freebsd \
GOARCH=arm \
GGOARM=7 \
CGO_ENABLED=1 \
SYSROOT=/usr/local/freebsd-sysroot/armv7 \
CC=clang \
CGO_CFLAGS="--target=armv7-unknown-freebsd13.2-gnueabihf" \
TAGS="bindata sqlite sqlite_unlock_notify" \
make SHELL='sh -x' build
```
```
Running go generate...
# runtime/cgo
In file included from gcc_freebsd_amd64.c:9:
In file included from /usr/include/signal.h:42:
/usr/include/sys/_ucontext.h:44:2: error: unknown type name 'mcontext_t'
modules/migration/schemas_bindata.go:8: running "go": exit status 1
# runtime/cgo
In file included from gcc_freebsd_amd64.c:9:
In file included from /usr/include/signal.h:42:
/usr/include/sys/_ucontext.h:44:2: error: unknown type name 'mcontext_t'
modules/options/options_bindata.go:8: running "go": exit status 1
# runtime/cgo
In file included from gcc_freebsd_amd64.c:9:
In file included from /usr/include/signal.h:42:
/usr/include/sys/_ucontext.h:44:2: error: unknown type name 'mcontext_t'
modules/public/public_bindata.go:8: running "go": exit status 1
# runtime/cgo
In file included from gcc_freebsd_amd64.c:9:
In file included from /usr/include/signal.h:42:
/usr/include/sys/_ucontext.h:44:2: error: unknown type name 'mcontext_t'
modules/templates/templates_bindata.go:8: running "go": exit status 1
gmake[1]: *** [Makefile:781: generate-go] Error 1
*** Error code 2
Stop.
```
But with this fix Gitea compiles successfully.
Documentation building has encountered a problem like below. This is
because MDX syntax doesn't allow `{customPath}`, we have to use
\`{customPath}\`
```
Error: Can't render static file for pathname "/next/administration/config-cheat-sheet"
at generateStaticFile (/workspace/gitea/gitea-docusaurus/node_modules/@docusaurus/core/lib/ssg.js:119:15)
at runNextTicks (node:internal/process/task_queues:60:5)
at process.processImmediate (node:internal/timers:449:9)
at async /workspace/gitea/gitea-docusaurus/node_modules/p-map/index.js:57:22 {
[cause]: ReferenceError: CustomPath is not defined
at _createMdxContent (server.bundle.js:4406:106)
at MDXContent (server.bundle.js:10745:8)
at Uc (server.bundle.js:264171:44)
at Xc (server.bundle.js:264173:253)
at Z (server.bundle.js:264179:89)
at Yc (server.bundle.js:264182:98)
at $c (server.bundle.js:264181:140)
at Z (server.bundle.js:264179:345)
at Xc (server.bundle.js:264177:231)
at Z (server.bundle.js:264179:89)
```
The jobs in the workflow runs in parallel. The `disk-clean` job actually
does nothing, i.e. it will not clean the disk for `nightly-binary`,
`nightly-docker-rootful`, `nightly-docker-rootless`
Suggested by logs in #30729
- Remove `math/rand.Seed`
`rand.Seed is deprecated: As of Go 1.20 there is no reason to call Seed
with a random value.`
- Replace `math/rand.Read`
`rand.Read is deprecated: For almost all use cases, [crypto/rand.Read]
is more appropriate.`
- Replace `math/rand` with `math/rand/v2`, which is available since Go
1.22
Fixes https://github.com/go-gitea/gitea/issues/30682 and does a few
improvements:
- Use gap instead of margin/padding
- Don't render empty image div
- Remove `right floated` class that did nothing
<img width="406" alt="Screenshot 2024-04-24 at 20 21 20"
src="2fa88707-c2c4-40df-aee7-a684c3097ed0">
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Follow #30472:
When a user is created by command line `./gitea admin user create`:
Old behavior before #30472: the first user (admin or non-admin) doesn't
need to change password.
Revert to the old behavior before #30472
Minor tweaks:
- Remove unnecessary `item` class which was causing unwanted padding to
be added.
- Add some padding and prevent wrapping so it looks better on mobile.
- Increase width by 4px.
<img width="116" alt="Screenshot 2024-04-24 at 00 15 07"
src="1f1cf54c-8053-4297-b309-71d9c2ceb9ee">
<img width="441" alt="Screenshot 2024-04-24 at 00 14 57"
src="2f3a33dc-edad-4b97-b64c-6812aae513cb">
Misspell 0.5.0 supports passing a csv file to extend the list of
misspellings, so I added some common ones from the codebase. There is at
least one typo in a API response so we need to decided whether to revert
that and then likely remove the dict entry.
1. Set
[`BROWSERSLIST_IGNORE_OLD_DATA`](c6ddf7b387/node.js (L400))
to avoid warning on outdated browserslist data which the end user can
likely not do anything about and which is currently visible in the v1.21
branch.
2. Suppress all command echoing and add a "Running webpack..." message
in place.
Warning in question was this:
```
Browserslist: caniuse-lite is outdated. Please run:
npx update-browserslist-db@latest
Why you should do it regularly: https://github.com/browserslist/update-db#readme
```
1. Bring back the background on line numbers. This feature was lost a
long time ago.
<img width="457" alt="Screenshot 2024-04-24 at 01 36 09"
src="76a7f5a9-c22a-4c72-9f0a-ebf16a66513e">
<img width="473" alt="Screenshot 2024-04-24 at 01 22 47"
src="eef06cf2-f1b9-40e3-947d-dd5852ec12a3">
<img width="457" alt="Screenshot 2024-04-24 at 02 13 18"
src="59e317d4-76a7-468c-8a19-10d88c675cc3">
<img width="459" alt="Screenshot 2024-04-24 at 01 23 21"
src="f1a46f8d-8846-4d78-a9d7-8b7dc18ac6e4">
2. Expanded lines background is now full-line, including line numbers:
<img width="1303" alt="Screenshot 2024-04-24 at 01 37 12"
src="271eefe2-0869-424e-93fb-ccd8adc87806">
3. Sort affected colors alphabetically in the CSS
Fixes#14603
- Add endpoint to list repository action secrets in API routes
- Implement `ListActionsSecrets` function to retrieve action secrets
from the database
- Update Swagger documentation to include the new
`/repos/{owner}/{repo}/actions/secrets` endpoint
- Add `actions` package import and define new routes for actions,
secrets, variables, and runners in `api.go`.
- Refactor action-related API functions into `Action` struct methods in
`org/action.go` and `repo/action.go`.
- Remove `actionAPI` struct and related functions, replacing them with
`NewAction()` calls.
- Rename `variables.go` to `action.go` in `org` directory.
- Delete `runners.go` and `secrets.go` in both `org` and `repo`
directories, consolidating their content into `action.go`.
- Update copyright year and add new imports in `org/action.go`.
- Implement `API` interface in `services/actions/interface.go` for
action-related methods.
- Remove individual action-related functions and replace them with
methods on the `Action` struct in `repo/action.go`.
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Now only show the "code search" on the repo home page, because it only
does global search.
So do not show it when viewing file or directory to avoid misleading
users (it doesn't search in a directory)
Great thanks to @oliverpool for figuring out the problem and proposing a
fix.
Regression of #28138
Incorrect hash causes the user's LFS files get all deleted when running
`doctor fix all`
(by the way, remove unused/non-standard comments)
Co-authored-by: Giteabot <teabot@gitea.io>
Fix https://github.com/go-gitea/gitea/issues/30567
When job is a schedule:
When it is a normal one:
also add a 'space' behind `:`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Follow #30454
And fix#24957
When using "preferred_username", if no such field,
`extractUserNameFromOAuth2` (old `getUserName`) shouldn't return an
error. All other USERNAME options do not return such error.
And fine tune some logic and error messages, make code more stable and
more friendly to end users.
Before, item would also resize on hover because of font weight:
<img width="381" alt="Screenshot 2024-04-25 at 01 28 53"
src="4f3291fc-90be-4d66-ae8b-3c2f763cb956">
After:
<img width="381" alt="Screenshot 2024-04-25 at 01 28 40"
src="06145bf2-1ddd-4171-9217-d92c100ea405">
Co-authored-by: Giteabot <teabot@gitea.io>
The previous repository default branch commit status cache will only
store if the commit status has value. So the repository which have no
any commit status will always be fetched from database.
This PR will store the empty state of commit status of a repository into
cache because the cache will be updated once there is a commit status
stored.
Gitea attempts to display image file, pdf file, etc. named readme in the
home code page (but it cannot).
I think only the markdown and plain-text file should be displayed, which
is also the behavior of GitHub.
Co-authored-by: jxshin <zhujiaxinabc@gmail.com>
This is a very old bug with the bottom border-radiuses not being there
and the `:has` selector now makes it possible to cleanly solve it. It
affects all header+segment boxes, which there are many throughout the
UI:
<img width="1017" alt="Screenshot 2024-04-23 at 20 47 21"
src="870fe352-cc38-4bd6-bfe6-9fe8c3066f92">
Follow #29468
1. Interpolate runs-on with variables when scheduling tasks.
2. The `GetVariablesOfRun` function will check if the `Repo` of the run
is nil.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Initial support for #25680
This PR only adds some simple styles from GitHub, it is big enough and
it focuses on adding the necessary framework-level supports. More styles
could be fine-tuned later.
Should resolve#30642.
Before this commit, we were treating an empty `?sort=` query parameter
as the correct sorting type (which is to sort issues in descending order
by their created UNIX time). But when we perform `sort=latest`, we did
not include this as a type so we would sort by the most recently updated
when reaching the `default` switch statement block.
This commit fixes this by considering the empty string, "latest", and
just any other string that is not mentioned in the switch statement as
sorting by newest.
Fix#30643
The old test code is not stable due to the data-race described in the
TODO added at that time.
Make it stable, and remove a debug-only field from old test code.
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
- `.text-thin` and `.text-italic` are not present in CSS so were doing nothing and I removed them.
- `.text.middle` was unused so I removed it.
- `.text.italic` is replaced with `tw-italic`.
- `.text.normal` had exactly one use and it wasn't even needed.
- add a `muted` class to the link to `org_profile_avatar.tmpl`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When a PR is empty, e.g. has neither additions nor deletions, we don't
need to show this:
<img width="125" alt="Screenshot 2024-04-21 at 23 25 38"
src="0b987eb5-66f5-4b9b-b5aa-7e9e267e9b52">
- Update branch existence check to also include tag existence check
- Adjust error message for branch/tag existence check
ref: https://github.com/go-gitea/gitea/pull/30349
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Attempts to resolve#28720.
---
Note that I am not a Gitea administrator so I don't normally use the
gitea CLI. Just saw this issue and wanted an opportunity to understand
how this subcommand works and see if I can add this feature :^)
I tested both with `--skip-db` and without and it appears to not add any
database-specific files to the generated archive i.e. I don't see a
`gitea-db.sql` or `gitea.db` file:
```console
$ TAGS="bindata sqlite sqlite_unlock_notify" make backend
Running go generate...
bindata for migration already up-to-date
bindata for options already up-to-date
bindata for public already up-to-date
bindata for templates already up-to-date
$ ./gitea dump --skip-db
2024/04/20 01:16:11 ...s/setting/session.go:77:loadSessionFrom() [I] Session Service Enabled
2024/04/20 01:16:11 ...s/storage/storage.go:176:initAttachments() [I] Initialising Attachment storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/attachments
2024/04/20 01:16:11 ...s/storage/storage.go:166:initAvatars() [I] Initialising Avatar storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/avatars
2024/04/20 01:16:11 ...s/storage/storage.go:192:initRepoAvatars() [I] Initialising Repository Avatar storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/repo-avatars
2024/04/20 01:16:11 ...s/storage/storage.go:186:initLFS() [I] Initialising LFS storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/lfs
2024/04/20 01:16:11 ...s/storage/storage.go:198:initRepoArchives() [I] Initialising Repository Archive storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/repo-archive
2024/04/20 01:16:11 ...s/storage/storage.go:208:initPackages() [I] Initialising Packages storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/packages
2024/04/20 01:16:11 ...s/storage/storage.go:219:initActions() [I] Initialising Actions storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/actions_log
2024/04/20 01:16:11 ...s/storage/storage.go:223:initActions() [I] Initialising ActionsArtifacts storage with type: local
2024/04/20 01:16:11 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspaces/gitea/data/actions_artifacts
2024/04/20 01:16:11 cmd/dump.go:172:runDump() [I] Dumping local repositories... /workspaces/gitea/data/gitea-repositories
2024/04/20 01:16:11 cmd/dump.go:195:runDump() [I] Skipping database
2024/04/20 01:16:11 cmd/dump.go:229:runDump() [I] Adding custom configuration file from /workspaces/gitea/custom/conf/app.ini
2024/04/20 01:16:11 cmd/dump.go:256:runDump() [I] Packing data directory.../workspaces/gitea/data
2024/04/20 01:16:11 cmd/dump.go:335:runDump() [I] Finish dumping in file /workspaces/gitea/gitea-dump-1713575771.zip
$ unzip /workspaces/gitea/gitea-dump-1713575771.zip -d example
Archive: /workspaces/gitea/gitea-dump-1713575771.zip
. . .
$ ls example/
app.ini custom data repos
$ ls example/data/
actions_artifacts actions_log avatars home indexers jwt queues repo-archive repo-avatars tmp
```
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#28255
The new query uses the id field to sort by "newer". This most not be
correct (usually it is) but it's faster (see #28255).
If someone has a better idea, please propose changes.
Co-authored-by: Giteabot <teabot@gitea.io>
Follow #30495
"HasAccess" behavior wasn't clear, to make it clear:
* Use a new name `HasAnyUnitAccess`, it will be easier to review related
code and permission problems.
* Separate everyone access mode to a separate field, then all calls to
HasAccess are reverted to old behavior before #30495.
* Add new tests.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Thanks to @Zottelchen for looking into problem and proposing the fix.
Ref: https://github.com/astral-sh/uv/issues/3017 ,
https://peps.python.org/pep-0503/
This PR's change is from Zottelchen's work.
And I by the way rename the `$p` to `$pd` because `p` is used as
"package" in code, while `pd` is used as "package description".
----
Co-authored-by: Zottelchen
Follow https://github.com/go-gitea/gitea/pull/30357
When user push to default branch, the schedule trigger user will be the
user.
When disable then enable action units in settings, the schedule trigger
user will be action user.
When repo is a mirror, the schedule trigger user will be action user. (
before it will return error, fixed by #30357)
As scheduled job is a cron, the trigger user should be action user from
Gitea, not a real user.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Related to #30375.
It doesn't make sense to import `modules/web/middleware` and
`modules/setting` in `modules/web/session` since the last one is more
low-level.
And it looks like a workaround to call `DeleteLegacySiteCookie` in
`RegenerateSession`, so maybe we could reverse the importing by
registering hook functions.
Regression of #29920Fixes: #30569
Also this is a rewriting to eliminate the remaining jQuery usages from code.
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes: https://github.com/go-gitea/gitea/issues/30384
On repo settings page, there id `repo_name` was used 5 times on the same
page, some in modal and such. I think we are better off just
auto-generating these IDs in the future so that labels link up with
their form element.
Ideally this id generation would be done in backend in a subtemplate,
but seeing that we already have similar JS patches for checkboxes, I
took the easy path for now.
I also checked that these `#repo_name` were not in use in JS and the
only case where this id appears in JS is on the migration page where
it's still there.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes: https://github.com/go-gitea/gitea/issues/30540
1. Fix all these boxes by adding `bottom attached` and removing a
problematic CSS rule:
<img width="1319" alt="Screenshot 2024-04-17 at 22 25 31"
src="346445a4-4944-4003-a1ef-6f5b0eda624e">
<img width="643" alt="Screenshot 2024-04-17 at 22 21 18"
src="10f17ed3-9ad6-48de-92fa-bac6621815b9">
2. Change the "last commit" box to `ui segment` which has correct
border-radius. Also included is a tiny tweak to make author name ellipse
instead of wrap.
<img width="1331" alt="Screenshot 2024-04-17 at 22 23 23"
src="285fbd45-ced0-4d33-abe3-7384ffa03188">
Co-authored-by: Giteabot <teabot@gitea.io>
Support downloading nuget nuspec manifest[^1]. This is useful for
renovate because it uses this api to find the corresponding repository
- Store nuspec along with nupkg on upload
- allow downloading nuspec
- add doctor command to add missing nuspec files
[^1]:
https://learn.microsoft.com/en-us/nuget/api/package-base-address-resource#download-package-manifest-nuspec
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Add some logic in `convert.ToBranchProtection` to return only the names
associated with readAccess instead of returning all names. This will
ensure consistency in behavior between the frontend and backend.
Fixes: #27694
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Co-authored-by: wenzhuo.zhang <wenzhuo.zhang@geely.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Since #29165, the translations are rendered as HTML in templates, so:
1. if the translation does contain `<>`, use `TrString`
2. use `{dummy}` instead of `<dummy>` as much as possible
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes: https://github.com/go-gitea/gitea/issues/30512
I think this does mean those tools would run on a potential `vendor`
directory, but I'm not sure we really support vendoring of dependencies
anymore.
`release` has a `vendor` prerequisite so likely the source tarballs
contain vendor files?
Fixes: https://github.com/go-gitea/gitea/issues/30524. Slightly restyled
them so that the "knob" is contained inside the background.
<img width="179" alt="Screenshot 2024-04-16 at 21 58 09"
src="be94517b-9cb7-46e2-ae96-fcf6767ce4ba">
<img width="187" alt="Screenshot 2024-04-16 at 21 58 50"
src="c13a1959-5c5a-4e88-9225-e5f6fb72e3e0">
Fixes: https://github.com/go-gitea/gitea/issues/30514
Fixes:
https://github.com/go-gitea/gitea/pull/30288#issuecomment-2057466623
- Fix border-radius regression from
https://github.com/go-gitea/gitea/pull/30475
- Fix and simplify hover state
- Move the modal HTML so it does not interfere with the CSS
- Make the star and unwatch text show on mobile. There is still plenty
of space, below is iPhone 12 viewport size
<img width="696" alt="Screenshot 2024-04-15 at 20 34 03"
src="af90bb00-4671-4973-a255-8eb44ee6ba8d">
<img width="230" alt="Screenshot 2024-04-15 at 20 31 42"
src="986ef533-7a01-4bb0-8dcd-fd19e4259e84">
<img width="233" alt="Screenshot 2024-04-15 at 20 31 47"
src="5b825dd8-0ccc-4d56-9d8f-774abb935b68">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Using the API, a user's _source_id_ can be set in the _CreateUserOption_
model, but the field is not returned in the _User_ model.
This PR updates the _User_ model to include the field _source_id_ (The
ID of the Authentication Source).
- Add new `Compare` struct to represent comparison between two commits
- Introduce new API endpoint `/compare/*` to get commit comparison
information
- Create new file `repo_compare.go` with the `Compare` struct definition
- Add new file `compare.go` in `routers/api/v1/repo` to handle
comparison logic
- Add new file `compare.go` in `routers/common` to define `CompareInfo`
struct
- Refactor `ParseCompareInfo` function to use `common.CompareInfo`
struct
- Update Swagger documentation to include the new API endpoint for
commit comparison
- Remove duplicate `CompareInfo` struct from
`routers/web/repo/compare.go`
- Adjust base path in Swagger template to be relative (`/api/v1`)
GitHub API
https://docs.github.com/en/rest/commits/commits?apiVersion=2022-11-28#compare-two-commits
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix a number of text overflow issues in actions view and run list. Also
improve mobile view of run list.
Fixes: https://github.com/go-gitea/gitea/issues/30328
<img width="782" alt="Screenshot 2024-04-08 at 23 10 16"
src="3d9f9f88-3eab-44a0-8144-30c2b58b24cb">
<img width="935" alt="Screenshot 2024-04-08 at 23 17 46"
src="581d73ea-a31d-416b-be3a-47313b879b12">
<img width="1008" alt="Screenshot 2024-04-08 at 23 49 05"
src="c5d10565-f285-477f-8659-1caf94797647">
<img width="397" alt="Screenshot 2024-04-08 at 23 55 30"
src="368aaa75-1903-4058-9d75-d1fe91c564d6">
Small tweak here to prevent this and likely other events from
overflowing in the timeline:
<img width="895" alt="Screenshot 2024-04-14 at 22 53 17"
src="001b4f6b-f649-44ff-b2f0-c8e0dedeb384">
Co-authored-by: Giteabot <teabot@gitea.io>
So it happened to me multiple times that air leaves zombie processes
after termination. I think ultimately it's some kind of bug in air, but
we can work around.
The change in the delay is unrelated to the zombie processes but seems
to help a bit with duplicate changes resulting in duplicate `make
generate` as seen here:
<img width="424" alt="Screenshot 2024-04-14 at 17 05 47"
src="6dd1d787-6be3-4fb2-8b0b-cd711c281793">
---------
Co-authored-by: delvh <dev.lh@web.de>
The target_url is necessary for the UI, but missed in
commit_status_summary table. This PR fix it.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Added new class `flex-container-sidebar` to cover the dashboard sidebar.
Previously this was 37.5% with more padding. Now there is less empty
space between the two columns and this matches other pages like repo or
admin settings page.
Desktop:
<img width="1345" alt="Screenshot 2024-03-31 at 15 11 36"
src="717389d9-d42c-466e-a8fe-e968f79447fd">
Mobile:
<img width="444" alt="Screenshot 2024-03-31 at 15 11 44"
src="7faa840b-513a-411b-bf2d-26d52b9b71a0">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Enable `no-sizzle` lint rule, there was only one use in `initCompReactionSelector` and:
- Remove all jQuery except the necessary fomantic dropdown init
- Remove the recursion, instead bind event listeners to common parent container nodes
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
1. add border-radius and spacing to bars
2. use tailwind background classes
3. Add more space around activity list headers
<img width="983" alt="Screenshot 2024-03-27 at 23 40 54"
src="70f72c30-e69f-4ecb-882f-32b8bc94d638">
<img width="1020" alt="Screenshot 2024-03-27 at 23 41 02"
src="a35dbbda-515c-40b0-938a-d759f9686b8e">
Fix regression from
e0b018706f
where opening to a code comment via hash link would give this error:
<img width="1247" alt="image"
src="f9aaeded-8492-4416-9a73-afa0c56220a7">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Cookies may exist on "/subpath" and "/subpath/" for some legacy reasons (eg: changed CookiePath behavior in code). The legacy cookie should be removed correctly.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Since https://github.com/go-gitea/gitea/pull/25686, a few `interface{}`
have sneaked into the codebase. Add this replacement to `make fmt` to
prevent this from happening again.
Ideally a linter would do this, but I haven't found any suitable.
Fix#30416.
Before (it shows as "Unset" while there's a token):
<img width="980" alt="image"
src="d7148e3e-62c9-4d2e-942d-3d795b79515a">
After:
<img width="977" alt="image"
src="24aaa1db-5baa-4204-9081-470b15ea72b5">
The username shows as "oauth2" because of
f9fdac9809/services/migrations/dump.go (L99)
I have checked that all usage of `MirrorRemoteAddress` has been updated.
<img width="1806" alt="image"
src="2f042501-2824-4511-9203-c84a6731a02d">
However, it needs to be checked again when backporting.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
1. Check whether the label is for an issue or a pull request.
2. Don't use space to layout
3. Make sure the test strings have trailing spaces explicitly, to avoid
some IDE removing the trailing spaces automatically.
Fixes https://github.com/go-gitea/gitea/issues/30442
It's inconvenient to have new untracked files show up in git when
switching to older branches that had generated them.
Introduce a list of such files and folders to gitignore and
dockerignore.
It's better having to update these less often, so unlock a few
dependencies that I trust enough to not break to their latest major
versions. This excludes any tool still at major version 0 and
golangci-lint can't really be unlocked either because new versions
almost always break there.
For the v0 packages, I've opened
https://github.com/golangci/misspell/issues/14 and
https://github.com/mvdan/gofumpt/issues/303.
- Switched to plain JavaScript
- Tested the commit graph and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This patch improves the migration from gitbucket to gitea.
The gitbucket uses it's own internal perPage value (= 25) for paging and
ignore per_page arguments in the requested URL. This cause gitea to
migrate only 25 issues and 25 PRs from gitbucket repository. This may
not happens on old gitbucket. But recent gitbucket 4.40 or 4.38.4 has
this problem.
This patch change to use this internally hardcoded perPage of gitbucket
as gitea's maxPerPage numer when migrating from gitbucket. There are
several perPage values in gitbucket like 25 for Isseus/PRs and 10 for
Releases. Some of those API doesn't support paging yet. It sounds
difficult to implement, but using the minimum number among them worked
out very well. So, I use 10 in this patch.
Brief descriptions of problems and this patch are also available in
https://github.com/go-gitea/gitea/issues/30316.
In addition, I'm not sure what kind of test cases are possible to write
here. It's a test for migration, so it requires testing gitbucket server
and gitea server, I guess. Please let me know if it is possible to write
such test cases here. Thanks!
This PR adds a new table named commit status summary to reduce queries
from the commit status table. After this change, commit status summary
table will be used for the final result, commit status table will be for
details.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
When repo is a mirror, and commit author is an external user, then
`GetUserByEmail` will return error.
reproduce/test:
- mirror Gitea to your instance
- disable action and enable it again, this will trigger
`DetectAndHandleSchedules`
ps: also follow #24706, it only fixed normal runs, not scheduled runs.
As the latest tag of `github.com/denisenkom/go-mssqldb` is in 2022, but
as a fork of it, `github.com/microsoft/go-mssqldb` has more activities
than the original repository. We can convert the driver to the fork.
Since the interface of Go database driver are the same, it should have
no any affect for the end users.
In Wiki pages, short-links created to local Wiki files were always
expanded as regular Wiki Links. In particular, if a link wanted to point
to a file that Gitea doesn't know how to render (e.g, a .zip file), a
user following the link would be silently redirected to the Wiki's home
page.
This change makes short-links* in Wiki pages be expanded to raw wiki
links, so these local wiki files may be accessed without manually
accessing their URL.
* only short-links ending in a file extension that isn't renderable are
affected.
Closes#27121.
Signed-off-by: Rafael Girão <rafael.s.girao@tecnico.ulisboa.pt>
Co-authored-by: silverwind <me@silverwind.io>
Fixes: https://github.com/go-gitea/gitea/issues/29438
This contains numerous enhancements for how large commit messages and
large filenames render. Another notable change is that the file path is
no longer cut off by backend at 30 chars, but rendered in full with
wrapping.
<img width="1329" alt="Screenshot 2024-04-09 at 21 53 57"
src="5ccbb3d6-643a-4f60-ba79-3572b36d5182">
<hr>
<img width="711" alt="Screenshot 2024-04-09 at 21 44 24"
src="6ffe8fbb-407c-4aa7-b591-3d80daea7d57">
<hr>
<img width="439" alt="Screenshot 2024-04-09 at 21 19 03"
src="1ec7f6e9-2fd8-4841-87eb-6ca02ab9cd61">
<hr>
<img width="444" alt="Screenshot 2024-04-09 at 21 18 52"
src="70931b9e-5841-477e-b3bc-98f8d2662964">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Not sure exactly when this regressed, but has been a while I think.
Before:
<img width="895" alt="Screenshot 2024-04-08 at 22 46 50"
src="9b1788f8-017e-4fe1-8ab9-938e0d76fb41">
After:
<img width="689" alt="Screenshot 2024-04-08 at 23 00 58"
src="90193df9-5c24-4a1a-96fe-3d4e8392063c">
Co-authored-by: Giteabot <teabot@gitea.io>
Agit returned result should be from `ProcReceive` hook but not
`PostReceive` hook. Then for all non-agit pull requests, it will not
check the pull requests for every pushing `refs/pull/%d/head`.
Fix#30243
We only checking unit disabled when detecting workflows, but not in
runner `FetchTask`.
So if a workflow was detected when action unit is enabled, but disabled
later, `FetchTask` will still return these detected actions.
Global setting: repo.ENABLED and repository.`DISABLED_REPO_UNITS` will
not effect this.
Fix#29074 (allow to disable all builtin apps) and don't make the doctor
command remove the builtin apps.
By the way, rename refobject and joincond to camel case.
Fixes#30265
1. Read second type of dependencies
2. Render `Description` and `ReleaseNotes`
old:
new:
The NuGet spec does not specify what kind of text can be stored in the
description but we can best guess markdown. The official NuGet registry
just [converts the newlines to html
lines](https://www.nuget.org/packages/rb.Firefox#readme-body-tab).
3. Extract and render the readme. This is the new and better place to
store larger text than in the description. The content is markdown.
---------
Co-authored-by: Benjamin Heemann <benjamin.heemann@raith.de>
1. The previous color contrast calculation function was incorrect at
least for the `#84b6eb` where it output low-contrast white instead of
black. I've rewritten these functions now to accept hex colors and to
match GitHub's calculation and to output pure white/black for maximum
contrast. Before and after:
<img width="94" alt="Screenshot 2024-04-02 at 01 53 46"
src="00b39e15-a377-4458-95cf-ceec74b78228"><img
width="90" alt="Screenshot 2024-04-02 at 01 51 30"
src="1677067a-8d8f-47eb-82c0-76330deeb775">
2. Fix project-related issues:
- Expose the new `ContrastColor` function as template helper and use it
for project cards, replacing the previous JS solution which eliminates a
flash of wrong color on page load.
- Fix a bug where if editing a project title, the counter would get
lost.
- Move `rgbToHex` function to color utils.
@HesterG fyi
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes https://github.com/go-gitea/gitea/issues/30293 and introduce the
`--page-spacing` variable which holds the spacing between the elements
on the page. This is working vertically for all pages, including ones
that have fomantic grid, and horizontally for all that use
`flex-container`.
The `.page-content > :first-child:not(.secondary-nav)` selector uses
margin which in some cases enables to adjacent margins to overlap, which
is nice.
<img width="1320" alt="Screenshot 2024-04-06 at 01 35 19"
src="3e81e707-e9ff-4b7f-a211-3d98f4f85353">
---
<img width="1327" alt="Screenshot 2024-04-06 at 01 35 45"
src="aad196c0-9e21-4c06-ae59-7e33a76c61e1">
---
<img width="1321" alt="Screenshot 2024-04-06 at 01 35 31"
src="785f6c5d-08b6-4e66-aa16-aeca7cfed3ad">
Fix the action issue in https://github.com/go-gitea/gitea/issues/30303,
specifically:
- Use opaque step header hover background to avoid transparency issue
- Un-sticky the `action-view-left` on mobile, it would otherwise overlap
into right view
- Improve commit summary, let it wrap
- Fix and comment z-indexes
- Tweak width for run-list-item-right so it wastes less space on desktop
- Synced latest changes to console colors from dark to light theme
<img width="467" alt="Screenshot 2024-04-06 at 18 58 15"
src="8ad26b72-6cd9-4522-8ad1-6fd86b2d0d53">
Fix the checkbox issues in
https://github.com/go-gitea/gitea/issues/30303 which were existing
problems with these selectors, but made visible with
https://github.com/go-gitea/gitea/pull/30162.
There is a lot of dead/useless CSS in `form.css`, I only fixed the two
problems and remove CSS that was definitely not in use or needed.
<img width="369" alt="Screenshot 2024-04-06 at 18 00 08"
src="720f178b-1b22-48d4-8704-becb8ce66129">
<img width="405" alt="Screenshot 2024-04-06 at 18 00 28"
src="61c0f8ec-34af-46c5-a3fa-7c5c4d30c7d2">
Co-authored-by: Giteabot <teabot@gitea.io>
Fix regression from https://github.com/go-gitea/gitea/pull/30194 where
right-aligned items would not display correctly.
Before and After:
<img width="285" alt="Screenshot 2024-04-06 at 01 12 11"
src="f9168db5-0f69-4b5d-ba17-b60145ac4a09">
<img width="285" alt="Screenshot 2024-04-06 at 01 11 49"
src="639ab6ed-d018-4e3a-9980-1f079e4ebe9d">
Frontpage search tweaked to accommodate (which was the reason for the
changes that broken above):
<img width="445" alt="Screenshot 2024-04-06 at 01 11 34"
src="1919220b-390e-463a-8e3d-33a3556bf111">
<img width="438" alt="Screenshot 2024-04-06 at 01 11 39"
src="fd94f8e4-1d56-4b04-99e3-1cd240bd7ab4">
It doesn't change logic, it only does:
1. Rename the variable and function names
2. Use more consistent format when mentioning config section&key
3. Improve some messages
Likely still some unnecessary CSS but any combinations with the `ui
list` classes are covered. There was only on instance of `horizontal
list` which I removed. It was this part of the commit page:
<img width="396" alt="image"
src="c49ec4f5-93c3-41d6-a907-cdbedf8abc44">
1. Distinguish inline an block code with new CSS variable
`--color-markup-code-inline`
2. Various color tweaks, better contrast from background
<img width="447" alt="Screenshot 2024-04-05 at 00 51 00"
src="93e069f4-6807-4f2c-9331-2d69730919d4">
<img width="456" alt="Screenshot 2024-04-05 at 00 50 44"
src="0dc9c745-c531-40fa-94ec-b0ba10bd7ccf">
This might appear odd but I think it's the right thing to do: On Github,
the "Watch" button always has the open eye icon:
<img width="177" alt="Screenshot 2024-04-05 at 08 26 48"
src="0c1188d1-145b-4c6d-909f-2e1460499941">
<img width="179" alt="Screenshot 2024-04-05 at 08 26 40"
src="e29d91fa-f122-4e10-9589-f79c1d612cf9">
On Gitea, while watching, the icon is this and this sometimes confuses
me slightly, being used to above:
<img width="158" alt="Screenshot 2024-04-05 at 08 29 08"
src="3301021b-744e-409f-a9d8-887ec2772fdc">
After this PR, both states will use the same icon:
<img width="145" alt="Screenshot 2024-04-05 at 08 26 27"
src="8addfa5b-c009-4bdb-bfa1-4f3dfaffa4cd">
<img width="161" alt="Screenshot 2024-04-05 at 08 26 33"
src="cef383e6-2cc0-460f-a4d3-83ebb321debe">
Result of `go get -u golang.org/x/net; make tidy`.
This is related to the following vulncheck warning:
```
There are 2 vulnerabilities in modules that you require that are
neither imported nor called. You may not need to take any action.
See https://pkg.go.dev/golang.org/x/vuln/cmd/govulncheck for details.
Vulnerability #1: GO-2024-2687
HTTP/2 CONTINUATION flood in net/http
More info: https://pkg.go.dev/vuln/GO-2024-2687
Module: golang.org/x/net
Found in: golang.org/x/net@v0.22.0
Fixed in: golang.org/x/net@v0.23.0
Vulnerability #2: GO-2022-0470
No access control in github.com/blevesearch/bleve and bleve/v2
More info: https://pkg.go.dev/vuln/GO-2022-0470
Module: github.com/blevesearch/bleve/v2
Found in: github.com/blevesearch/bleve/v2@v2.3.10
Fixed in: N/A
```
As in commits page we show the author of the commit in the commits
dropdown and not the committer.
Commits Page:
and the same contents in our dropdown:
fixes#29588
This allows you to hide the "Powered by" text in footer via
`SHOW_FOOTER_POWERED_BY` flag in configuration.
---------
Co-authored-by: silverwind <me@silverwind.io>
Found [a better color
picker](https://github.com/web-padawan/vanilla-colorful) that [does not
rely](https://github.com/mdbassit/Coloris/issues/139) on
`querySelectorAll` or a global shared instance, and is also around a
third of the size of the previous one.
The popover is handled by tippy.js for which I introduced a new "bare"
theme and it uses a new sibling-based mechanism which should prove
useful later to create tippy popovers via HTML only.
<img width="846" alt="Screenshot 2024-03-31 at 04 03 38"
src="7639b911-a2d7-4f5c-bffd-a9d84561e747">
Major changes:
* Move some functions like "addReader" / "isSubDir" /
"addRecursiveExclude" to a separate package, and add tests
* Clarify the filename&dump type logic and add tests
* Clarify the logger behavior and remove FIXME comments
Co-authored-by: Giteabot <teabot@gitea.io>
This fixes a minor issue in the documentation for SSH Container
Passthrough for non-rootless installs. The non-rootless Dockerfile and
docker-compose do not set `USER`/`user` instructions so `docker exec`
will run as root by default. While running as root, gitea commands will
refuse to execute, breaking these approaches. For containers built with
the rootless instructions, `docker exec` will run as git by default so
this is not necessary in that case.
This issue was already discussed in #19065, but it does not appear this
part of the issue was ever added to the documentation.
- Inline math blocks couldn't be preceeded or succeeded by
alphanumerical characters due to changes introduced in PR #21171.
Removed the condition that caused this (precedingCharacter condition)
and added a new exit condition of the for-loop that checks if a specific
'$' was escaped using '\' so that the math expression can be rendered as
intended.
- Additionally this PR fixes another bug where math blocks of the type
'$xyz$abc$' where the dollar sign was not escaped by the user, generated
an error (shown in the screenshots below)
- Altered the tests to accomodate for the changes
Former behaviour (from try.gitea.io):
Fixed behaviour (from my local build):
(Edit) Source code for the README.md file:
```
$x$ -$x$ $x$-
a$xa$ $xa$a 1$xb$ $xb$1
$a a$b b$
a$b $a a$b b$
$a a\$b b$
```
---------
Signed-off-by: João Tiago <joao.leal.tintas@tecnico.ulisboa.pt>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#30235
If the key id "front" byte has a single digit, `%X` is missing the 0
prefix.
` 38D1A3EADDBEA9C` instead of
`038D1A3EADDBEA9C`
When using the `IssuerFingerprint` slice `%X` is enough but I changed it
to `%016X` too to be consistent.
Create a new `issue-navbar` class specifically for this bar, previous
class used in many places and I thought I had them all removed, but not
this one.
Fixes: https://github.com/go-gitea/gitea/issues/30226
To make it more flexible and support SSH signature.
The existing tests are not changed, there are also tests covering
`parseTagRef` which also calls `parsePayloadSignature` now. Add some new
tests to `Test_parseTagData`
1. check `IsActive` before calling `IsLastAdminUser`.
2. Fix some comments and error messages.
3. Don't `return err` if "removing file" fails in `DeleteUser`.
4. Remove incorrect `DeleteInactiveEmailAddresses`. Active users could
also have inactive emails, and inactive emails do not support
"olderThan"
5. Add tests
On the labels list, This `left` class caused the dropdown content to
flash on page load until JS had hidden it. Remove it as I see no purpose
to it.
<img width="215" alt="image"
src="9e1de97f-dd89-41e0-9229-5c4a786ba762">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Remove this label, I find it barely useful and we already have more
useful labels like `modifies/js`. Backport so that we can eventually
delete that label.
Co-authored-by: Giteabot <teabot@gitea.io>
When reviewing PRs, some color names might be mentioned, the
`transformCodeSpan` (which calls `css.ColorHandler`) considered it as a
valid color, but actually it shouldn't be rendered as a color codespan.
Fix https://github.com/go-gitea/gitea/issues/30185, regression from
https://github.com/go-gitea/gitea/pull/30162.
The checkboxes were unclickable because the label was positioned over
the checkbox with `padding`. Now it uses `margin` so the checkbox itself
will be clickable in all cases.
Secondly, I changed the for/id linking to also add missing `for`
attributes when `id` is present. The other way around (only `for`
present) is currently not handled and I think there are likey no
occurences in the code and introducing new non-generated `id`s might
cause problems elsewhere if we do, so I skipped on that.
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the issue author dropdown functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the comment edit history functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the repository branch settings functionality and it works as
before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Switch from the old self-built action to the official one.
We get:
- config managed inside the repo
- automatic upload when source file changes
- automatic invalidation if source string changes (tested)
- automatic download of new translation files
Tested both upload and download.
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the edit column modal functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery class functions to plain JavaScript
- Tested the comment context menu functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes#30119
Include the encoding in the signature payload.
before
after
Add
[`stylelint-value-no-unknown-custom-properties`](https://github.com/csstools/stylelint-value-no-unknown-custom-properties)
which lints for undefined CSS variables. No current violations.
To make it work properly with editor integrations, I had to convert the
config to JS to be able to pass absolute paths to the plugin, but this
is a needed change anyways.
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the commit button disabled toggling functionality and it works
as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the diff view functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the notification count and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the code range selection functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
## Changes
- Adds setting `EXTERNAL_USER_DISABLE_FEATURES` to disable any supported
user features when login type is not plain
- In general, this is necessary for SSO implementations to avoid
inconsistencies between the external account management and the linked
account
- Adds helper functions to encourage correct use
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the image diff and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
CSS is pretty slim already and the `.ui.toggle.checkbox` sliders on
admin page also still work. The only necessary JS is the one that links
`input` and `label` so that it can be toggled via label. All checkboxes
except the markdown ones render at `--checkbox-size: 16px` now.
<img width="174" alt="Screenshot 2024-03-28 at 22 15 10"
src="3455c1bb-166b-47e4-9847-2d20dd1f04db">
<img width="499" alt="Screenshot 2024-03-28 at 21 00 07"
src="412be2b3-d5a0-478a-b17b-43e6bc12e8ce">
<img width="83" alt="Screenshot 2024-03-28 at 22 14 34"
src="d8c89838-a420-4723-8c49-89405bb39474">
---------
Co-authored-by: delvh <dev.lh@web.de>
Get rid of one more jQuery dependant and have a nicer color picker as
well.
Now there is only a single global color picker init because that is all
that's necessary because the elements are present on the page when the
init code runs. The init is slightly weird because the module only takes
a selector instead of DOM elements directly.
The label modals now also perform form validation because previously it
was possible to trigger a 500 error `Color cannot be empty.` by clearing
out the color value on labels.
<img width="867" alt="Screenshot 2024-03-25 at 00 21 05"
src="71215c39-abb1-4881-b5c1-9954b4a89adb">
<img width="860" alt="Screenshot 2024-03-25 at 00 20 48"
src="a12cb68f-c38b-4433-ba05-53bbb4b1023e">
Fix#20446
This PR will fix the username in:
repo home page
repo commit list page
repo commit graph page
pr commit page
Will not fix:
wiki revisions page:
ps: the author name is `FullName` by default
Fix https://github.com/go-gitea/gitea/pull/29874#discussion_r1542227686
- The migration of v292 will miss many projects. These projects will
have no default board. This PR introduced a new migration number and
removed v292 migration.
- This PR also added the missed transactions on project-related
operations.
- Only `SetDefaultBoard` will remove duplicated defaults but not in
`GetDefaultBoard`
Resolves#29965.
---
Manually tested this by:
- Following the
[installation](https://docs.gitea.com/next/installation/install-with-docker#basics)
guide (but built a local Docker image instead)
- Creating 2 users, one who is the `Owner` of a newly-created repository
and the other a `Collaborator`
- Had the `Collaborator` create a PR that the `Owner` reviews
- `Collaborator` resolves conversation and `Owner` merges PR
And with this change we see that we can no longer see re-request review
button for the `Owner`:
<img width="1351" alt="Screenshot 2024-03-25 at 12 39 18 AM"
src="bcd9c579-3cf7-474f-a51e-b436fe1a39a4">
Enable us to use tailwind's
[`font-family`](https://tailwindcss.com/docs/font-family) classes as
well as remove `gt-mono` in favor of `tw-font-mono`. I also merged the
"compensation" to one selector, previously this was two different values
0.9em and 0.95em. I did not declare a `serif` font because I don't think
there will ever be a use case for those. Command ran:
```sh
perl -p -i -e 's#gt-mono#tw-font-mono#g' web_src/js/**/* templates/**/*
This PR replaces the use of `max( id )`, and instead using ``max(
`index` )`` for determining the latest commit status. Building business
logic over an `auto_increment` primary key like `id` is risky and
there’re already plenty of discussions on the Internet.
There‘s no guarantee for `auto_increment` values to be monotonic,
especially upon failures or with a cluster. In the specific case, we met
the problem of commit statuses being outdated when using TiDB as the
database. As [being
documented](https://docs.pingcap.com/tidb/stable/auto-increment),
`auto_increment` values assigned to an `insert` statement will only be
monotonic on a per server (node) basis.
Closes#30074.
Previously, the default was a week.
As most instances don't set the setting, this leads to a bad user
experience by default.
## ⚠️ Breaking
If your instance requires a high level of security,
you may want to set `[security].LOGIN_REMEMBER_DAYS` so that logins are
not valid as long.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
1. Add "grabbing" cursor while dragging items:
2. Make project board only drag via their header, not via their whole
body.
3. Fix some cursor problems in projects
4. Move shared options into `createSortable`.
On creation of an empty project (no template) a default board will be
created instead of falling back to the uneditable pseudo-board.
Every project now has to have exactly one default boards. As a
consequence, you cannot unset a board as default, instead you have to
set another board as default. Existing projects will be modified using a
cron job, additionally this check will run every midnight by default.
Deleting the default board is not allowed, you have to set another board
as default to do it.
Fixes#29873Fixes#14679 along the way
Fixes#29853
Co-authored-by: delvh <dev.lh@web.de>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the new authentication source form and the deletion of system
notices. They work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the reaction selector and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the dropdowns and they work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested most of the functions and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched to plain JavaScript
- Tested the create/rename branch modals' functionality and they work as
before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Of note is the CSS has references to "floating label" and "transparent
label" but I could not find those anywhere in the code. They are related
to https://github.com/go-gitea/gitea/pull/3939, but I think these have
long been removed.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Resolve#23848
This PR put an edit file button on pull request files to allow a quick
edit for a file. After the edit finished, it will return back to the
viewed file position on pull request files tab.
It also use a branch view file link instead of commit link when it's a
non-commit pull request files view.
<img width="1532" alt="image"
src="3637ca4c-89d5-4621-847b-79702a44f617">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched from jQuery `attr` to plain javascript `setAttribute`
- Tested the modals and they work as before
---------
Co-authored-by: silverwind <me@silverwind.io>
- Switched from jQuery `attr` to plain javascript `getAttribute`
- Tested the code comments and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
There's no need to initialize a jQuery object with a CSS selector when
we can pass the CSS selector directly.
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested most of the functions and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Fixes https://github.com/go-gitea/gitea/issues/30082.
Adds a new linter that searches for non-existant SVG images in
templates. Output before the fix was:
```
$ make lint-templates
SVG "octicon-warning" not found, used in templates/devtest/flex-list.tmpl
SVG "octicon-warning" not found, used in templates/devtest/flex-list.tmpl
SVG "octicon-markup" not found, used in templates/repo/diff/comment_form.tmpl
make: *** [Makefile:438: lint-templates] Error 1
```
<img width="306" alt="Screenshot 2024-03-25 at 23 31 05"
src="1052d1a9-bfec-4d5a-9cae-f895f78f7c93">
Fix regression from https://github.com/go-gitea/gitea/pull/30047.
Apparently tables have certain user-agent styles that center inside
`<th>` etc. Restored the original fomantic rules for these.
Before:
<img width="1332" alt="Screenshot 2024-03-25 at 21 59 33"
src="e06a5509-b505-4752-9b6e-91d5ed49f61d">
After:
<img width="1330" alt="Screenshot 2024-03-25 at 21 59 40"
src="6444817f-dd61-4a1e-a8b3-959c2780148d">
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the code line range selection and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Before:
After:
If repo is a mirror, external user's name will be white, but if user is
existed, then you will see blue names and white names together:
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix regression from https://github.com/go-gitea/gitea/pull/30033
These buttons had lost their border because `.ui.header` sets `none` but
`.ui.menu` has it, after the migration, the order of styles changed and
header won. I see no reason why those have the `header` class in first
place, besides for semantic meaning.
Before:
<img width="491" alt="Screenshot 2024-03-25 at 00 39 27"
src="fa1b7505-75cf-4854-a97f-db3c46f31e93">
After:
<img width="496" alt="Screenshot 2024-03-25 at 00 39 14"
src="8f6bdc07-9596-436b-8c82-9af283300004">
Help #29999, or its tests cannot pass.
Also, add some comments to clarify the usage of `TxContext`.
I don't check all usages of `TxContext` because there are too many
(almost 140+). It's a better idea to replace them with `WithTx` instead
of checking them one by one. However, that may be another refactoring
PR.
- Switched from jQuery `attr` to plain javascript `getAttribute`
- Tested the reaction selector and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the markdown editor and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `attr` to plain javascript `getAttribute`
- Tested the label edit exclusive checkbox and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the repository topic bar. It works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
This PR uses `db.ListOptions` instead of `Paginor` to make the code
simpler.
And it also fixed the performance problem when viewing /pulls or
/issues. Before the counting in fact will also do the search.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: silverwind <me@silverwind.io>
We have to define this one in helpers.css because tailwind only
generates a single class but certain things rely on this being
double-class. Command ran:
```sh
perl -p -i -e 's#gt-hidden#tw-hidden#g' web_src/js/**/* templates/**/* models/**/* web_src/css/**/*
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
By using git's ability, end users (especially small instance users) do
not need to enable the indexer, they could also benefit from the code
searching feature.
Fix#29996
---------
Co-authored-by: silverwind <me@silverwind.io>
Small CSS module. There was a ordering conflict between `.ui.menu` and
`.ui.container` which I've solved by adding the `.ui.menu` rule into
base.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This hides the chevron icon and makes the step header unclickable for
skipped steps because there is no content to expand on those.
Before:
<img width="272" alt="Screenshot 2024-03-21 at 20 06 47"
src="9bb328d1-6f74-48a9-af19-de9b351e3707">
After:
<img width="295" alt="Screenshot 2024-03-21 at 20 03 07"
src="72a26e14-5a28-4606-8c3c-184b405872c8">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Likely still a few useless classes left, but I think I at least don't
have missed any.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
1. Restore missing styles for message close icon
2. Move `code-line-button` so that it does not go off-screen on small
viewports
3. Make `code-line-button` look and behave like other buttons
4. Make `code-line-button` work in blame
5. Make the active selection span the whole line, not just the code part
6. Tweak colors, make dark theme code bg darker, make line numbers same
color in diff and file view.
7. Move code background to parent, fixing border radius and other
problems
8. Enable code wrap in blame
9. Improve blame responsiveness
10. Remove `--color-code-sidebar-bg` in blame, now it uses same
background as code
11. Rename `--color-active-line` to `--color-highlight-bg`
12. Add `--color-highlight-bg`
13. Fix button group borders on hover and border-right on last button.
<img width="1343" alt="Screenshot 2024-03-23 at 22 34 13"
src="fcbb919f-5dc3-43f0-97f6-870d6f412554">
<img width="1334" alt="Screenshot 2024-03-23 at 22 34 26"
src="ca44c3b7-4328-4645-ba49-b0dc6a5ac06d">
<img width="1338" alt="Screenshot 2024-03-23 at 22 34 57"
src="00eb0b5a-1ec7-4669-a94a-4602b9d1c1ac">
<img width="1337" alt="Screenshot 2024-03-23 at 22 34 42"
src="752edc4a-064f-413c-9dff-c086187fcd85">
Fixes: https://github.com/go-gitea/gitea/issues/18074
The linter missed these because they were set on a object. Tested and I
also renamed those properties to add `$` indicating a jQuery selection.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds `setting.Service.DefaultOrgMemberVisible` value to dataset
of user when the initial org creator is being added to the created org.
Fixes#30012.
- Switched from jQuery `.attr` to plain javascript `getAttribute`
- Tested the show/hide modal buttons, they work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Migrate `gt-font-*` to `tw-text-*` All tailwind-original class names are
also available and render like they would with 16px root font size.
We currently have root font size at 14px, but I would like to eventually
migrate us to 16px so that the tailwind docs apply to us unchangend and
because 16px is the recommended root font size for web pages in general.
Also the number 16 is much better dividable than 14 so will result in
more integers.
- Switched to plain JavaScript
- Tested the "go to" button functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the review box counter and Previous/Next code review
conversation buttons. They work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched from jQuery `.attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the collaborator access mode change, team search box, and
branch protection form. They all work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fixes: https://github.com/go-gitea/gitea/issues/29981. Introduce
`.secondary-nav` as a universal way for styling and margin adjustments
inside `.page-content`.
If the first child of `.page-content` is `.secondary-nav`, we add margin
below it, otherwise we add padding to the first child. Notable changes:
- `--color-header-wrapper` is replaced with `--color-secondary-nav-bg`.
- `navbar` class is removed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Switched from jQuery `.attr` to plain javascript `.setAttribute`
- Tested the cherry-pick from the branch/tag selector and it works as
before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched to plain JavaScript
- Tested the citation modal functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched from jQuery `.attr` to plain javascript `.getAttribute`
- Tested the issue movement between columns, column background color
setting, and column deletion. It all works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes https://github.com/go-gitea/gitea/issues/30005. Regression from
https://github.com/go-gitea/gitea/pull/29945.
There was only once instance of `tw-content-center` before that PR, so I
just ran below command and reverted that one instance.
```sh
perl -p -i -e 's#tw-content-center#tw-items-center#g' web_src/js/**/* templates/**/* models/**/* tests/**/*
```
Before
<img width="1312" alt="image"
src="26a6dec2-9fea-4c0c-b6fb-290eab12a55a">
After
<img width="1298" alt="image"
src="01f7a714-eae9-4729-918f-3b4795094d0b">
Some minor refactors, remove unnecessary `:is` selector and move the
`:target` check out of the function. Might as well backport for the rare
browser that does not support `:is`.
Had to fiddle a bit with the css ordering, but seems to work well now
and should render exactly like before. Some of the CSS may be
unnecessary, but I kept it for now.
Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
1. Use general "mobile-only" and "not-mobile" CSS styles, remove some`@media (max-width: 767.98px)` tricks
2. Use `CountFmt` for repo list, just like the repo header (and it matches GitHub, to avoid big numbers bloat the page)
Various code was using fomantic `loading` class which I think got broken
a while ago and rendered only a full circle. Fix those to use
`is-loading`.
Before:
<img width="295" alt="Screenshot 2024-03-19 at 22 56 26"
src="dbe83395-5db4-4868-90bc-3613866a35f0">
After:
<img width="60" alt="Screenshot 2024-03-19 at 22 54 35"
src="8ac19b7e-035a-4c6d-850b-53a234ef69c2">
<img width="294" alt="Screenshot 2024-03-19 at 22 54 56"
src="34e819d7-25f7-43a1-9d48-4a68dcd2b6ad">
<img width="320" alt="Screenshot 2024-03-19 at 22 55 16"
src="05127544-47ff-4e18-9fd8-c84e44c374f8">
<img width="153" alt="Screenshot 2024-03-19 at 23 01 43"
src="a33248c6-b11d-40ff-82d8-f5a3d85b55aa">
<img width="1300" alt="Screenshot 2024-03-19 at 23 56 25"
src="562ca876-b5d5-4295-961e-9d2cdab31ab0">
<img width="136" alt="Screenshot 2024-03-20 at 00 00 38"
src="44838ac4-67f3-4fec-a8e3-978cc5dbdb72">
Use `happy-dom` again in vitest as it has caught up recently to `jsdom`
in terms of features and it is a much more lightweight solution.
I encountered [one
bug](https://github.com/capricorn86/happy-dom/issues/1342), but it's an
easy workaround until fixed.
I regenerated the lockfile to get rid of the transitive dependencies so
that's why the diff also has some upgrades in it.
In total, this change removes 39 npm dependencies.
This PR will avoid load pullrequest.Issue twice in pull request list
page. It will reduce x times database queries for those WIP pull
requests.
Partially fix#29585
---------
Co-authored-by: Giteabot <teabot@gitea.io>
**After deleting the review and refreshing, the display is normal.
However, Without refreshing, the interface will be broken**
f5cb19a6-eb26-47b0-b8ee-15b575bbe1ac
**after**
aa65922c-2ebf-4fce-ad91-35661f70329a
Fixes: https://github.com/go-gitea/gitea/issues/29956. This error
exposed a existing bug in the code, it was just never noticed because
the jQuery expression evaluated without error before while the new one
doesn't.
Also improves error message styles:
Before:
<img width="1338" alt="Screenshot 2024-03-21 at 09 16 07"
src="1cc1ef89-ad94-491e-bbca-75387f7547a0">
After:
<img width="1335" alt="Screenshot 2024-03-21 at 09 15 44"
src="312efc79-5353-4e2a-a703-1bccd3c01736">
This PR fixed a bug when the user switching pages too fast, he will
logout automatically.
The reason is that when the error is context cancelled, the previous
code think user hasn't login then the session will be deleted. Now it
will return the errors but not think it's not login.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Exclude this and reformat the toml option to multiline.
I wasn't able to get `exclude_regex` to work so it would include a
`tests` directory anywhere. I think that option only works on files.
Minor color tweaks:
- Better text contrasts
- Better distinguish nav and header wrapper in light theme
- Input boxes are now white on light theme
- Slightly darker dark theme background
<img width="503" alt="Screenshot 2024-03-20 at 19 31 54"
src="c7802a84-2386-4332-bd91-f419473ff644">
<img width="510" alt="Screenshot 2024-03-20 at 19 32 24"
src="21d3529e-6e0a-413a-9e9e-a03bea2405eb">
Two small CSS fixes:
1. Add background and reduced padding/avatar size to dashboard navbar.
We use that background already in a number of "secondary navbars", so it
fits.
<img width="1344" alt="Screenshot 2024-03-20 at 18 18 21"
src="ce5ebedc-e607-42c7-b7b4-b7a4c0ee68f2">
2. Fix padding on top of user settings and subscriptions, regressed by
https://github.com/go-gitea/gitea/pull/29922.
There is a small layout shift in when active tab changes. Notice how the
actions SVG is unstable:
This is because the active item with bold text is wider then the
inactive one. I have applied [this
trick](https://stackoverflow.com/a/32570813/808699) to prevent this
layout shift. It's only active inside `<overflow-menu>` because I wanted
to avoid changing HTML and doing it in regular JS would cause a flicker.
I don't expect us to introduce other similar menus without
`<overflow-menu>`, so that place is likely fine.
I also changed the weight from 500 to 600, slightly reduced horizontal
padding, merged some tab-bar related CSS rules and a added a small
margin below repo-header so it does not look so crammed against the
buttons on top.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The negative margin was suboptimal and presents a few unnecessary
challenges while styling the page. Remove it and add custom margin
values, which slightly changes the height a few things near the top of
the page as well:
15px less height of explore and login navbar:
<img width="899" alt="Screenshot 2024-03-20 at 00 52 34"
src="72a01ca4-5d17-4a0f-b915-61f95054fcb1">
15px reduced padding-top height of "user bar" and equal 4px padding
added:
<img width="484" alt="Screenshot 2024-03-20 at 00 52 50"
src="a8507e6d-372d-4a8b-9048-66fcf8a5facd">
3px less padding on top of repo:
<img width="552" alt="Screenshot 2024-03-20 at 00 53 49"
src="dede6e44-7688-440f-a1b6-13532638ae03">
The post step was always waiting, even if all steps were done. Then,
once the task was done, the post step became success immediately.
Before:
<img width="915" alt="xnip_240320_120228"
src="00347430-f998-4c43-917a-bf6dd6d0e333">
After:
<img width="905" alt="xnip_240320_120443"
src="a419b111-17c2-4029-a022-c761cc419091">
Regression of #29493. If a branch has been deleted, repushing it won't
restore it.
Lunny may have noticed that, but I didn't delve into the comment then
overlooked it:
https://github.com/go-gitea/gitea/pull/29493#discussion_r1509046867
The additional comments added are to explain the issue I found during
testing, which are unrelated to the fixes.
- Switched from jQuery `.attr` to plain javascript `.getAttribute`
- Tested the user search box and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `.getAttribute`
- Tested the archive download and compare page branch selector
functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `.setAttribute`
- Tested the image diff functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `.getAttribute`
- Tested the quick pull request button text change functionality and it
works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched from jQuery `.attr` to plain javascript `.getAttribute`
- Tested the issue author dropdown functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Tested all functionality. There is a [pre-existing
bug](https://github.com/go-gitea/gitea/issues/29853) when moving a
project panels which is not caused by this refactoring.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#29731
Caused by #24634
Also remove fixme.
ps: we can not fix the existed runs, as wrong refs are all recorded in
DB, and we can not know whether they are branch or tag:
The error message:
`editor.file_changed_while_editing = The file contents have changed
since you started editing. <a target="_blank" rel="noopener noreferrer"
href="%s">Click here</a> to see them or <strong>Commit Changes
again</strong> to overwrite them.`
Is re-used in inappropriate contexts. The link in the key goes to a 404
when the key is used in a situation where the file contents have not
changed.
Added two new keys to differentiate commit id mismatch and push out of
date conditions.
- Move some scripts from `build` to new `tools` dir. Eventually i would
like to move all but let's do it step-by-step.
- Add dir to eslint and move the files into vars.
- Update docs accordingly.
- While updating docs I noticed we were incorrectly having `public/img`
path still in a few places. Replace those with the current
`public/assets/img`.
---------
Co-authored-by: Nanguan Lin <nanguanlin6@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
When logged out, the checkboxes are not there on the issue/pr lists,
which would cause an error here.
Fixes: https://github.com/go-gitea/gitea/issues/29862
---------
Co-authored-by: delvh <dev.lh@web.de>
1. The borders were doubled on the "empty" page, fix it.
2. Remove unnecessary CSS classes like "clone", "compact", etc
3. Use CSS class "clone-panel" instead of ID "clone-panel"
4. Use `tw-flex-1` instead of `gt-f1`
5. Remove unnecessary ID "more-btn"
Came to the conclusion that a simple format Readme is easier to read
than the previous fancy centered stuff.
---------
Co-authored-by: Yarden Shoham <git@yardenshoham.com>
Previously, the citation js would load every time when opening a citable
repo. Now it only loads when the user clicks the button for it. The
loading state is representend with a spinner on the button:
<img width="83" alt="Screenshot 2024-03-17 at 00 25 13"
src="29649089-13f3-4974-ab81-e12c0f8e651f">
Diff ist best viewed with whitespace hidden.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#20175
Current implementation of API does not allow creating pull requests
between branches of the same
repo when you specify *namespace* (owner of the repo) in `head` field in
http request body.
---
Although GitHub implementation of API allows performing such action and
since Gitea targeting
compatibility with GitHub API I see it as an appropriate change.
I'm proposing a fix to the described problem and test case which covers
this logic.
My use-case just in case:
https://github.com/go-gitea/gitea/issues/20175#issuecomment-1711283022
The issue checkbox code received a few more cleanups and I specifically
tested it. The other changes are trivial. Also, I checked the cases for
how many elements match the jQuery selection to determine querySelector
vs. querySelectorAll.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
When read the code: `pager.AddParam(ctx, "search", "search")`, the
question always comes: What is it doing? Where is the value from? Why
"search" / "search" ?
Now it is clear: `pager.AddParamIfExist("search", ctx.Data["search"])`
Please use the fetch wrapper instead, or even better `htmx`.
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <6543@obermui.de>
- Removed 2 jQuery AJAX calls and replaced with our fetch wrapper
- Deleted an AJAX call that wasn't attached to any element since #24989
- Tested the notification count and notification table functionality and
it works as before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Same as https://github.com/go-gitea/gitea/pull/29822 but for light
theme. Slight shift towards blue and made the themes match more, like on
header and footer background.
Before
<img width="1342" alt="Screenshot 2024-03-16 at 00 43 03"
src="b46021a1-241c-446a-b220-ca25cc90f3bf">
After
<img width="1343" alt="Screenshot 2024-03-16 at 00 45 21"
src="1c898875-a6bb-4bd3-b059-f82e1a145c99">
Before
<img width="1018" alt="Screenshot 2024-03-16 at 00 43 13"
src="d237ee7d-b4cc-4688-a074-1e96515ac475">
After
<img width="1022" alt="Screenshot 2024-03-16 at 00 43 50"
src="89b1da77-6bc9-4b38-9688-546e794aadfa">
Removed all jQuery AJAX calls and replaced with our fetch wrapper.
Tested the following functionalities and they work as before:
- column creation
- column deletion
- issue movement between columns
- column reordering
- column edit
- default column changing
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Also added BSD Zero Clause License to the list of allowed licenses in
webpack.
Tested various `htmx` operations. Nothing broke.
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the file addition and removal functionality and it works as
before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
1. Introduce a special "flex-items-block" for menu items, to align the
dropdown menu items
2. Simplify the "repo search" form
3. Add missing "TopicOnly" search option
Screenshots:
The old UI items don't align:
<details>
</details>
New UI (doesn't change much, but the items align)
<details>
</details>
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#29763
This PR fixes 2 problems with CodeOwner in the pull request.
- Don't use the pull request base branch but merge-base as a diff base to
detect the code owner.
- CodeOwner detection in fork repositories will be disabled because
almost all the fork repositories will not change CODEOWNERS files but it
should not be used on fork repositories' pull requests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The modal was broken in two ways:
- On small screens, the input box was partially hanging outside the
modal. Fixed with flexbox and increased modal width.
- The clipboard copy was not working because the modal had both
`data-clipboard-text` and `data-clipboard-target`, while we only support
one of those. Made a small tweak in clipboard as well so that it will
still fall back to target if text is empty.
1. Add `<overflow-menu>` web component
2. Rename `<gitea-origin-url>` to `<origin-url>` and make filenames
match.
<img width="439" alt="image"
src="2fbe4ca4-110b-4ad2-8e17-c1e116ccbd74">
<img width="444" alt="Screenshot 2024-03-02 at 21 36 52"
src="aa8f786e-dc8c-4030-b12d-7cfb74bdfd6e">
<img width="537" alt="Screenshot 2024-03-03 at 03 05 06"
src="fddd50aa-adf1-4b4b-bd7f-caf30c7b2245">
TODO:
- [x] Check if removal of `requestAnimationFrame` is possible to avoid
flash of content. Likely needs a `MutationObserver`.
- [x] Hide tippy when button is removed from DOM.
- [x] ~~Implement right-aligned items
(https://github.com/go-gitea/gitea/pull/28976)~~. Not going to do it.
- [x] Clean up CSS so base element has no background and add background
via tailwind instead.
- [x] Use it for org and user page.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Unify all but a few search boxes to use uniform style, uniform
translations and shared templates where possible.
Remove a few duplicated search templates, e. g. code search.
<details><summary>Example after screenshots:</summary>
</details>
Also includes #29700
Co-authored-by: 6543 <6543@obermui.de>
---------
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the review conversation comment, resolve, unresolve, show more
files, and load diff functionality and it works as before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Removed all jQuery AJAX calls and replaced with our fetch wrapper.
Tested the following functionalities and they work as before:
- due-date update
- comment deletion
- branch update by merge or rebase
- allow edits from maintainers button
- reviewer addition or deletion
- WIP toggle button
- new diff code comment button
- issue title edit button
# Demo using `fetch` instead of jQuery AJAX
## Updating the due-date of an issue
## Deleting a comment
## Updating a branch in a pull request
## Checking and unchecking the "Allow edits from maintainers" checkbox
## Requesting review and removing review request
## Toggling the WIP status of a pull request
## Clicking the new code comment button on the diff page
## Editing the issue title and target branch
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Currently, if you implement native CSS nesting within a Vue component a
warning will appear in the terminal. It states
`Nested CSS was detected, but CSS nesting has not been configured
correctly.
Please enable a CSS nesting plugin *before* Tailwind in your
configuration.` To fix this error we need to enable the built-in
[tailwinds nesting
config](https://tailwindcss.com/docs/using-with-preprocessors#nesting).
Example code to trigger the warning within a vue component:
```CSS
<style>
.example {
&:hover,
&:focus-visible {
color: var(--color-text);
}
& svg {
margin-right: 0.78rem;
}
}
</style>
```
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
It is convenient to skip by setting environment, since it's OK
to use root user in job containers.
It's not a bug, but I want to backport it to v1.21 since it doesn't
break anything.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Caused by: #23106
Fix:
2264033569
1. Delete `UserBadgeList` in `options.go`, because it wasn't used. (The
struct defined in `options.go` is the struct used to parse the request
body)
2. Move `BadgeList` struct under `routers/api/v1/swagger` folder which
response should be defined in.
Add some space when the left side items are sticky due to scrolling the
right side.
<img width="419" alt="image"
src="292e1b03-a071-4744-bb79-e50d109056c8">
Updated to actions/labeler@v5
Updated labeler config accordingly, also improved the config and added
more labels.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
the issue is, that you can not distinguish between normal and archived
labels.
So this will make archived labels 80% **grayscale**. And prepend
"Archived: " to the tooltip info
---
*Sponsored by Kithara Software GmbH*
---------
Co-authored-by: delvh <dev.lh@web.de>
This PR do some performance optimzations.
- [x] Add `index` for the column `comment_id` of `Attachment` table to
accelerate query from the database.
- [x] Remove unnecessary database queries when viewing issues. Before
some conditions which id = 0 will be sent to the database
- [x] Remove duplicated load posters
- [x] Batch loading attachements, isread of comments on viewing issue
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
This PR do some loading speed optimization for feeds user interface
pages.
- Load action users batchly but not one by one.
- Load action repositories batchly but not one by one.
- Load action's Repo Owners batchly but not one by one.
- Load action's possible issues batchly but not one by one.
- Load action's possible comments batchly but not one by one.
- Replaced a single jQuery AJAX instance with our fetch wrapper
- Tested the issue branch reference selection and it works as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Most time, when invoking `git.OpenRepository`, `objectFormat` will not
be used, so it's a waste to invoke commandline to get the object format.
This PR make it a lazy operation, only invoke that when necessary.
Fix#28735
GitHub render `\```math\``` ` as a block now.
Add `display` class will render it as a block.
After:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the comment edit history list, diff, and delete functionality
and it works as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
The internal links to other files in the repository were not rendering
with the Src Prefix (/src/branch-name/file-path). This commit fixes that
by using the `SrcLink` as base if available.
Resolves#29668
Previously it was only partially styled, e.g. there was black text on
white background even in dark theme caused by fomantic styles.
<img width="195" alt="image"
src="bc5cf516-2aef-45c3-854a-c9f5497aacca">
<img width="195" alt="Screenshot 2024-03-09 at 02 09 29"
src="ef0af17d-6e0b-402e-b24d-bfa34dc2f4e0">
Co-authored-by: Giteabot <teabot@gitea.io>
We need to scan `.go` files for tailwind classes. Does not seem to
affect build time much luckily.
Fixes:
https://github.com/go-gitea/gitea/pull/29678#discussion_r1518448600
Verified via `rg tw-object-contain public/assets/css/index.css`.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Support pasting URLs over selection text in the textarea editor. Does
not work in EasyMDE and I don't intend to support it. Image paste works
as usual in both Textarea and EasyMDE.
The new `replaceTextareaSelection` function changes textarea content via
[`insertText`](https://developer.mozilla.org/en-US/docs/Web/API/Document/execCommand#using_inserttext)
command, which preserves history, e.g. `CTRL-Z` works and is also
demostrated below. We should later refactor the image paste code to use
the same function because it currently destroys history.
Overriding the formatting via `Shift` key is supported as well, e.g.
`Ctrl+Shift+V` will insert the URL as-is, like on GitHub.
The default version is 3.9.2, which is not supported by poetry.
---------
Co-authored-by: silverwind <me@silverwind.io>
The branch page for blender project will take 6s because calculating
divergence is very slow.
This PR will add a cache for the branch divergence calculation. So when
the second visit the branch list, it will take only less 200ms.
This seeks to fix the bug reported on issue #29196.
Cause:
ID's with custom characters (- , _ , etc.), were not linking correctly
in the Markdown file when rendered in the browser because the ID in the
respective destinies would be different than the one in anchor, while
for IDs with only letters, the ID would be the same.
Fix:
It was suggested that to fix this bug, it should more or less like
GitHub does it. While in gitea the anchors would be put in HTML like
this:
```
<p dir="auto"><a href="#user-content-_toc152597800" rel="nofollow">Review</a></p>
<p dir="auto"><a href="#user-content-_toc152597802" rel="nofollow">Staging</a></p>
<p dir="auto"><a href="#user-content-_toc152597803" rel="nofollow">Development</a></p>
<p dir="auto"><a href="#user-content-_toc152597828" rel="nofollow">Testing</a></p>
<p dir="auto"><a href="#user-content-_toc152597829" rel="nofollow">Unit-tests</a></p>
```
In GitHub, the same anchor's href properties would be the same without
"user-content-" trailing behind.
So my code made sure to change those anchors, so it would not include
"user-content-" and then add respective Event Listeners so it would
scroll into the supposed places.
Fixes: #29196
---------
Co-authored-by: silverwind <me@silverwind.io>
Fomantic grey labels in the dashboard repo lists were showing original
fomantic colors, fixed that. Also slightly tweaked the light theme
colors so it uses same opacity values as dark theme.
<img width="165" alt="Screenshot 2024-03-07 at 21 06 23"
src="72744d6f-2ee1-4e5d-8ba0-b482a446f535">
<img width="167" alt="Screenshot 2024-03-07 at 21 06 00"
src="1ba93775-e5a9-4b28-b90f-59c1e9199687">
- Follows https://github.com/go-gitea/gitea/pull/29121
When I implemented alert blocks I was always testing the markdown in
issue comments. I used `<br />` for line breaks and it looked good. I
have since learned that the markdown on README files doesn't allow these
tags. So a comment with
```md
> [!NOTE]
> If you're interested in using our APIs, we have experimental support with [documentation](https://try.gitea.io/api/swagger).
```
looked like this in a comment
but looked like this in a README
So I changed how we render the alert block by having the alert itself
have a dedicated paragraph, so line breaks happen naturally between
paragraphs.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes: https://github.com/go-gitea/gitea/issues/28371
Fixed by using a JS solution that formats according to `lang`, but alters the 24h format setting as per user's locale. This will work for all tooltips:
<img width="243" alt="Screenshot 2024-03-07 at 23 03 35" src="6d16c71c-6786-4eda-8cdc-50ec68ba62c6">
<img width="250" alt="Screenshot 2024-03-07 at 23 03 17" src="4e26bbb7-12df-4b81-bd37-14705e87e8f7">
<img width="310" alt="Screenshot 2024-03-07 at 23 14 34" src="1ef599f0-6401-4e19-b1da-59cdfc09b0f6">
I think there is only one other place in the UI where we render such absolute dates, which is in the actions view and which I've also fixed:
<img width="275" alt="Screenshot 2024-03-07 at 23 04 00" src="df0fbe1f-96ee-4338-ab5e-2b10e215005d">
Refactor the webhook logic, to have the type-dependent processing happen
only in one place.
---
## Current webhook flow
1. An event happens
2. It is pre-processed (depending on the webhook type) and its body is
added to a task queue
3. When the task is processed, some more logic (depending on the webhook
type as well) is applied to make an HTTP request
This means that webhook-type dependant logic is needed in step 2 and 3.
This is cumbersome and brittle to maintain.
Updated webhook flow with this PR:
1. An event happens
2. It is stored as-is and added to a task queue
3. When the task is processed, the event is processed (depending on the
webhook type) to make an HTTP request
So the only webhook-type dependent logic happens in one place (step 3)
which should be much more robust.
## Consequences of the refactor
- the raw event must be stored in the hooktask (until now, the
pre-processed body was stored)
- to ensure that previous hooktasks are correctly sent, a
`payload_version` is added (version 1: the body has already been
pre-process / version 2: the body is the raw event)
So future webhook additions will only have to deal with creating an
http.Request based on the raw event (no need to adjust the code in
multiple places, like currently).
Moreover since this processing happens when fetching from the task
queue, it ensures that the queuing of new events (upon a `git push` for
instance) does not get slowed down by a slow webhook.
As a concrete example, the PR #19307 for custom webhooks, should be
substantially smaller:
- no need to change `services/webhook/deliver.go`
- minimal change in `services/webhook/webhook.go` (add the new webhook
to the map)
- no need to change all the individual webhook files (since with this
refactor the `*webhook_model.Webhook` is provided as argument)
The tests on migration tests failed but CI reports successfully
2004468596 (step):8:141
This PR will fix the bug on migration v283 and also the CI hidden
behaviour.
The reason is on the Makefile
`GITEA_ROOT="$(CURDIR)" GITEA_CONF=tests/mysql.ini $(GO) test
$(GOTESTFLAGS) -tags='$(TEST_TAGS)' $(MIGRATE_TEST_PACKAGES)` will
return the error exit code.
But
`for pkg in $(shell $(GO) list
code.gitea.io/gitea/models/migrations/...); do \
GITEA_ROOT="$(CURDIR)" GITEA_CONF=tests/mysql.ini $(GO) test
$(GOTESTFLAGS) -tags '$(TEST_TAGS)' $$pkg; \
done`
will not work.
This also fix#29602
# Preview Tab
- Removed the jQuery AJAX call and replaced with our fetch wrapper
- Tested the preview tab functionality and it works as before
# Diff Tab
- Removed the jQuery AJAX call and replaced with htmx
- Tested the diff tab functionality and it works as before
## htmx Attributes
- `hx-post="{{.RepoLink}}..."`: make a POST request to the endpoint
- `hx-indicator=".tab[data-tab='diff']"`: attach the loading indicator
to the tab body
- `hx-target=".tab[data-tab='diff']"`: target the tab body for swapping
with the response
- `hx-swap="innerHTML"`: swap the target's inner HTML
- `hx-include="#edit_area"`: include the value of the textarea (content)
in the request body
- `hx-vals='{"context":"{{.BranchLink}}"}'`: include the context in the
request body
- `hx-params="context,content"`: include only these keys in the request
body
# Demo using `fetch` and `htmx` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
1. Checked all logos, updated 3 of them to newer versions.
2. Remove `open-with-` infix on the editor logos to be consistent with
other files.
<img width="626" alt="image"
src="3b2d9486-6e0a-45c6-b0e4-d38dc4c0b118">
- Increase contrast overall
- Unalias the ansi color in dark theme and copy them to light
- Add outer border
- Add border radius
<img width="1337" alt="Screenshot 2024-03-06 at 22 30 03"
src="11407c0f-0bb2-435e-a034-22b1f106d9b0">
<img width="1335" alt="Screenshot 2024-03-06 at 22 36 59"
src="267db442-0979-4acc-a79e-8579b4cb0262">
Consider executable files as a valid case when returning a DownloadURL for them.
They are just regular files with the difference being the executable permission bit being set.
Co-authored-by: Gusted <postmaster@gusted.xyz>
There are a few inconsistencies within Gitea and this PR addresses one
of them. This PR updates the sign-in page layout, including the register
and openID tabs, to match the layout of the settings pages
(/user/settings) for more consistency.
This PR updates the following routes:
`/user/login`
`/user/sign_up`
`/user/login/openid`
`/user/forgot_password`
`/user/link_account`
`/user/recover_account`
**Before**
<img width="968" alt="Screenshot 2024-02-05 at 8 27 24 AM"
src="fb0cb517-57c0-4eed-be1d-56f36bd1960d">
**After**
<img width="968" alt="Screenshot 2024-02-05 at 8 26 39 AM"
src="428d691d-0a42-4a67-a646-05527f2a7b41">
This PR addresses a revert of the original PR due to this
[comment](https://github.com/go-gitea/gitea/pull/28753#issuecomment-1956596817).
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
After repository commit status has been introduced on dashaboard, the
most top SQL comes from `GetLatestCommitStatusForPairs`.
This PR adds a cache for the repository's default branch's latest
combined commit status. When a new commit status updated, the cache will
be marked as invalid.
<img width="998" alt="image"
src="76759de7-3a83-4d54-8571-278f5422aed3">
There is a fundamental design problem of the "manager" and the "wait
group".
If nothing has started, the "Wait" just panics: sync: WaitGroup is
reused before previous Wait has returned
There is no clear solution besides a complete rewriting of the "manager"
If there are some mistakes in the app.ini, end users would just see the
"panic", but not the real error messages. A real case: #27643
This PR is just a quick fix for the annoying panic problem.
Follow #29248
The project view page still using `user/overview/header.tmpl`
Before:
After:
Detect broken git hooks by checking if the commit id of branches in DB
is the same with the git repo.
It can help #29338#28277 and maybe more issues.
Users could complain about actions, webhooks, and activities not
working, but they were not aware that it is caused by broken git hooks
unless they could see a warning.
<img width="1348" alt="image"
src="2b92a46d-7f1d-4115-bef4-9f970bd695da">
It should be merged after #29493. Otherwise, users could see a ephemeral
warning after committing and opening the repo home page immediately.
And it also waits for #29495, since the doc link (the anchor part) will
be updated.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Unlike other async processing in the queue, we should sync branches to
the DB immediately when handling git hook calling. If it fails, users
can see the error message in the output of the git command.
It can avoid potential inconsistency issues, and help #29494.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix#29136
Before: The result is a table and all line numbers are all in one row.
After: Use a separate table column for the line numbers.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR made the code simpler, reduced unnecessary database queries and
fixed some warnning for the errors.New .
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Also resolves a warning for current releases
```
| ##[group]GitHub Actions runtime token ACs
| ##[warning]Cannot parse GitHub Actions Runtime Token ACs: "undefined" is not valid JSON
| ##[endgroup]
====>
| ##[group]GitHub Actions runtime token ACs
| ##[endgroup]
```
\* this is an error in v3
References in the docker org:
-
831ca179d3/src/main.ts (L24)
-
7d8b4dc669/src/github.ts (L61)
No known official action of GitHub makes use of this claim.
Current releases throw an error when configure to use actions cache
```
| ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
| ##[error]buildx failed with: ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
```
Tested a few things, all working fine. Not sure if the chinese machine
translation is good.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Tailwind content is not going to appear in `web_src/css`,
`web_src/fomantic` or `web_src/svg` or the JSON templates, so we don't
need to have tailwind scan these directories which will speed up the
build.
---------
Co-authored-by: delvh <dev.lh@web.de>
Follow #29418
I think using "flex-wrap: wrap" here is better than hard-coding the screen width.
By using "flex-wrap: wrap", the UI layouts automatically for various
widths (even if in some languages, the sentence might be pretty long)
Fix for regressions introduced by #28805
Enabled projects on repos created before the PR weren't detected. Also,
the way projects mode was detected in settings didn't match the way it
was detected on permission check, which leads to confusion.
Co-authored-by: Giteabot <teabot@gitea.io>
1. Make fomantic build use [our
browserslist](e3524c63d6/package.json (L99)).
I found no other way than to sed-replace into it's js, the normal
browserlist config files do not work. The effect of this change is the
removal of some uneeded CSS vendor prefixes.
2. Regenerate `web_src/fomantic/package-lock.json`, this might shut up
some security scanners.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Some contributors may be surprised when moving the feature PRs to the
next release when the feature freeze time comes. So this PR documents
the habits we have done for feature freeze so people expect the
maintainers' behaviors. We are sorry for disturbing you with the
milestones changes.
A feature freeze announcement should be published 2 or 3 weeks before
the feature freeze by maintainers.
* "mail/issue/default.tmpl": the body is rendered by backend
`markdown.RenderString() HTML`, it has been already sanitized
* "repo/settings/webhook/base_list.tmpl": "Description" is prepared by
backend `ctx.Tr`, it doesn't need to be sanitized
Fixes#17453
This PR adds the abbility to block a user from a personal account or
organization to restrict how the blocked user can interact with the
blocker. The docs explain what's the consequence of blocking a user.
Screenshots:
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Part of #23318
Add menu in repo settings to allow for repo admin to decide not just if
projects are enabled or disabled per repo, but also which kind of
projects (repo-level/owner-level) are enabled. If repo projects
disabled, don't show the projects tab.
---------
Co-authored-by: delvh <dev.lh@web.de>
Add new option:
`visible`: witch can hide a specific field of the form or the created
content afterwards
It is a string array witch can contain `form` and `content`. If only
`form` is present, it wont show up in the created issue afterwards and
the other way around. By default it sets both except for markdown
As they are optional and github don't have any similar thing, it is non
breaking and also do not conflict with it.
With this you can:
- define "post issue creation" elements like a TODO list to track an
issue state
- make sure to have a checkbox that reminds the user to check for a
thing but dont have it in the created issue afterwards
- define markdown for the created issue (was the downside of using yaml
instead of md in the past)
- ...
## Demo
```yaml
name: New Contribution
description: External Contributor creating a pull
body:
- type: checkboxes
id: extern-todo
visible: [form]
attributes:
label: Contribution Guidelines
options:
- label: I checked there exist no similar feature to be extended
required: true
- label: I did read the CONTRIBUTION.MD
required: true
- type: checkboxes
id: intern-todo
visible: [content]
attributes:
label: Maintainer Check-List
options:
- label: Does this pull follow the KISS principe
- label: Checked if internal bord was notifyed
# ....
```
[Demo
Video](https://cloud.obermui.de/s/tm34fSAbJp9qw9z/download/vid-20240220-152751.mkv)
---
*Sponsored by Kithara Software GmbH*
---------
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Filter Repositories by type (resolves#1170, #1318)
before:
after:
Before this change, if we had more than 200 entries being deferred in
loading, the entire table would get replaced thus losing any event
listeners attached to the elements within the table, such as the elipsis
button and commit list with tippy.
With this change we remove the previous javascript code that replaced
the table and use htmx to replace the table.
htmx attributes added:
- `hx-indicator="tr.notready td.message span"`: attach the loading
spinner to the files whose last commit is still being loaded
- `hx-trigger="load"` trigger the request-replace behavior as soon as
possible
- `hx-swap="morph"`: use the idiomorph morphing algorithm, this is the
thing that makes it so the elipsis button event listener is kept during
the replacement, fixing the bug because we don't actually replace the
table, only modifying it
- `hx-post="{{.LastCommitLoaderURL}}"`: make a post request to this url
to get the table with all of the commit information
As part of this change I removed the handling of partial replacement in
the case we have less than 200 "not ready" files. The first reason is
that I couldn't make htmx replace only a subset of returned elements,
the second reason is that we have a cache implemented in the backend
already so the only cost added is that we query the cache a few times
(which is sure to be populated due to the initial request), and the last
reason is that since the last refactor of this functionality that
removed jQuery we don't properly send the "not ready" entries as the
backend expects `FormData` with `f[]` and we send a JSON with `f` so we
always query for all rows anyway.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Without `case <-t.C`, the workers would stop incorrectly, the test won't
pass. For the worse case, there might be only one running worker
processing the queue items for long time because other workers are
stopped. The root cause is related to the logic of doDispatchBatchToWorker.
It isn't a serious problem at the moment, so keep it as-is.
To avoid conflicting with User.GetDisplayName, because there is no data
type in template.
And it matches other methods like GetActFullName / GetActUserName
Partially caused by #29149
When use
```go
releases, err := getReleaseInfos(ctx, &repo_model.FindReleasesOptions{
ListOptions: db.ListOptions{Page: 1, PageSize: 1},
RepoID: ctx.Repo.Repository.ID,
TagNames: []string{ctx.Params("*")},
// only show draft releases for users who can write, read-only users shouldn't see draft releases.
IncludeDrafts: writeAccess,
})
```
replace
```go
release, err := repo_model.GetRelease(ctx, ctx.Repo.Repository.ID, ctx.Params("*"))
```
It missed `IncludeTags: true,`. That means this bug will be occupied only when the release is a tag.
This PR will fix
- Get the right tag record when it's not a release
- Display correct tag tab but not release tag when it's a tag.
- The button will bring the tag name to the new page when it's a single tag page
- the new page will automatically hide the release target inputbox when the tag name is pre filled. This should be backport to v1.21.
Close#29509
Windows, unlike Linux, does not have signal-specified exit codes.
Therefore, we should add a Windows-specific check for Windows. If we
don't do this, the logs will always show a failed status, even though
the command actually works correctly.
If you check the Go source code in exec_windows.go, you will see that it
always returns exit code 1.
The exit code 1 does not exclusively signify a SIGNAL KILL; it can
indicate any issue that occurs when a program fails.
This is only a quick fix to make it easier to backport.
After this PR gets merged, I will propose a new PR to fix the FIXME.
<details>
</details>
* `$referenceUrl`: it is constructed by "Issue.Link", which already has
the "AppSubURL"
* `window.location.href`: AppSubURL could be empty string, so it needs
the trailing slash
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the repo tag edit form functionality and it works as before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the locale change functionality and it works as before
- Tested the delete button functionality and it works as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
* Follow #17746: `HasIssueContentHistory` should use expr builder to
make sure zero value (0) be respected.
* Add "doer" check to make sure `canSoftDeleteContentHistory` only be
called by sign-in users.
Fixes: https://github.com/go-gitea/gitea/issues/29498
I don't quite understand this code, but this change does seem to fix the
issue and I tested a number of diffs with it and saw no issue. The
function gets such value if last line is an addition:
```
LastLeftIdx: (int) 0,
LastRightIdx: (int) 47,
LeftIdx: (int) 47,
RightIdx: (int) 48,
```
If it's a deletion, it gets:
```
LastLeftIdx: (int) 47,
LastRightIdx: (int) 0,
LeftIdx: (int) 48,
RightIdx: (int) 47,
```
So I think it's correct to make this check respect both left and right
side.
close#27496
1. Set pre-step (Set up job) status to `skipped` if job is skipped.
2. Apart from pre-step, the other steps should also be set to `skipped`.
The status of other steps are reported from the runner side. This will
be completed by this PR: https://gitea.com/gitea/act_runner/pulls/500
before:
after:
The value passed into "attachments" sub-template is from
"RedneredContent", so use the same name for consistent. And it makes
readers easy to know its data type.
This PR touches the most interesting part of the "template refactoring".
1. Unclear variable type. Especially for "web/feed/convert.go":
sometimes it uses text, sometimes it uses HTML.
2. Assign text content to "RenderedContent" field, for example: `
project.RenderedContent = project.Description` in web/org/projects.go
3. Assign rendered content to text field, for example: `r.Note =
rendered content` in web/repo/release.go
4. (possible) Incorrectly calling `{{Str2html
.PackageDescriptor.Metadata.ReleaseNotes}}` in
package/content/nuget.tmpl, I guess the name Str2html misleads
developers to use it to "render string to html", but it only sanitizes.
if ReleaseNotes really contains HTML, then this is not a problem.
just some refactoring bits towards replacing **util.OptionalBool** with
**optional.Option[bool]**
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Improve contrast by lightening the text colors in dark theme by around
35%. Additionally, share some variables that had the same or similar
color, which will ease future theme creation.
- `e.error` can be undefined in some cases which would raise an error
inside this error handler, fixed that.
- The displayed message mentions looking into the console, but in my
case of error from `ResizeObserver` there was nothing there, so add this
logging. I think this logging was once there but got lost during
refactoring.
The buttons on the repo release tab were larger in height than on other
tabs because one of them contained the RSS icon which stretched the
button height by 3px. Workaround this problem by applying the "compact"
padding to any such button. They are within 0.4px in height now to
non-icon buttons.
Before:
<img width="406" alt="Screenshot 2024-02-28 at 15 30 23"
src="805bb93a-6fe4-40a0-82d1-03001bee8ecf">
After:
<img width="407" alt="Screenshot 2024-02-28 at 15 38 43"
src="27707588-890f-4852-ab08-105a57eda880">
For comparison, button on issue tab:
<img width="452" alt="Screenshot 2024-02-28 at 15 31 46"
src="74ac13d5-d016-49ba-9dd9-40ed32a748e9">
issue : #28239
The counter number script uses the 'checkbox' attribute to determine
whether an item is selected or not.
However, the input event only increments the counter value, and when
more items are displayed, it does not update all previously loaded
items.
As a result, the display becomes incorrect because it triggers the
update counter script, but checkboxes that are selected without the
'checked' attribute are not counted
1. Fix incorrect `HookEventType` for issue-related events in
`IssueChangeAssignee`
2. Add `case "types"` in the `switch` block in `matchPullRequestEvent`
to avoid warning logs
- Switched to plain JavaScript
- Tested the file searching functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Now uses the same primary color as light theme. The secondary colors are
shifted towards a slightly blue shade. Could maybe desaturate a bit
more, but overall I think I'm happy with it.
Fixes: https://github.com/go-gitea/gitea/issues/27097
<img width="1343" alt="Screenshot 2024-02-27 at 22 21 46"
src="4163c393-b469-4a53-8f4b-1c33aa04f3ac">
<img width="581" alt="image"
src="e621f7f8-5679-4605-bf42-3d5ff1071e1e">
<img width="581" alt="image"
src="20e66493-2457-482b-b8f1-e5710934e189">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Thanks to inferenceus : some sort orders on the "explore/users" page
could list users by their lastlogintime/updatetime.
It leaks user's activity unintentionally. This PR makes that page only
use "supported" sort orders.
Removing the "sort orders" could also be a good solution, while IMO at
the moment keeping the "create time" and "name" orders is also fine, in
case some users would like to find a target user in the search result,
the "sort order" might help.
Previously, it will be treated as "re-run all jobs" when `jobIndex ==
0`. So when you click re-run button on the first job, it triggers all
the jobs actually.
Since `modules/context` has to depend on `models` and many other
packages, it should be moved from `modules/context` to
`services/context` according to design principles. There is no logic
code change on this PR, only move packages.
- Move `code.gitea.io/gitea/modules/context` to
`code.gitea.io/gitea/services/context`
- Move `code.gitea.io/gitea/modules/contexttest` to
`code.gitea.io/gitea/services/contexttest` because of depending on
context
- Move `code.gitea.io/gitea/modules/upload` to
`code.gitea.io/gitea/services/context/upload` because of depending on
context
As per discussion in https://github.com/go-gitea/gitea/pull/29423, I
think this is the right way that does not burden developers having to
think about CSS precedence which should be irrelevant with an atomic CSS
framework.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Fix#29391
With this change, htmx will not follow the redirect in the AJAX request
but instead redirect the whole browser.
To reproduce the bug fixed by this change without waiting a long time
for the token to expire, you can logout in another tab then look in the
original tab. Just make sure to comment out both instances of
`window.location.href = appSubUrl` in the codebase so you won't be
redirected immediately on logout. This is what I did in the following
gifs.
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Regression of #18718. When submitting the form,
EditRepoFileForm.TreePath is marked as "Required", so the value can't be
empty. The value is not used by backend, so use a meaningful dummy value
for it.
Some specific events on Gitlab issues and merge requests are stored
separately from comments as "resource state events". With this change,
all relevant resource state events are downloaded during issue and merge
request migration, and converted to comments.
This PR also updates the template used to render comments to add support
for migrated comments of these types.
ref: https://docs.gitlab.com/ee/api/resource_state_events.html
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the repo archive download links dropdown functionality and it
works as before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fixes#26691
Revert #24972
The alpine package manager expects `noarch` packages in the index of
other architectures too.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Set maxlength attribute in frontend
to long file-name
(same for branch-name and commit-summary)
Follow #29165
* some of them are incorrect, which would lead to double escaping (eg:
`(print (Escape $.RepoLink)`)
* other of them are not necessary, because `Tr` handles strings&HTML
automatically
Suggest to review by "unified view":
https://github.com/go-gitea/gitea/pull/29394/files?diff=unified&w=0
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the repo notice selection deletion button functionality and it
works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Removed all jQuery AJAX calls and replaced with htmx
- Tested the code diff expansion buttons functionality and it works as
before plus a loading indicator
# Demo using `htmx` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the markdown editor preview button functionality and it works
as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the repo collaborator mode dropdown functionality and it works
as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
The citiation button shouldn't be controlled by
DisableDownloadSourceArchives (line 134)
So move it out of that "if" block.
Co-authored-by: Giteabot <teabot@gitea.io>
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the repo collaborator mode dropdown functionality and it works
as before
# Demo using `fetch` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
RenderEmojiPlain(emoji.ReplaceAliases) should be called explicitly for
some contents, but not for everything.
Actually in modern days, in most cases it doesn't need such
"ReplaceAliases". So only keep it for issue/PR titles.
If anyone really needs to do ReplaceAliases for some contents, I will
propose a following fix.
- Switched to plain JavaScript
- Tested the Unicode escape button functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#14459
The following users can add/remove review requests of a PR
- the poster of the PR
- the owner or collaborators of the repository
- members with read permission on the pull requests unit
- Removed all jQuery calls
- Tested the context popup functionality and it works as before
# Demo without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This is the implementation of Recent Commits page. This feature was
mentioned on #18262.
It adds another tab to Activity page called Recent Commits. Recent
Commits tab shows number of commits since last year for the repository.
Adds a new API `/repos/{owner}/{repo}/commits/{sha}/pull` that allows
you to get the merged PR associated to a commit.
---------
Co-authored-by: 6543 <6543@obermui.de>
GitLab generates "system notes" whenever an event happens within the
platform. Unlike Gitea, those events are stored and retrieved as text
comments with no semantic details. The only way to tell whether a
comment was generated in this manner is the `system` flag on the note
type.
This PR adds detection for a new specific kind of event: Changing the
target branch of a PR. When detected, it is downloaded using Gitea's
type for this event, and eventually uploaded into Gitea in the expected
format, i.e. with no text content in the comment.
This PR also updates the template used to render comments to add support
for migrated comments of this type.
ref:
11bd6dc826/app/services/system_notes/merge_requests_service.rb (L102)
Now we can get object format name from git command line or from the
database repository table. Assume the column is right, we don't need to
read from git command line every time.
This also fixed a possible bug that the object format is wrong when
migrating a sha256 repository from external.
<img width="658" alt="image"
src="6e9a9dcf-13bf-4267-928b-6bf2c2560423">
### Overview
This is the implementation of Code Frequency page. This feature was
mentioned on these issues: #18262, #7392.
It adds another tab to Activity page called Code Frequency. Code
Frequency tab shows additions and deletions over time since the
repository existed.
Before:
<img width="1296" alt="image"
src="2603504f-aee7-4929-a8c4-fb3412a7a0f6">
After:
<img width="1296" alt="image"
src="58c03721-729f-4536-a663-9f337f240963">
---
#### Features
- See additions deletions over time since repository existed
- Click on "Additions" or "Deletions" legend to show only one type of
contribution
- Use the same cache from Contributors page so that the loading of data
will be fast once it is cached by visiting either one of the pages
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#27188.
Introduces a check on the installation that tries to parse the FROM
address. If it fails, shows a new error message to the user.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
- Switched to plain JavaScript
- Tested the stopwatch functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
When releasing, the releaser should read all the pull requests carefully
and do some adjustments because some of pull requests' labels are not
right when it's merged.
And the changelog tool needs to be adjusted. If one pull request has
both `bug` and `API`, it should mark it as `bug` but not `API`.
Backport #29339
Extract from #20549
This PR added a new option on app.ini `[admin]USER_DISABLED_FEATURES` to
allow the site administrator to disable users visiting deletion user
interface or allow.
This options are also potentially allowed to define more features in
future PRs.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Databases are one of the most important parts of Forgejo, every
interaction uses the database in one way or another. Therefore, it is
important to maintain the database and recognize when the server is not
doing well with the database. There already is the option to log *every*
SQL query along with its execution time, but monitoring becomes
impractical for larger instances and takes up unnecessary storage in the
logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of
Codeberg, monitoring SQL logs is not very fruitful and most of them are
uninteresting. Recently, in the context of persistent deadlock issues
(https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that
certain queries hold locks on tables like comment and issue for several
seconds. This patch helps to identify which queries these are and when
they happen.
- Added unit test.
(cherry picked from commit 9cf501f1af4cd870221cef6af489618785b71186)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Fix#28843
This PR will bypass the pushUpdateTag to database failure when
syncAllTags. An error log will be recorded.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Switched to plain JavaScript
- Tested the commit ellipsis button functionality and it works as before
- Tested the commits statuses tippy functionality and it works as before
- Tested the last commit loader functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched to plain JavaScript
- Tested the image pasting functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fix#29175
Replace #29207
This PR makes some improvements to the `issue_comment` workflow trigger
event.
1. Fix the bug that pull requests cannot trigger `issue_comment`
workflows
2. Previously the `issue_comment` event only supported the `created`
activity type. This PR adds support for the missing `edited` and
`deleted` activity types.
3. Some events (including `issue_comment`, `issues`, etc. ) only trigger
workflows that belong to the workflow file on the default branch. This
PR introduces the `IsDefaultBranchWorkflow` function to check for these
events.
GitLab generates "system notes" whenever an event happens within the
platform. Unlike Gitea, those events are stored and retrieved as text
comments with no semantic details. The only way to tell whether a
comment was generated in this manner is the `system` flag on the note
type.
This PR adds detection for two specific kinds of events: Scheduling and
un-scheduling of automatic merges on a PR. When detected, they are
downloaded using Gitea's type for these events, and eventually uploaded
into Gitea in the expected format, i.e. with no text content in the
comment.
This PR also updates the template used to render comments to add support
for migrated comments of these two types.
ref:
11bd6dc826/app/services/system_notes/merge_requests_service.rb (L6-L17)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* use `setup(ctx, c.Bool("debug"))` like all other callers
* `setting.RunMode = "dev"` is a no-op.
* `if _, err := os.Stat(setting.RepoRootPath); err != nil` could be
simplified
Fixes#29101
Related #29298
Discard all read data to prevent misinterpreting existing data. Some
discard calls were missing in error cases.
---------
Co-authored-by: yp05327 <576951401@qq.com>
1. `playwright/test` is already installed as part of `deps-frontend` on
CI which runs before, so it's better to not install it again (on a
potentially different version), and just use the version from
package.json and add the `deps-frontend` dependency.
2. `PLAYWRIGHT_DIR` is a undefined variable, so I removed it
```bash
$ git show c8ded77680 | grep PLAYWRIGHT_DIR
+playwright: $(PLAYWRIGHT_DIR)
```
Fixes the reason why #29101 is hard to replicate.
Related #29297
Create a repo with a file with minimum size 4097 bytes (I use 10000) and
execute the following code:
```go
gitRepo, err := gitrepo.OpenRepository(db.DefaultContext, <repo>)
assert.NoError(t, err)
commit, err := gitRepo.GetCommit(<sha>)
assert.NoError(t, err)
entry, err := commit.GetTreeEntryByPath(<file>)
assert.NoError(t, err)
b := entry.Blob()
// Create a reader
r, err := b.DataAsync()
assert.NoError(t, err)
defer r.Close()
// Create a second reader
r2, err := b.DataAsync()
assert.NoError(t, err) // Should be no error but is ErrNotExist
defer r2.Close()
```
The problem is the check in `CatFileBatch`:
79217ea63c/modules/git/repo_base_nogogit.go (L81-L87)
`Buffered() > 0` is used to check if there is a "operation" in progress
at the moment. This is a problem because we can't control the internal
buffer in the `bufio.Reader`. The code above demonstrates a sequence
which initiates an operation for which the code thinks there is no
active processing. The second call to `DataAsync()` therefore reuses the
existing instances instead of creating a new batch reader.
Follow #29024
Major changes:
* refactor validLinksPattern to fullURLPattern and add comments, now it
accepts "protocol:" prefix
* rename `IsLink*` to `IsFullURL*`, and remove unnecessray "mailto:"
check
* fix some comments (by the way)
* rename EmojiShortCodeRegex -> emojiShortCodeRegex (by the way)
- Switched to plain JavaScript
- Tested the installation page functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Use case in `repo-commit` was tested until the point where the POST
request was sent with the same payload.
- Use case in `repo-legacy` was tested completely with comment editing.
- `jquery/no-fade` was disabled as well to stay in sync with
`no-jquery/no-fade`, had no violations.
For some user (as me), documentation lack of precision about where to
store issue/pr template.
I propose an enhancement about this point. With bold exergue and
precision about server itself.
I've found some user with same interrogation as :
https://forum.gitea.com/t/issue-template-directory/3328
---------
Co-authored-by: Km <cam.lafit@azerttyu.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Switched to plain JavaScript
- Tested the wiki creation form functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
In a previous [PR](https://github.com/go-gitea/gitea/pull/28753) we
moved the labels to be above the inputs. The PR ensures that the
alignment is also on both tabs of the link account page
(`/user/link_account`).
Before
<img width="1094" alt="before"
src="ac1e86bd-c4d6-4e45-87d1-87bb8a736149">
After
<img width="1094" alt="after"
src="1b5fc109-f4d2-43ee-b924-0a9e53a0e391">
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
- Switched to plain JavaScript
- Tested the repo migration form functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
When we update an lfs file by API
`api/v1/repos/{owner}/{repo}/contents/{filepath}`, there will show an
error
```json
{
"message": "Put \"05904d6c7b\": readfrom tcp [::1]:57300->[::1]:9000: content size does not match",
"url": "http://localhost:3000/api/swagger"
}
```
The reason of this error is
https://github.com/go-gitea/gitea/blob/main/services/repository/files/update.go,
in this file, the `file.ContentReader` been used twice. So when use
`file.ContentReader` in the second time, the `i` of this Reader has been
updated to the length of the content. it will return 0 and an `io.EOF`
error when we try to read cotent from this Reader.
fixes#21892
This PR disallows merging a PR when not all commit status contexts
configured in the branch protection are met.
Previously, the PR was happy to merge when one commit status was
successful and the other contexts weren't reported.
Any feedback is welcome, first time Go :-)
I'm also not sure if the changes in the template break something else
Given the following branch protection:
This was shown before the change:
With the change, it is now shown as this:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Some images like MacOS screenshots contain
[pHYs](http://www.libpng.org/pub/png/book/chapter11.html#png.ch11.div.8)
data which we can use to downscale uploaded images so they render in the
same dppx ratio in which they were taken.
Before:
<img width="584" alt="image"
src="50979e3a-5d5a-40dc-a0a4-36eb6e28f14a">
After:
<img width="329" alt="image"
src="0690902a-f2fe-4c6b-97b3-6fdd67c21bad">
1. Tweak diff header and remove a numbe of unneeded CSS for it:
Before:
<img width="433" alt="Screenshot 2024-02-18 at 01 08 09"
src="d8b377c0-57bc-44d5-bb57-a582c7d4b3b4">
After:
<img width="463" alt="Screenshot 2024-02-18 at 01 07 56"
src="d08c17e7-5b86-4d07-81da-6371f4754325">
3. Reduce height of review textarea and also reduce fomantic's CSS from
12em to 8em. Now fits better on my screen:
<img width="1352" alt="image"
src="5c658d13-295e-4929-94da-13ade888020d">
---------
Co-authored-by: delvh <dev.lh@web.de>
https://github.com/go-gitea/gitea/pull/27172#discussion_r1493735466
When cleanup artifacts, it removes storage first. If storage is not
exist (maybe delete manually), it gets error and continue loop. It makes
a dead loop if there are a lot pending but non-existing artifacts.
Now it updates db record at first to avoid keep a lot of pending status
artifacts.
Fix#29166
Add support for the following activity types of `pull_request`
- assigned
- unassigned
- review_requested
- review_request_removed
- milestoned
- demilestoned
Add deletion link in runs view page.
Fix#26315
When click deletion button. It marks this artifact `need-delete`.
This artifact would be deleted when actions cleanup cron task.
Follow #29165.
* Introduce JSONTemplate to help to render JSON templates
* Introduce JSEscapeSafe for templates. Now only use `{{ ... |
JSEscape}}` instead of `{{ ... | JSEscape | Safe}}`
* Simplify "UserLocationMapURL" useage
- Switched to plain JavaScript
- Tested the repo release form functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Switched to plain JavaScript
- Tested the repo migrate functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
2 instances of `for` with a wrong value and 1 `for` that had a reference
to a `name` instead of `id`.
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Relates to #28654, #29039 and #29050.
The "show outdated comments" flag should only apply to the file diff
view.
On the PR timeline, outdated comments are always shown.
So they should also be loaded when (un)resolving a conversation on the
timeline page.
- Switched to plain JavaScript
- Tested the webhook editing functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Switched to plain JavaScript
- Tested the context popup functionality and it works as before
# Demo using JavaScript without jQuery
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
There is a missing newline when generating the debian apt repo InRelease
file, which results in output like:
```
[...]
Date: Wed, 14 Feb 2024 05:03:01 UTC
Acquire-By-Hash: yesMD5Sum:
51a518dbddcd569ac3e0cebf330c800a 3018 main-dev/binary-amd64/Packages
[...]
```
It appears this would probably result in apt ignoring the
Acquire-By-Hash setting and not using the by-hash functionality,
although I'm not sure how to confirm it.
- Switched to plain JavaScript
- Tested the quick submit functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Switched to plain JavaScript
- Tested the user rename prompt toggling functionality and it works as
before
- Fixed bug that allowed pasting with the mouse to avoid the prompt
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
- Switched to plain JavaScript
- Tested the organization rename prompt toggling functionality and it
works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Old code is not consistent for generating & decoding the JWT secrets.
Now, the callers only need to use 2 consistent functions:
NewJwtSecretWithBase64 and DecodeJwtSecretBase64
And remove a non-common function Base64FixedDecode from util.go
- Switched to plain JavaScript
- Tested the SSH key title functionality and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Add more details for the docker tag when using container registry.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
- Tweak colors, remove link color from repo name and make text use
inherited color
- Downsize repo icon from 32px to 24px
Before:
<img width="255" alt="Screenshot 2024-02-11 at 15 31 00"
src="f65c1d02-d8a3-4171-ad3d-4c95871fb2ba">
After:
<img width="260" alt="Screenshot 2024-02-11 at 15 30 48"
src="a9b25b56-8d3f-4910-af60-2513d44f6d81">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It's now possible to change webhook-type in create-view.
before:
after:
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Switched to plain JavaScript
- Tested the task list functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Before:
After:
Is this a bug? Maybe we don't need to fix this, as it only occurs when
there's only one user in the organization. 🤔
There are a few inconsistencies within Gitea and this PR addresses one of them.
This PR updates the sign-in page layout, including the register and openID tabs,
to match the layout of the settings pages (`/user/settings`) for more consistency.
**Before**
<img width="968" alt="Screenshot 2024-02-05 at 8 27 24 AM"
src="fb0cb517-57c0-4eed-be1d-56f36bd1960d">
**After**
<img width="968" alt="Screenshot 2024-02-05 at 8 26 39 AM"
src="428d691d-0a42-4a67-a646-05527f2a7b41">
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
Introduce a new function checkGitVersionCompatibility, when the git
version can't be used by Gitea, tell the end users to downgrade or
upgrade. The refactored functions are related to make the code easier to
test.
And simplify the comments for "safe.directory"
---------
Co-authored-by: delvh <dev.lh@web.de>
This is supposed to prevent a power vacuum so that a problem similar to
the 2024 election will not happen again
Additionally, update current TOC members from 2023 to 2024.
- Switched to plain JavaScript
- Tested the form and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Shows the 'View at this point in history'-link (from #27354) for every
commit
before:
after:
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
The old code `GetTemplatesFromDefaultBranch(...) ([]*api.IssueTemplate,
map[string]error)` doesn't really follow Golang's habits, then the
second returned value might be misused. For example, the API function
`GetIssueTemplates` incorrectly checked the second returned value and
always responds 500 error.
This PR refactors GetTemplatesFromDefaultBranch to
ParseTemplatesFromDefaultBranch and clarifies its behavior, and fixes the
API endpoint bug, and adds some tests.
And by the way, add proper prefix `X-` for the header generated in
`checkDeprecatedAuthMethods`, because non-standard HTTP headers should
have `X-` prefix, and it is also consistent with the new code in
`GetIssueTemplates`
Update `docs/content/administration/backup-and-restore.zh-cn.md`
`docs/content/contributing/guidelines-frontend.zh-cn.md`
`docs/content/help/support.zh-cn.md`
`docs/content/installation/database-preparation.zh-cn.md`
`docs/content/installation/windows-service.zh-cn.md`
`docs/content/usage/profile-readme.zh-cn.md` to be consistent with the
English document
- Update all excluding `@mcaptcha/vanilla-glue` and
`eslint-plugin-array-func`
- Remove deprecated and duplicate eslint rule
- Tested Monaco, Mermaid and Swagger
This border-radius is obsolete since we changed the comment rendering a
few months ago and it caused incorrect display on blockquotes.
Before:
<img width="160" alt="Screenshot 2024-02-10 at 18 42 48"
src="ccbf4660-acf9-4268-aad9-1ad49d317a67">
After:
<img width="135" alt="Screenshot 2024-02-10 at 18 42 40"
src="6f588e02-3b2a-49ee-b459-81d8068b2f4e">
It's too thick
I made it match GitHub's size
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Commit 360b3fd17c (Include username in email headers (#28981),
2024-02-03) adds usernames to the From field of notification emails in
the form of `Display Name (@username)`, to prevent spoofing. However,
some email filtering software flags "@" in the display name part of the
From field as potential spoofing, as you could set the display name part
to another email address than the one you are sending from (e.g.
`From: "apparent@email-address" <actual@email-address>`). To avoid
being flagged, instead send emails from `Display Name (username)`.
Closes: #29107
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Use maintained fork https://github.com/golangci/misspell
- Rename `mispell-check` to `lint-spell`, add `lint-spell-fix`
- Run `lint-spell` in separate actions step
- Lint more files, fix discovered issues
- Remove inaccurate and outdated info in docs (we do not need GOPATH for
tools anymore)
Maybe later we can add more spellchecking tools, but I have not found
any good ones yet.
Replace #28849. Thanks to @yp05327 for the looking into the problem.
Fix#28840
The old behavior of newSignatureFromCommitline is not right. The new
parseSignatureFromCommitLine:
1. never fails
2. only accept one format (if there is any other, it could be easily added)
And add some tests.
IE usage has dropped enough to not be included in the defaults
browserslist anymore as per https://browsersl.ist/#q=defaults, so we can
use the defaults now.
I'm using this convention in other projects and I think it makes sense
for gitea too because the vitest setup file is loaded globally for all
tests, not just ones in web_src, so it makes sense to be in the root.
Outgoing new release e-mail notifications were missing links to the
actual release. An example from Codeberg.org e-mail:
<a href=3D"">View it on Codeberg.org</a>.<br/>
This PR adds `"Link"` context property pointing to the release on the
web interface.
The change was tested using `[mailer] PROTOCOL=dummy`.
Signed-off-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
When setting `url.host` on a URL object with no port specified (like is
the case of default port), the resulting URL's port will not change.
Workaround this quirk in the URL standard by explicitely setting port
for the http and https protocols.
Extracted the logic to a function for the purpose of testing. Initially
I wanted to have the function in utils.js, but it turns out esbuild can
not treeshake the unused functions which would result in the
webcomponents chunk having all 2kB utils.js inlined, so it seemed not
worth.
Fixes: https://github.com/go-gitea/gitea/issues/29084
Try to improve #28949
1. Make `ctx.Data["ShowOutdatedComments"] = true` by default: it brings
consistent user experience, and sometimes the "outdated (source
changed)" comments are still valuable.
2. Show a friendly message if the comment won't show, then the end users
won't fell that "the comment disappears" (it is the special case when
`ShowOutdatedComments = false`)
Fix for gitea putting everything into one request without batching and
sending it to Elasticsearch for indexing as issued in #28117
This issue occured in large repositories while Gitea tries to
index the code using ElasticSearch.
I've applied necessary changes that takes batch length from below config
(app.ini)
```
[queue.code_indexer]
BATCH_LENGTH=<length_int>
```
and batches all requests to Elasticsearch in chunks as configured in the
above config
Remove lightningcss and minify with esbuild again. The size of output
CSS will increase by around 1.4%, but I think it's worth it to allow
building gitea in more cases like the one in the linked issue. We can
reconsider once lightningcss becomes more stable.
Fixes: https://github.com/go-gitea/gitea/issues/29058
On the release list page, if the user doesn't have the permission to
read code, the code links will lead to 404 pages or api errors:
<img width="1297" alt="image"
src="a74fbc63-6dd6-43c6-853c-28acdbfdcb4e">
After this PR:
<img width="1297" alt="image"
src="a626373d-c2df-40a9-8fed-1b12ff6bc56f">
And this PR also removed some dead code. After #23465, the tag list page
has an independent template, and all `IsTag` in the release list
template are always false.
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Removed `templates/repo/settings/nav.tmpl`.
I don't think it's still used.
On main branch:
<img width="521" alt="image"
src="c0bf958c-698a-4348-840e-3ade0312bd6e">
On commit 755eec745f (the commit that
created this file):
<img width="615" alt="image"
src="5156b26d-1ecd-4197-a0a6-dc2d17652ff4">
Resolves https://github.com/go-gitea/gitea/issues/28704
Example of an entry in the generated `APKINDEX` file:
```
C:Q1xCO3H9LTTEbhKt9G1alSC87I56c=
P:hello
V:2.12-r1
A:x86_64
T:The GNU Hello program produces a familiar, friendly greeting
U:https://www.gnu.org/software/hello/
L:GPL-3.0-or-later
S:15403
I:36864
o:hello
m:
t:1705934118
D:so:libc.musl-x86_64.so.1
p:cmd:hello=2.12-r1
i:foobar=1.0 !baz
k:42
```
the `i:` and `k:` entries are new.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fixes https://codeberg.org/forgejo/forgejo/issues/2257
Draft status of a PR is currently not exposed by the API. This PR adds a
'draft' field to pull requests in the API, which is used to correctly
set the PR color/icon in a ContextPopup.
---
Before:
After:
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
This PR adds a new `must-change-password` parameter to the
`change-password` cli command.
We already have the `must-change-password` command but it feels natural
to have this integrated into the `change-password` cli command.
---------
Co-authored-by: 6543 <6543@obermui.de>
Emails from Gitea comments do not contain the username of the commenter
anywhere, only their display name, so it is not possible to verify who
made a comment from the email itself:
From: "Alice" <email@gitea>
X-Gitea-Sender: Alice
X-Gitea-Recipient: Bob
X-GitHub-Sender: Alice
X-GitHub-Recipient: Bob
This comment looks like it's from @alice.
The X-Gitea/X-GitHub headers also use display names, which is not very
reliable for filtering, and inconsistent with GitHub's behavior:
X-GitHub-Sender: lunny
X-GitHub-Recipient: gwymor
This change includes both the display name and username in the From
header, and switches the other headers from display name to username:
From: "Alice (@fakealice)" <email@gitea>
X-Gitea-Sender: fakealice
X-Gitea-Recipient: bob
X-GitHub-Sender: fakealice
X-GitHub-Recipient: bob
This comment looks like it's from @alice.
This change allows act_runner / actions_runner to use jwt tokens for
`ACTIONS_RUNTIME_TOKEN` that are compatible with
actions/upload-artifact@v4.
The official Artifact actions are now validating and extracting the jwt
claim scp to get the runid and jobid, the old artifact backend also
needs to accept the same token jwt.
---
Related to #28853
I'm not familar with the auth system, maybe you know how to improve this
I have tested
- the jwt token is a valid token for artifact uploading
- the jwt token can be parsed by actions/upload-artifact@v4 and passes
their scp claim validation
Next steps would be a new artifacts@v4 backend.
~~I'm linking the act_runner change soonish.~~
act_runner change to make the change effective and use jwt tokens
<https://gitea.com/gitea/act_runner/pulls/471>
Behaviour now matches GH. Safeguard added in the for loop because
`textContent` may be null in which case it does not make sense to render
the copy button.
I tripped over this strange method and I don't think we need that
workaround to fix the value.
old:
new:
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
To make sure we don't abuse it.
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix google logo in user security page: #28701
Before
after
Renames it to `ENABLED` to be consistent with other settings and
deprecates it.
I believe this change is necessary because other setting groups such as
`attachment`, `cors`, `mailer`, etc. have an `ENABLED` setting, but
`oauth2` is the only one with an `ENABLE` setting, which could cause
confusion for users.
This is no longer a breaking change because `ENABLE` has been set as
deprecated and as an alias to `ENABLED`.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
The current animation loops in a very fast manner, causing a slight
feeling of uncomfortableness. This change slows it a bit for a smoother
experience.
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fix#22066
# Purpose
This PR fix the releases will be deleted when mirror repository sync the
tags.
# The problem
In the previous implementation of #19125. All releases record in
databases of one mirror repository will be deleted before sync.
Ref:
https://github.com/go-gitea/gitea/pull/19125/files#diff-2aa04998a791c30e5a02b49a97c07fcd93d50e8b31640ce2ddb1afeebf605d02R481
# The Pros
This PR introduced a new method which will load all releases from
databases and all tags on git data into memory. And detect which tags
needs to be inserted, which tags need to be updated or deleted. Only
tags releases(IsTag=true) which are not included in git data will be
deleted, only tags which sha1 changed will be updated. So it will not
delete any real releases include drafts.
# The Cons
The drawback is the memory usage will be higher than before if there are
many tags on this repository. This PR defined a special release struct
to reduce columns loaded from database to memory.
This should fix https://github.com/go-gitea/gitea/issues/28927
Technically older versions of Git would support this flag as well, but
per https://github.com/go-gitea/gitea/pull/28466 that's the version
where using it (object-format=sha256) left "experimental" state.
`sha1` is (currently) the default, so older clients should be unaffected
in either case.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Currently, the `updateMirror` function which update the mirror interval
and enable prune properties is only executed by the `Edit` function. But
it is only triggered if `opts.MirrorInterval` is not null, even if
`opts.EnablePrune` is not null.
With this patch, it is now possible to update the enable_prune property
with a patch request without modifying the mirror_interval.
## Example request with httpie
### Currently:
**Does nothing**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
**Updates both properties**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" "mirror_interval=10m" -A bearer -a $gitea_token
```
### With the patch
**Updates enable_prune only**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
Fixes#28699
This PR implements the `MigrateRepository` method for `actionsNotifier`
to detect the schedules from the workflow files in the migrated
repository.
This simple shows in the Web UI is a file is vendored and/or generated.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Hi, I think these changes could be useful for default labels when
creating new repos.
The PR includes the following changes:
- Add missing exclusive flag for Kind/ scope in labels.
- Move Breaking label into new Compat/ scope.
The method can't be called with an outer transaction because if the user
is not a collaborator the outer transaction will be rolled back even if
the inner transaction uses the no-error path.
`has == 0` leads to `return nil` which cancels the transaction. A
standalone call of this method does nothing but if used with an outer
transaction, that will be canceled.
Before:
After:
(TestOrg:test is a tag not branch)
Problem:
In the template, we will not add `compare pull` class when
`PageIsComparePull` is false.
a370efc13f/templates/repo/diff/compare.tmpl (L2)
But in the js, we are using `.repository.compare.pull` to find the
button:
a370efc13f/web_src/js/features/repo-legacy.js (L552-L563)
So, if `PageIsComparePull` is false, the `New Pull Request` button will
be there, but has no response when we click it.
Gitea treat JS errors seriously, so sometimes the JS errors caused by
3rdparty code (eg: browser extensions) would also be reported on Gitea
UI: TypeError: WeakMap key undefined (caused by extension DarkReader's
bug) #28861
To avoid fill the user's screen with a lot of error messages, this PR
merges the same error messages into one, like this:
```js
<div class="page-content">
<div class="... js-global-error" data-global-error-msg-compact="testmsg1" data-global-error-msg-count="2">test msg 1 (2)</div>
<div class="... js-global-error" data-global-error-msg-compact="testmsg2" data-global-error-msg-count="1">test msg 2</div>
</div>
```
- Use htmx to perform the button request
- `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` to authenticate (we
should probably learn to reuse this)
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-swap="outerHTML"` to replace the card (as opposed to its inner
content) with the new card that shows the new follower count and button
color
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
The previous variables are used by the compiler and aren't too useful
for non-developers. The newly listed variables are more likely to be of
interest.
Apologies for this drive-by PR, I probably missed instructions from the
contributors guide. The patch can be regarded as a simple way to explain
the problem and solution. Feel free to close and possibly create a new
PR that does adhere to the contributors guide.
Currently only SHA1 repositories are supported by Gitea. This adds
support for alternate SHA256 with the additional aim of easier support
for additional hash types in the future.
Fixes: #13794
Limited by: https://github.com/go-git/go-git/issues/899
Depend on: #28138
<img width="776" alt="图片" src="5448c9a7-608e-4341-a149-5dd0069c9447">
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Fix#28323
Reason was mentioned here:
https://github.com/go-gitea/gitea/issues/28323#issuecomment-1841867298
### Changes: (maybe breaking)
We can rerun jobs in Gitea, so there will be some problems in
calculating duration time.
In this PR, I use the exist `Started` and `Stopped` column to record the
last run time instead of the total time,
and add a new `PreviousDuration` column to record the previous duration
time.
You can also check the cost time of last run:
Related #26984
(https://github.com/go-gitea/gitea/pull/26984#issuecomment-1889588912)
Fix admin cleanup message.
Fix models `Get` not respecting default values.
Rebuild RPM repository files after cleanup.
Do not add RPM group to package version name.
Force stable sorting of Alpine/Debian/RPM repository data.
Fix missing deferred `Close`.
Add tests for multiple RPM groups.
Removed non-cached `ReplaceAllStringRegex`.
If there are multiple groups available, it's stated in the package
installation screen:
Git 2.43.0 will not detect a git repository as valid without refs/
subdirectory present. `git gc` cleans this up and puts it in
packed-refs. We must keep refs/ non-empty.
When LFS hooks are present in gitea-repositories, operations like git
push for creating a pull request fail. These repositories are not meant
to include LFS files or git push them, that is handled separately. And
so they should not have LFS hooks.
Installing git-lfs on some systems (like Debian Linux) will
automatically set up /etc/gitconfig to create LFS hooks in repositories.
For most git commands in Gitea this is not a problem, either because
they run on a temporary clone or the git command does not create LFS
hooks.
But one case where this happens is git archive for creating repository
archives. To fix that, add a GIT_CONFIG_NOSYSTEM=1 to disable using the
system configuration for that command.
According to a comment, GIT_CONFIG_NOSYSTEM is not used for all git
commands because the system configuration can be intentionally set up
for Gitea to use.
Resolves#19810, #21148
Fix `Uploaded artifacts should be overwritten`
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
This is a little bugfix. Inline code is usually rendered in issue
titles, but it is missing in the activity tab.
Before:
After:
As more and more options can be set for creating the repository, I don't
think we should put all of them into the creation web page which will
make things look complicated and confusing.
And I think we need some rules about how to decide which should/should
not be put in creating a repository page. One rule I can imagine is if
this option can be changed later and it's not a MUST on the creation,
then it can be removed on the page. So I found trust model is the first
one.
This PR removed the trust model selections on creating a repository web
page and kept others as before.
This is also a preparation for #23894 which will add a choice about SHA1
or SHA256 that cannot be changed once the repository created.
This PR adds a section to the documentation that links to the project
[Opengist](https://github.com/thomiceli/opengist) on GitHub.
The feature was proposed in #16670 but didn't resonate well with the
maintainers.
If you view a file, you can now see the latest commit that changed that file.
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
When JavaScript is not loaded, fall back to displaying reaction tooltips
with the default browser `title` attribute. An element with a present
but empty `data-tooltip-content` will use the `title` attribute for its
tippy.js tooltip content, so when JavaScript is enabled, this functions
the same as the current behavior.
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Fix#27722Fix#27357Fix#25837
1. Fix the typo `BlockingByDependenciesNotPermitted`, which causes the
`not permitted message` not to show. The correct one is `Blocking` or
`BlockedBy`
2. Rewrite the perm check. The perm check uses a very tricky way to
avoid duplicate checks for a slice of issues, which is confusing. In
fact, it's also the reason causing the bug. It uses `lastRepoID` and
`lastPerm` to avoid duplicate checks, but forgets to assign the
`lastPerm` at the end of the code block. So I rewrote this to avoid this
trick.
3. It also reuses the `blocks` slice, which is even more confusing. So I
rewrote this too.
When creating a pull request, allow directly assigning it to a project,
as it is already possible for issues.
After:
Redesign repo header with following new aspects:
- responsive & better-looking repo title
- hide repo button text instead of icons in mobile view
- use same tab style as on explore and org page
<details>
<summary>Before:</summary>
</details>
<details>
<summary>After:</summary>
The current rpm repository places all packages in the same repository,
and different systems (el7,f34) may hit packages that do not belong to
this distribution ( #25304 ) , which now supports grouping of rpm.
Fixes#25304 .
Fixes#27056 .
Refactor: [#25866](https://github.com/go-gitea/gitea/pull/25866)
Follow GitHubs behavior of showing the label description as a tooltip
instead of the browser native title.
## Before
## After
Since #20805, code can be hidden.
However, the related settings are still shown even though they don't
have any meaning then.
5fdee54d-ac81-418a-82f7-eadff048cedd
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
- If there's a error with the Git command in `checkIfPRContentChanged`
the stderr wasn't concatendated to the error, which results in still not
knowing why an error happend.
- Adds concatenation for stderr to the returned error.
- Ref: https://codeberg.org/forgejo/forgejo/issues/2077
Co-authored-by: Gusted <postmaster@gusted.xyz>
Gitea prefers to use relative URLs in code (to make multiple domain work
for some users)
So it needs to use `toAbsoluteUrl` to generate a full URL when click
"Reference in New Issues"
And add some comments in the test code
In #26851, it assumed that `Commit` always exists when
`PageIsDiff==true`.
But for a 404 page, the `Commit` doesn't exist, so the following code
would cause panic because nil value can't be passed as string parameter
to `IsMultilineCommitMessage(string)` (or the StringUtils.Cut in later
PRs)
User can select access repo or owner's home page.
Before:
After:
In the commit 5a56f9699c (3.) the min-height was applied to all wiki
elements. This resulted in huge blank spaces when viewing the wiki.
This fixes this by only applying the min-height to the preview when
editing.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2080
(cherry picked from commit 8f0baefe5dadc929fe7456c36c8b205e96f228f0)
Co-authored-by: Fl1tzi <git@fl1tzi.com>
In #26365 issue references were disabled entirely for documents,
intending to match GitHub behavior. However cross-references do appear
to work in documents on GitHub.
This is useful for example to write release notes in a markdown document
and reference issues. While the simpler syntax may create links when not
intended, hopefully the cross-reference syntax is unique enough to avoid
it.
There was a question about "how to improve the datetime display for
SSH/PGP/WebAuthn"
https://github.com/go-gitea/gitea/pull/28262#issuecomment-1831141611
The root problem is that `DateTime` misses the "data-tooltip-content"
attribute, which should be used to make the tooltip popup smoothly.
Now the UI is consistent and the end users could see the detailed
hour/minute/second easily by hovering the element.
- Resolves https://github.com/go-gitea/gitea/issues/22493
- Related to https://github.com/go-gitea/gitea/issues/4520
Some admins prefer all timestamps to display the full date instead of
relative time. They can do that now by setting
```ini
[ui]
PREFERRED_TIMESTAMP_TENSE = absolute
```
This setting is set to `mixed` by default, allowing dates to render as
"5 hours ago". Here are some screenshots of the UI with this setting set
to `absolute`:
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: delvh <dev.lh@web.de>
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
I noticed the `BuildAllRepositoryFiles` function under the Alpine folder
is unused and I thought it was a bug.
But I'm not sure about this. Was it on purpose?
Fixes#28534
---
Before:
After:
<img width="304" alt="image"
src="53d04ad0-6d5c-47e2-8a7d-30a4d5dd9959">
Should we also apply this for long filenames in Assets?
It looks like this currently:
<img width="285" alt="image"
src="e2dcbb2e-30d5-4e35-b304-6274ef60bda7">
---------
Co-authored-by: Mihir <mihir.joshi@senpiper.com>
According to [Debian
docs](https://wiki.debian.org/DebianRepository/UseThirdParty):
> The certificate MUST NOT be placed in /etc/apt/trusted.gpg.d or loaded
by apt-key add.
> ...
> If future updates to the certificate will be managed by an apt/dpkg
package as recommended below, then it SHOULD be downloaded into
/usr/share/keyrings using the same filename that will be provided by the
package. If it will be managed locally , it SHOULD be downloaded into
/etc/apt/keyrings instead.
> ...
> A sources.list entry SHOULD have the signed-by option set.
#28361 introduced `syncBranchToDB` in `CreateNewBranchFromCommit`. This
PR will revert the change because it's unnecessary. Every push will
already be checked by `syncBranchToDB`.
This PR also created a test to ensure it's right.
fix#28436.
the doc https://docs.gitea.com/usage/profile-readme maybe also need to
be updated to tell that
the main branch is necessary,which means the following three conditions
should be satisfied:
- repo: **.profile**
- branch: **[default branch]**
- markdown: **README.md**
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
This PR adds instance-level variables, and so closes#27726
This reverts commit b35d3fddfa.
This is totally wrong. I think `Update join` hasn't been supported well
by xorm.
I just revert the PR and will try to send another one.
Related to https://github.com/go-gitea/gitea/issues/28279
When merging artifact chunks, it lists chunks from storage. When storage
is minio, chunk's path contains `MINIO_BASE_PATH` that makes merging
break.
<del>So trim the `MINIO_BASE_PATH` when handle chunks.</del>
Update the chunk file's basename to retain necessary information. It
ensures that the directory in the chunk's path remains unaffected.
Update more actions to use nodejs20 runtime and also update the docs for
checkout action usage.
similar to:
- #27836
- #27096
---------
Signed-off-by: Rui Chen <rui@chenrui.dev>
Fix#28526, regression of
* #26365
(although the author of #26365 has recent activities, but there is no
response for the regression, so I proposed this quick fix and keep the
fix simple to make it easier to backport to 1.21)
Using the Go Official tool `golang.org/x/tools/cmd/deadcode@latest`
mentioned by [go blog](https://go.dev/blog/deadcode).
Just use `deadcode .` in the project root folder and it gives a list of
unused functions. Though it has some false alarms.
This PR removes dead code detected in `models/issues`.
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
There is an accessibility issue in the interface when attempting to
delete a repository. When I click on "Delete repository," a dialog box
appears, requiring confirmation to proceed with the repository deletion.
However, when I press the "Repo name" label, the wrong input field gains
focus. The focused field is located behind the dialog and is intended
for renaming the repository.
- Modify the `Password` field in `CreateUserOption` struct to remove the
`Required` tag
- Update the `v1_json.tmpl` template to include the `email` field and
remove the `password` field
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Resolves https://github.com/go-gitea/gitea/issues/28451.
This change follows the recommendation by wxiaoguang to remove the
"Disable Minimum Key Size Check" from the "Service Configuration"
section of the UI, because this option belongs to the "SSH
Configuration" section of the administration menu and already has a
functioning indicator in that section of the UI.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- When a repository is orphaned and has objects stored in any of the
storages such as repository avatar or attachments the delete function
would error, because the storage module wasn't initalized.
- Add code to initialize the storage module.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1954
Co-authored-by: Gusted <postmaster@gusted.xyz>
* Close#28444
* Actually, it doesn't need to use that trick because it looks like it
is not necessary, no user really needs it
* Remove the hidden (legacy) "doctor" subcommand and update documents
* Fix "actions" usage
Windows-based shells will add a CRLF when piping the token into
ssh-keygen command resulting in
verification error. This resolves#21527.
---------
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Recently Docker started to use the optional `POST /v2/token` endpoint
which should respond with a `404 Not Found` status code instead of the
current `405 Method Not Allowed`.
> Note: Not all token servers implement oauth2. If the request to the
endpoint returns 404 using the HTTP POST method, refer to Token
Documentation for using the HTTP GET method supported by all token
servers.
Several fields in the "Verify group membership in LDAP" docs were
confusingly titled when compared to the actual fields in the
application, this change rectifies that by matching the docs to the
fields already present in gitea.
Signed-off-by: David Hulick <dave.hulick@gmail.com>
## Changes
- Add deprecation warning to `Token` and `AccessToken` authentication
methods in swagger.
- Add deprecation warning header to API response. Example:
```
HTTP/1.1 200 OK
...
Warning: token and access_token API authentication is deprecated
...
```
- Add setting `DISABLE_QUERY_AUTH_TOKEN` to reject query string auth
tokens entirely. Default is `false`
## Next steps
- `DISABLE_QUERY_AUTH_TOKEN` should be true in a subsequent release and
the methods should be removed in swagger
- `DISABLE_QUERY_AUTH_TOKEN` should be removed and the implementation of
the auth methods in question should be removed
## Open questions
- Should there be further changes to the swagger documentation?
Deprecation is not yet supported for security definitions (coming in
[OpenAPI Spec version
3.2.0](https://github.com/OAI/OpenAPI-Specification/issues/2506))
- Should the API router logger sanitize urls that use `token` or
`access_token`? (This is obviously an insufficient solution on its own)
---------
Co-authored-by: delvh <dev.lh@web.de>
1. Do not sort the "checks" slice again and again when "Register", it
just wastes CPU when the Gitea instance runs
2. If a check doesn't exist, tell the end user
3. Add some tests
Before:
`TestOrg/testactions` does have commit status, but won't display in
`All`
After:
Same to #26179.
- Currently there's code to recover gracefully from panics that happen
within the execution of cron tasks. However this recover code wasn't
being run, because `RunWithShutdownContext` also contains code to
recover from any panic and then gracefully shutdown Forgejo. Because
`RunWithShutdownContext` registers that code as last, that would get run
first which in this case is not behavior that we want.
- Move the recover code to inside the function, so that is run first
before `RunWithShutdownContext`'s recover code (which is now a noop).
Fixes: https://codeberg.org/forgejo/forgejo/issues/1910
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
Should fix#28229 and #28230 for next release.
Assuming I'm reading the docs correctly for the docker meta action:
https://github.com/docker/metadata-action#flavor-inputhttps://github.com/docker/metadata-action#latest-tag
1. We want `latest=false` for the RCs.
2. `latest` should happen already due to `auto` mode, however there's an
extra option for the `suffix` flavor.
This PR is ready, but leaving it as draft to make sure someone
double-checks my sleuth-work.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix#28268 .
<img width="1313" alt="image"
src="cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix#28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
When we pick up a job, all waiting jobs should firstly be ordered by
update time,
otherwise when there's a running job, if I rerun an older job, the older
job will run first, as it's id is smaller.
- The RSS Feed icons were placed in a proper button, so that it does
not look "inconsistent". This also makes the problem of the button
being improperly aligned go away.
- The icon that shows on user profiles has not been modified because
of a lack of better implementation ideas.
- Where applicable, the RSS Feed icon was put directly next to the
Follow button (right menu), as both functionalities effectively
share the same purpose.
- Despite the attempt at achieving less inconsistency, a conscious
decision to not add any text to those buttons was made, opting for
tooltips instead. "Make it present, but not too annoying."
- A special exception was made for the Releases pages (which contains
text, not a tooltip), where an RSS feed would be particularly
beneficial to users.
The fact that the RSS functionality is explicitly optional was taken
into account, and these improvements were made with public-facing
instances (where the feature works best) in mind.
This resolves a problem I encountered while updating gitea from 1.20.4
to 1.21. For some reason (correct or otherwise) there are some values in
`repository.size` that are NULL in my gitea database which cause this
migration to fail due to the NOT NULL constraints.
Log snippet (excuse the escape characters)
```
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.573122395Z 2023/12/04 03:52:28 ...ations/migrations.go:641:Migrate() [I] Migration[263]: Add git_size and lfs_size columns to repository table
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.608705544Z 2023/12/04 03:52:28 routers/common/db.go:36:InitDBEngine() [E] ORM engine initialization attempt #3/10 failed. Error: migrate: migration[263]: Add git_size and lfs_size columns to repository table failed: NOT NULL constraint failed: repository.git_size
```
I assume this should be reasonably safe since `repository.git_size` has
a default value of 0 but I don't know if that value being 0 in the odd
situation where `repository.size == NULL` has any problematic
consequences.
The summary string ends up in the database, and (at least) MySQL &
PostgreSQL require valid UTF8 strings.
Fixes#28178
Co-authored-by: Darrin Smart <darrin@filmlight.ltd.uk>
Close#28287
## How to test it in local
convert Makefile L34 into:
```
cd .tmp/upstream-docs && git clean -f && git reset --hard && git fetch origin pull/28302/head:pr28302 && git switch pr28302
```
This fixes a regression from #25859
If a tag has no Release, Gitea will show a Link to create a Release for
the Tag if the User has the Permission to do this, but the variable to
indicate that is no longer set.
Used here:
1bfcdeef4c/templates/repo/tag/list.tmpl (L39-L41)
- Push commits updates are run in a queue and updates can come from less
traceable places such as Git over SSH, therefor add more information
about on which repository the pushUpdate failed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1723
(cherry picked from commit 37ab9460394800678d2208fed718e719d7a5d96f)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Previously only the first term had to be matched. That default
Meilisearch behavior makes sense for e.g. some kind of autocomplete to
find and select a single result. But for filtering issues it means you
can't narrow down results by adding more terms.
This is also more consistent with other indexers and GitHub.
---
Reference:
https://www.meilisearch.com/docs/reference/api/search#matching-strategy
The git command may operate the git directory (add/remove) files in any
time.
So when the code iterates the directory, some files may disappear during
the "walk". All "IsNotExist" errors should be ignored.
Fix#26765
- Say to the binding middleware which locale should be used for the
required error.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1683
(cherry picked from commit 5a2d7966127b5639332038e9925d858ab54fc360)
Co-authored-by: Gusted <postmaster@gusted.xyz>
- When crafting the OAuth2 callbackURL take into account `appSubUrl`,
which is quite safe given that its strictly formatted.
- No integration testing as this is all done in Javascript.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1795
(cherry picked from commit 27cb6b7956136f87aa78067d9adb5a4c4ce28a24)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fixes https://codeberg.org/forgejo/forgejo/issues/1759
If you are bowing another branch than the default branch and click n the
Code tab, it will take you to the root of the branch. The `BranchName`
variable is also set when viewing a Wiki commit, so we also need to
check if we are on a Wiki.
gitea doctor failed at checking and fixing 'delete-orphaned-repos',
because table name 'user' needs quoting to be correctly recognized by at
least PostgreSQL.
fixes#28199
https://gitea.com/gitea/gitea-docusaurus/actions/runs/661/jobs/0#jobstep-9-39
I noticed that there are many warning logs in building docs.
It is causing 404 in docs.gitea.com now, so we need to fix it.
And there are also some other problems in v1.19 which can not be done in
this PR.
ps: Are there any good methods to test this in local?
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit 631c87cc2347f0036a75dcd21e24429bbca28207)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Follow-up #22844close#28142
Before
After
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25473
Although there was `m.Post("/login/oauth/access_token", CorsHandler()...`,
it never really worked, because it still lacks the "OPTIONS" handler.
Reproduce:
- Create a new Gitea instance
- Register a runner
- Create a repo and add a workflow
- Check the log, you will see warnings:
It comes from:
The reason is that we forgot registering `ActionTaskOutput` model.
So `action_table_output` table will be missing in your db.
When the form is going to be submitted, add the "is-loading" class to
show an indicator and avoid user UI events.
When the request finishes (success / error), remove the "is-loading"
class to make user can interact the UI.
- Update all JS and PY dependencies minus `@mcaptcha/vanilla-glue`
- Adapt to eslint rule rename
- Regenerate all SVGs because of [new
optimizations](https://github.com/svg/svgo/releases/tag/v3.0.4) from
svgo.
- Tested mentions, mermaid, vue, api docs
I propose to decrease font size. 18 is too big and looks ugly, on
windows. 14 is on par with other elements and save a bit of space.
Co-authored-by: Nikolay Kobzarev <n.kobzarev@aeronavigator.ru>
When writing the release blog, it is really annoying and time-consuming
to re-discover and write down how a feature behaves and capture a
screenshot of it, for every single feature merged since the last
release.
This should not be the responsibility of maintainers, but rather of the
person implementing a feature in the first place.
They know best how to use the feature and how to gather screenshots for
it.
Similarly for breaking changes and their effects.
As such, let's require everything to be up-to-date and easily
understandable before merging features or breaking changes.
1. Show diff stats only on large screens
these are already shown in tabs, so no need for this duplicate
information on small screens
2. Hide viewed files information on small screens
Github does the same and this gives us more free space on small screens
3. Review bar now doesn't wrap so we don't need the 77px even on very
small screens
(the sticky headers are still working)
Hi,
This PR fixes#27988. The use of `path.join`(which uses `/` as the file
separator) to construct paths and comparing them with paths constructed
using `filepath.join`(which uses platform specific file separator) is
the root cause of this issue.
The desired behavior is to ignore attachments when dumping data
directory. Due to the what's mentioned above, the function
`addRecursiveExclude` is not actually ignoring the attachments directory
and is being written to the archive. The attachment directory is again
added to the archive (with different file separator as mentioned in the
issue) causing a duplicate entry on windows.
The solution is to use `filepath.join` in `addResursiveExclude` to
construct `currentAbsPath`.
Changed behavior to calculate package quota limit using package `creator
ID` instead of `owner ID`.
Currently, users are allowed to create an unlimited number of
organizations, each of which has its own package limit quota, resulting
in the ability for users to have unlimited package space in different
organization scopes. This fix will calculate package quota based on
`package version creator ID` instead of `package version owner ID`
(which might be organization), so that users are not allowed to take
more space than configured package settings.
Also, there is a side case in which users can publish packages to a
specific package version, initially published by different user, taking
that user package size quota. Version in fix should be better because
the total amount of space is limited to the quota for users sharing the
same organization scope.
Fixes some problems in #27955:
- autofocus of the search box
before:
if access the home page will jump to the search box
after:
will not jump to the search box
- incorrect display of overview tab
before:
after:
- improve the permission check to the private profile repo
In #26295, we simply added access control to the private profile.
But if user have access to the private profile repo , we should also
display the profile.
- add a button which can jump to the repo list?
I agree @wxiaoguang 's opinion here:
https://github.com/go-gitea/gitea/pull/27955#issuecomment-1803178239
But it seems that this feature is sponsored.
So can we add a button which can quickly jump to the repo list or just
move profile to the `overview` page?
---------
Co-authored-by: silverwind <me@silverwind.io>
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa24390116d31ae2507c0a93d423f690b7b)
Fixes https://codeberg.org/forgejo/forgejo/issues/1458
Some mails such as issue creation mails are missing the reply-to-comment
address. This PR fixes that and specifies which comment types should get
a reply-possibility.
## Bug in Gitea
I ran into this bug when I accidentally used the wrong redirect URL for
the oauth2 provider when using mssql. But the oauth2 provider still got
added.
Most of the time, we use `Delete(&some{id: some.id})` or
`In(condition).Delete(&some{})`, which specify the conditions. But the
function uses `Delete(source)` when `source.Cfg` is a `TEXT` field and
not empty. This will cause xorm `Delete` function not working in mssql.
61ff91f960/models/auth/source.go (L234-L240)
## Reason
Because the `TEXT` field can not be compared in mssql, xorm doesn't
support it according to [this
PR](https://gitea.com/xorm/xorm/pulls/2062)
[related
code](b23798dc98/internal/statements/statement.go (L552-L558))
in xorm
```go
if statement.dialect.URI().DBType == schemas.MSSQL && (col.SQLType.Name == schemas.Text ||
col.SQLType.IsBlob() || col.SQLType.Name == schemas.TimeStampz) {
if utils.IsValueZero(fieldValue) {
continue
}
return nil, fmt.Errorf("column %s is a TEXT type with data %#v which cannot be as compare condition", col.Name, fieldValue.Interface())
}
}
```
When using the `Delete` function in xorm, the non-empty fields will
auto-set as conditions(perhaps some special fields are not?). If `TEXT`
field is not empty, xorm will return an error. I only found this usage
after searching, but maybe there is something I missing.
---------
Co-authored-by: delvh <dev.lh@web.de>
To improve maintainability, this PR:
1. Rename `web_src/js/modules/aria` to `web_src/js/modules/fomantic`
(the code there are all for aria of fomantic)
2. Move api/transition related code to
`web_src/js/modules/fomantic/api.js` and
`web_src/js/modules/fomantic/transition.js`
No logic is changed.
Added the following characters to the regular expression for the email:
- ,
- ;
- ?
- !
Also added a test case.
- Fixes#27616
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
https://blog.gitea.com/release-of-1.20.0/#-user-profile-readme-23260
(#23260) did introduce Profile Readme for Users.
This makes it usable for Organisations:
---
*Sponsored by Kithara Software GmbH*
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Same as https://github.com/go-gitea/gitea/pull/26046 but for user
dashboard, the sidebar got a bit smaller and there is less padding
between sections.
<img width="1265" alt="image"
src="0c8d2faa-03ec-4515-a4f2-0a106ef2a928">
In #25315, @denyskon fixed UI on mobile view.
But for the repo description, on desktop view there's no word-break.
So maybe we can just add `gt-word-break` to fix it on both mobile view
and desktop view.
Before:
desktop view:
mobile view:
After:
desktop view:
mobile view(almost same?)
---------
Co-authored-by: silverwind <me@silverwind.io>
1. `linter.lang-version` is deprecated in favor of `run.go`
2. `run.go` defaults to the version in `go.mod` as per
[docs](https://golangci-lint.run/usage/configuration/#run-configuration):
```yaml
# Define the Go version limit.
# Mainly related to generics support since go1.18.
# Default: use Go version from the go.mod file, fallback on the env var `GOVERSION`, fallback on 1.18
go: '1.19'
```
So in summary, we don't need these versions in the file as long as we
keep the version in go.mod bumped.
When an assignee changed event comment is rendered, most of it is
guarded behind the assignee ID not being 0. However, if it is 0, that
results in quite broken rendering for that comment and the next one.
This can happen, for example, when repository data imported from outside
of Gitea is incomplete.
This PR makes sure comments with an assignee ID of 0 are not rendered at
all.
---
Screenshot before:
<img width="272" alt="Bildschirmfoto 2023-11-05 um 20 12 18"
src="7d629d76-fee4-4fe5-9e3a-bf524050cead">
The comments in this screenshot are:
1. A regular text comment
2. A user being unassigned
3. A user being assigned
4. The title of the PR being changed
Comments 2 and 3 are rendered without any text, which indents the next
comment and does not leave enough vertical space.
Co-authored-by: Giteabot <teabot@gitea.io>
The bug has been fixed for several months in the
`docker/build-push-action`
The fix commit is
[d8823bfaed](d8823bfaed)
as the Gitea Actions Doc mentioned too.
Before:
desktop view:
mobile view:
after click `Save` btn:
refresh the page, you will see that `gt-m-0` is missing after save
topic:
After:
desktop view:
mobile view:
after click `Save` btn:
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223dab054f7f760b7ccae69e745eebfabb)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Remove the "tabindex" from some form buttons on the "diff box" / "issue view content" page, let the browser use the default tab order.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The steps to reproduce it.
First, create a new oauth2 source.
Then, a user login with this oauth2 source.
Disable the oauth2 source.
Visit users -> settings -> security, 500 will be displayed.
This is because this page only load active Oauth2 sources but not all
Oauth2 sources.
Step one for a GitHub like commit status check ui:
Step two:
The design now will list all commit status checks which takes too much
space.
This is a pre-improve for #26247
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix nil access for inactive auth sources.
> Render failed, failed to render template:
user/settings/security/security, error: template error:
builtin(static):user/settings/security/accountlinks:32:20 : executing
"user/settings/security/accountlinks" at <$providerData.IconHTML>: nil
pointer evaluating oauth2.Provider.IconHTML
Code tries to access the auth source of an `ExternalLoginUser` but the
list contains only the active auth sources.
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
This PR adds a prefix path for all minio storage and override base path
will override the path.
The previous behavior is undefined officially, so it will be marked as
breaking.
After many refactoring PRs for the "locale" and "template context
function", now the ".locale" is not needed for web templates any more.
This PR does a clean up for:
1. Remove `ctx.Data["locale"]` for web context.
2. Use `ctx.Locale` in `500.tmpl`, for consistency.
3. Add a test check for `500 page` locale usage.
4. Remove the `Str2html` and `DotEscape` from mail template context
data, they are copy&paste errors introduced by #19169 and #16200 . These
functions are template functions (provided by the common renderer), but
not template data variables.
5. Make email `SendAsync` function mockable (I was planning to add more
tests but it would make this PR much too complex, so the tests could be
done in another PR)
From issue https://github.com/go-gitea/gitea/issues/27314
When act_runner in `host` mode on Windows. `upload_artifact@v3` actions
use `path.join` to generate `itemPath` params when uploading artifact
chunk. `itemPath` is encoded as `${artifact_name}\${artifact_path}`.
<del>It's twice query escaped from ${artifact_name}/${artifact_path}
that joined by Windows slash \.</del>
**So we need convert Windows slash to linux**.
In https://github.com/go-gitea/gitea/issues/27314, runner shows logs
from `upload_artifact@v3` like with `%255C`:
```
[artifact-cases/test-artifact-cases] | ::error::Unexpected response. Unable to upload chunk to 34d628a422/upload
```
But in gitea server at the same time, But shows `%5C`
```
2023/10/27 19:29:51 ...eb/routing/logger.go:102:func1() [I] router: completed PUT /api/actions_pipeline/_apis/pipelines/workflows/6/artifacts/34d628a422db9367c869d3fb36be81f5/upload?itemPath=more-files%5Css.json for 192.168.31.230:55340, 400 Bad Request in 17.6ms @ <autogenerated>:1(actions.artifactRoutes.uploadArtifact-fm)
```
I found `%255C` is escaped by
`https://github.com/actions/upload-artifact/blob/main/dist/index.js#L2329`.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Starting from #25790 this shared template only linked the username of
the user if both display name and username were shown. I experienced
myself always trying to click on the display name - I think it is
annoying for others too.
After:
Follow #26363.
I missed that org templates also using
`templates/user/overview/header.tmpl`.
You can confirm this problem in https://gitea.com/gitea/-/projects with
anonymous access.
Before: (no login)
After:
Currently this feature is only available to admins, but there is no
clear reason why. If a user can actually merge pull requests, then this
seems fine as well.
This is useful in situations where direct pushes to the repository are
commonly done by developers.
---------
Co-authored-by: delvh <dev.lh@web.de>
Due to a bug in the GitLab API, the diff_refs field is populated in the
response when fetching an individual merge request, but not when
fetching a list of them. That field is used to populate the merge base
commit SHA.
While there is detection for the merge base even when not populated by
the downloader, that detection is not flawless. Specifically, when a
GitLab merge request has a single commit, and gets merged with the
squash strategy, the base branch will be fast-forwarded instead of a
separate squash or merge commit being created. The merge base detection
attempts to find the last commit on the base branch that is also on the
PR branch, but in the fast-forward case that is the PR's only commit.
Assuming the head commit is also the merge base results in the import of
a PR with 0 commits and no diff.
This PR uses the individual merge request endpoint to fetch merge
request data with the diff_refs field. With its data, the base merge
commit can be properly set, which—by not relying on the detection
mentioned above—correctly imports PRs that were "merged" by
fast-forwarding the base branch.
ref: https://gitlab.com/gitlab-org/gitlab/-/issues/29620
Before this PR, the PR migration code populates Gitea's MergedCommitID
field by using GitLab's merge_commit_sha field. However, that field is
only populated when the PR was merged using a merge strategy. When a
squash strategy is used, squash_commit_sha is populated instead.
Given that Gitea does not keep track of merge and squash commits
separately, this PR simply populates Gitea's MergedCommitID by using
whichever field is present in the GitLab API response.
Some translations are duplicated for the same package fields; it should
be possible to use the same approach. Checked packages to use the same
forms in templates.
1. Removed repeated translations for the same fields
2. Linked template files to the same translation fields
3. Added repository site link for nuget packages
* Show checkout instructions also when there is no permission to push,
for anyone who wants to locally test the changes.
* First checkout the branch exactly as is, without immediately having to
solve merge conflicts. Leave this to the merge step, since it's often
convenient to test a change without worrying about this.
* Use `git fetch -u`, so an existing local branch is updated when
re-testing the same pull request. But not the more risky `git fetch -f`
in to handle force pushes, as we don't want to accidentally overwrite
important local changes.
* Show different merge command depending on the chosen merge style,
interactively updated.
See https://github.com/go-gitea/gitea/pull/27718#issuecomment-1773743014
. Add a test to ensure its behavior.
Why this test uses `ProjectBoardID=0`? Because in `SearchOptions`,
`ProjectBoardID=0` means what it is. But in `IssueOptions`,
`ProjectBoardID=0` means there is no condition, and
`ProjectBoardID=db.NoConditionID` means the board ID = 0.
It's really confusing. Probably it's better to separate the db search
engine and the other issue search code. It's really two different
systems. As far as I can see, `IssueOptions` is not necessary for most
of the code, which has very simple issue search conditions.
This PR will show the _noreply_ address in the privacy popup
_keep_email_private_popup_.
I had to look into the source code to figure out which E-Mail Adress I
had to use on gitea.com to hide it from public access.
According to the contribution guidelines I only updated the en-US
translation file.
Co-authored-by: Hakito <hakito@git.example.com>
## Add border to file tree 'sub-items'
close#24766
view in `gitea-light`
<img width="275" alt="image"
src="f1bf8736-2db3-454f-86f5-d050a2fae3eb">
view in `gitea-dark`
<img width="296" alt="image"
src="053e2e6e-28f7-41d2-a139-1dae4df45929">
## Change the 'item-file' padding
Before that the 'item-file' only have padding when they in
'item-directory', which is too compact when 'item-file' after
'item-directory'
<details>
---------
Co-authored-by: silverwind <me@silverwind.io>
When 0 or 1 files changed in a diff, we don't need to show a file tree.
This behaviour matches GitHub. Single-file diff after this change, note
absence of button:
<img width="1234" alt="image"
src="3618438b-e655-42a3-989f-f299267b2b8b">
Co-authored-by: Giteabot <teabot@gitea.io>
Before (almost no gap between files):
<img width="1240" alt="Screenshot 2023-10-24 at 19 43 32"
src="30cdbdbc-d102-479c-89ce-3f68837ae0cd">
After (with 8px gap):
<img width="1241" alt="Screenshot 2023-10-24 at 19 43 22"
src="72b26a30-8730-4a36-8de9-be143b684b98">
Hello there,
Cargo Index over HTTP is now prefered over git for package updates: we
should not force users who do not need the GIT repo to have the repo
created/updated on each publish (it can still be created in the packages
settings).
The current behavior when publishing is to check if the repo exist and
create it on the fly if not, then update it's content.
Cargo HTTP Index does not rely on the repo itself so this will be
useless for everyone not using the git protocol for cargo registry.
This PR only disable the creation on the fly of the repo when publishing
a crate.
This is linked to #26844 (error 500 when trying to publish a crate if
user is missing write access to the repo) because it's now optional.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
- The label HTML contained a quote that wasn't being closed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1651
(cherry picked from commit e2bc2c9a1fff482c49dbeb3a51e4e1c698bf506c)
Co-authored-by: Gusted <postmaster@gusted.xyz>
When hitting the `enter` key to create a new project column, the request
is sent twice because the `submit` event and `key up` event are both
triggered.
Probably a better solution is to rewrite these parts of the code to
avoid using native jQuery but reuse the `form-fetch-action` class. But
it's beyond my ability.
Per the discussion on #22054, the flow for adding a new team member to
an org is not intuitive for new Gitea users.
The ideal solution would be to add a new button on the Org > Members
index view (see the screenshot mockup in the issue description).
However, this would require a refactor of the UX for the flow. The
current flow has an implicit context of which team within the org the
new member is being added to ('Owners' by default). From the Members
index, there is no implicit context; the flow would have to add a picker
for which team the new member should be added to.
So, as a stopgap, this change simply adds a button to the Teams index
page that performs the same action as clicking on the title of the team
(a behavior that is currently too obscure as indicated in the comments
on the issue). This should reduce support burden and serve as a decent
temporary measure until the Add Member flow is refactored.
---------
Co-authored-by: tomholford <tomholford@users.noreply.github.com>
The current language stats are too obsessed with color matching. Similar
colors are always next to each other. It is a bit troublesome to find
the place where the color matching is generated, so just follow the
example of github and add a gap.
## before
<img width="883" alt="image"
src="cf54430c-616c-4b37-b561-5a37c20b2d94">
## after
<img width="877" alt="image"
src="e518ea36-2b8f-4f11-a867-a58dc393db85">
Fixes: https://github.com/go-gitea/gitea/issues/27604
Add negative margins so the header covers any shadow of active elements.
No rendering change of the content of the header because the padding
counteracts the effect.
<img width="128" alt="image"
src="3d0f55b6-9351-4985-a290-da9a92d15b4e">
1. remove unused function `MoveIssueAcrossProjectBoards`
2. extract the project board condition into a function
3. use db.NoCondition instead of -1. (BTW, the usage of db.NoCondition
is too confusing. Is there any way to avoid that?)
4. remove the unnecessary comment since the ctx refactor is completed.
5. Change `b.ID != 0` to `b.ID > 0`. It's more intuitive but I think
they're the same since board ID can't be negative.
TODOs:
- [x] write test for `GetIssueTotalTrackedTime`
- [x] frontport kitharas template changes and make them mobile-friendly
---
---
*Sponsored by Kithara Software GmbH*
If you set a checkbox as required in a issue form at the moment, the
checkbox is checked and read only, what does not make much sense. With
this PR, the Checkbox actually needs to be checked. The label supports
now also Markdown. This matches GitHub's behaviour.
And yes, I know the CSS is a ugly workaround. It looks like the given
CSS code is part Fomantic and I don't know how to change that. The
Maintainers are free to change that.
See [issue on
gitea.com](https://gitea.com/gitea/gitea-docusaurus/issues/38), copied
below for convenience:
> Hello, may I first confirm that the app.ini PROTOCOL config is case
sensitive (must be lowercase)?
>
> If so, I'd like to suggest for it to be highlighted in the [HTTPS
Setup](https://docs.gitea.com/administration/https-setup#using-the-built-in-server)
page.
> Perhaps something like:
> For the PROTOCOL=https field, make sure https is lowercase. Writing
PROTOCOL=HTTPS may result in a SSL_ERROR_RX_RECORD_TOO_LONG error on
Firefox or ERR_SSL_PROTOCOL_ERROR on Chrome and Edge.
>
> Background
> At first I carelessly wrote PROTOCOL=HTTPS in my app.ini, and Firefox
didn't allow me to connect because:
> Secure Connection Failed
> An error occurred during a connection to gitea.local.lan. SSL received
a record that exceeded the maximum permissible length.
> Error code: SSL_ERROR_RX_RECORD_TOO_LONG
> I spent maybe half an hour troubleshooting my certs, ports, and other
configs before backtracking to the start and realizing the
capitalization difference there 😅. When I changed that config to
lowercase, it worked.
For this PR I added the note in the Config Cheat Sheet page and fixed
the links to it from the HTTPS Setup page.
Was originally thinking to put the note in the HTTPS Setup page itself,
but since there are 2 sections referencing the PROTOCOL config, I was
thinking it'd be neater and more concise to put it in the Config Cheat
Sheet page instead. Especially since both sections already link to it,
and I actually tried to check that link quite early on in my
troubleshooting (but didn't pay much attention to it since the link was
broken).
## Before/After screenshots as per [this repo's
docs](https://github.com/go-gitea/gitea/tree/main/docs)
Before - links
Note: For this the links weren't broken, the links fix is because they
were broken on gitea.com's docs (see below).
After - links
Before - config cheat sheet
After - config cheat sheet
## Before/After screenshots as per [gitea.com's
docs](https://gitea.com/gitea/gitea-docusaurus)
Before - links
After - links
Before - config cheat sheet
After - config cheat sheet
this allows to deep link to the readme section of a repository.
fixes#27641
Screenshots:
No changes on initial display:
On hover the link is shown:
1. Do not show temporary tooltips that are triggered from within
dropdowns. Previously this resulted in the tooltip being stuck to
top-left of the page like seen on issue comment URL copy. I could not
figure out any tippy options that prevent this, so I think it's better
to just not show it.
1. Refactor `initGlobalCopyToClipboardListener` so that it does not run
a often useless `document.querySelector` on every click, make
`data-clipboard-text-type` work with `data-clipboard-target`. No use in
current code base but still good to have. Finally some minor code
cleanup in the function.
Point 1 is for this copy button:
<img width="229" alt="image"
src="81f34746-8ea5-43d9-8c6f-f6f417a9e4ad">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
When `webhook.PROXY_URL` has been set, the old code will check if the
proxy host is in `ALLOWED_HOST_LIST` or reject requests through the
proxy. It requires users to add the proxy host to `ALLOWED_HOST_LIST`.
However, it actually allows all requests to any port on the host, when
the proxy host is probably an internal address.
But things may be even worse. `ALLOWED_HOST_LIST` doesn't really work
when requests are sent to the allowed proxy, and the proxy could forward
them to any hosts.
This PR fixes it by:
- If the proxy has been set, always allow connectioins to the host and
port.
- Check `ALLOWED_HOST_LIST` before forwarding.
The ui of list header in milestone page is not same as issue and pr list
page.
And they are using different template codes which can be merged into
one.
Before:
After:
---------
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
- The review type '22' is a general comment type that is attached to
single codecomments, reviews with multiple comments or to simple approve
and request changes comment. This comment can be used to create a link
towards this action on an pull request.
- Adds an anchor to the review comment type, so that when its getting
linked to it, it actually jumps towards that event.
- This also now fixes the behavior that after you created a review you
will be redirected to that review and because this is an general comment
type other mails will also be 'fixed' such as the approved or request
changes.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1248
(cherry picked from commit 1741a5f1fe6adc68bb5f87bdd1c5bdc5bfaa45c7)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds unit tests
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
1. `make build` fails because `||` and `&&` have the same precedence in
sh/bash, so the `false` command always evaluated (leading to an error).
```
+ which gmake /usr/local/bin/gmake
+ false
*** Failed target: .BEGIN
*** Failed command: which "gmake" || printf "Error: GNU Make is
required!\n\n" 1>&2 && false
*** Error code 1
```
2. When `GPREFIX` is set to an empty string with quotation marks,
`gmake` mistakenly thinks that it's a file name:
``` gmake: *** empty string invalid as file name. Stop. ```
1. Dropzone attachment removal, pretty simple replacement
2. Image diff: The previous code fetched every image twice, once via
`img[src]` and once via `$.ajax`. Now it's only fetched once and a
second time only when necessary. The image diff code was partially
rewritten.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac1408ece6b7d9fe6a76501ed9a45d06fa)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
Fix #27541
The INI package has a quirk: by default, the keys are inherited.
When maintaining the keys, the newly added sub key should not be
affected by the parent key.
Follow #27354
Major changes:
1. The `right aligned` in `<th class="one wide right aligned">` is a
no-op because it doesn't have any content
2. The `gt-df` in `<td class="sha gt-df">` was wrong, it causes UI
misalignment, a table cell shouldn't be "flex"
3. Use `gt-py-0` for `gt-pt-0 gt-pb-0`
4. Simplify the layout for buttons, because the `text right aligned` is
widely used and good enough, it doesn't make sense to introduce the
`<div class="gt-df gt-je">`
5. Escape the `$.FileName` correctly
Before:
After:
This script was trying to be too smart, make it more straightforward and
less error-prone so that i could be used by the backport bot too
ideally.
- Always delete the backport branch so that script is idempotent in this
regard
- Remove the push functionality, it's best done by the user because only
they know the remote name
- Remove reading docs/config.yaml, it no longer exists
- Remove version detection, version is now a required argument
- Remove opening the pull request with xdg-open, xdg-open is not
portable
- Remove continue from failed cherry pick. It's best to reset manually
in this case
- Clean up the console logging
Example run:
```
$ go run ./contrib/backport --version v1.21 27503
* Backporting 27503 to origin/release/v1.21 as backport-27503-v1.21
* `git fetch origin main`
* `git fetch origin release/v1.21`
* `git branch -D backport-27503-v1.21`
* `git checkout -b backport-27503-v1.21 origin/release/v1.21`
* Attempting git cherry-pick 08efeb5cdc
* Amending commit to prepend `Backport #27503` to body
Backport done! You can now push it with `git push yourremote backport-27503-v1.21`
```
---------
Co-authored-by: delvh <dev.lh@web.de>
Alternative to https://github.com/go-gitea/gitea/pull/27439. Removes a
few spammy labels, and disables `sync-labels` which make it never remove
labels (which is default behaviour).
This patch adds a hover background for the wiki row in wiki list page,
which make its behavior more close to repo's file list page.
This patch also make the wiki-git-entry visible on the row is hovered
instead of the cel, so users won't be confused since the 'grid' is not
visible from the web page.
After the patch: (when the wiki named 'Home' is hovered)
- Update all JS and PY dependencies
- Enable eslint `prefer-object-has-own` and autofix issue
- Fix styling on citation buttons
- Tested citation, mermaid, monaco, swagger, katex
Citation button issue was that these buttons were not filled:
<img width="136" alt="Screenshot 2023-10-07 at 14 05 08"
src="435f0c91-28ac-46b3-bae4-dad768b29c05">
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Duplicate headers in a single Markdown document are problemlematic
because the auto-generated links won't be stable. Enable this rule with
no exceptions which is also the default of `markdownlint`. For example:
```md
# A
## Example
# B
## Example
```
Docasaurus will generated `example` and `example-1` links for this. If
the first heading is altered, the link `example` will unexpectedly move
to the second example heading.
Ref: https://github.com/go-gitea/gitea/pull/27461#discussion_r1347987659
When compiling GItea for Linux on Windows, you get a `gitea.exe` file as
output, but because it's a Linux executable, the `.exe` extension is
unnecessary.
This PR adds a check for `GOOS` environment variable in addition to
`OS`.
I'm temporarily unable to properly evaluate actuated runners, and so I'm
switching back to hosted runners until I am able to focus on that again.
---------
Co-authored-by: silverwind <me@silverwind.io>
If user only changed the target branch or just did nothing and clicked
the `Save` button, you will see the change log as following:
This makes no sense, so we should check whether the title is surely
changed before run the `ChangeTitle`.
storageHandler() is written as a middleware but is used as an endpoint
handler, and thus `next` is actually `nil`, which causes a null pointer
dereference when a request URL does not match the pattern (where it
calls `next.ServerHTTP()`).
Example CURL command to trigger the panic:
```
curl -I "http://yourhost/gitea//avatars/a"
```
Fixes#27409
---
Note: the diff looks big but it's actually a small change - all I did
was to remove the outer closure (and one level of indentation) ~and
removed the HTTP method and pattern checks as they seem redundant
because go-chi already does those checks~. You might want to check "Hide
whitespace" when reviewing it.
Alternative solution (a bit simpler): append `, misc.DummyOK` to the
route declarations that utilize `storageHandler()` - this makes it
return an empty response when the URL is invalid. I've tested this one
and it works too. Or maybe it would be better to return a 400 error in
that case (?)
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
Same as https://github.com/go-gitea/gitea/pull/26046 but for repo and
org settings pages, reducing the margins between the boxes:
<img width="1247" alt="Screenshot 2023-10-03 at 23 25 19"
src="4e68ad5e-5fdc-4466-aefb-ec71bf411d45">
<img width="1255" alt="Screenshot 2023-10-03 at 23 27 12"
src="9068369b-a75d-401e-8b8d-3bd4bbe097dc">
Co-authored-by: Giteabot <teabot@gitea.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Previously, if you had both a push and a pull mirror, the message did
not clarify if you've accidentally synchronized the wrong one.
Additionally fixed two typos that were encountered while debugging.
## Screenshots
- There's no need for `In` to be used, as it's a single parameter that's
being passed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1521
(cherry picked from commit 4a4955f43ae7fc50cfe3b48409a0a10c82625a19)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Hello, it seems that one my previous PR (adding the sparse index to the
cargo package content page), did not worked as expected: the
gitea-origin-url does not add the AppURL because of the `sparse+` prefix
in the url.
Currently the rendered page gives the following:
```toml
[registry]
default = "gitea"
[registries.gitea]
index = "sparse+/api/packages/ownername/cargo/" # Sparse index
# index = "https://git.example.com/ownername/_cargo-index.git" # Git
[net]
git-fetch-with-cli = true
```
Followup https://github.com/go-gitea/gitea/pull/26820
## Archived labels UI for issue filter and issue filter actions for
issues/pull request pages.
Changed:
* Enhanced the Issue filter and Issue filter actions UI page to
seamlessly incorporate a list of archived labels.
* Pagination functionality is same as before. If archived label checkbox
is checked then we are adding a query string`archived=true` in the url
to save the state of page.
* Issue filter actions menu is separated into different template.
* Adding the archived flag in issue url labels.
* Pull Request page is also work the same.
Outsourced:
* Defer the implementation of specialized handling for archived labels
to upcoming pull requests. This step will be undertaken subsequent to
the successful merge of this pull request.
Screenshots
### Issue page
<img width="1360" alt="image"
src="d7efb2ef-5b2b-449d-83f0-d430a32ec432">
### Issue page with label filter on archived label checkbox when not
checked --> No archived label is there in list
<img width="1249" alt="image"
src="ceea68ef-91f2-4693-910f-2e25e236bfc9">
### Issue page with label filter on archived label checkbox when checked
--> Show archived label in the list.
<img width="710" alt="image"
src="2414d26b-2079-4c3c-bd9e-f2f5411bcabf">
### Issue page with label filter on issue action menu on archived label
checkbox when checked --> Show archived label in the list.
<img width="409" alt="image"
src="259cac87-3e21-4778-99a2-a6a0b8c81178">
### Applied the archived=true in Issue labels when archived checkbox is
checked.
<img width="984" alt="image"
src="657ce3db-c0ae-402e-b12d-3b580d3c2ed0">
---
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Signed-off-by: puni9869 <punitinani1@hotmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
When the user does not set a username lookup condition, LDAP will get an
empty string `""` for the user, hence the following code
```
if isExist, err := user_model.IsUserExist(db.DefaultContext, 0, sr.Username)
```
The user presence determination will always be nonexistent, so updates
to user information will never be performed.
Fix#27049
Various improvements related to feeds:
- Fix markdown rendering
- Increase font size from 13px to default 14px via `flex-item`
- Add style to hashes
- Move the timestamp to title line. I realize it's not optimal for
translation, we may need to change all these translations
Before:
<img width="768" alt="Screenshot 2023-09-29 at 22 52 58"
src="edda8b84-23cf-4a43-90ad-a892798f4e6c">
After:
<img width="781" alt="Screenshot 2023-09-29 at 22 58 09"
src="7097474d-efcf-4f22-a2ab-834a4e25c4e8">
Currently, checkboxes are positioned as absolute. This positioning
causes the input to overlay an element that has been floated within the
editor. Floated elements are useful if you want your text to wrap around
this element. This PR fixes the overlaying of checkboxes by removing the
absolute positioning, updating the `ul` padding, and
displaying`.task-list-item` `flex` to ensure inputs and the associated
label are on the same line.
Screenshots:
Before:
<img width="762" alt="Screenshot 2023-09-01 at 3 40 59 PM"
src="570247c7-7f5c-4697-bfc9-ad4655e37991">
After:
<img width="762" alt="Screenshot 2023-09-01 at 3 42 20 PM"
src="db53df45-1294-4eee-84c0-b21ac4fdf805">
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
Only in org action settings, repo count is missing
Before:
In other setting page:
After:
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Follow #23465 and #25624
This PR introduces the following improvements:
- We do not need to call `GetTags` to get tags because tags have been
loaded by `RepoAssignment`
ef90fdbd1d/modules/context/repo.go (L663-L668)
- Similarly, the number of tags and releases also have been loaded by
`RepoAssignment`, so the related code has been removed from the
handlers. The query condition of `GetReleaseCountByRepoID` in
`RepoAssignment` has been changed to include draft releases.
ef90fdbd1d/modules/context/repo.go (L538-L551)
- `releasesOrTags` function has been removed. The code for rendering
releases list and tags list moved to `Releases` and `TagList`
respectively.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
Close#26730
1. The `diff-detail-box` was abused, it shouldn't be used for
"DiffFileList/DiffFileTree".
2. Fix the sticky position for various screens.
Fix#27313 (see the comment)
And some UI improvements:
### Before
### After
1. Put the `"octicon-shield-lock"` into the flex container, then it
doesn't need a separate flex box
2. Remove some unnecessary `gt-df` helpers
3. Make `btn` button has the same flex behavior as `ui button`
- Modify the deleted branch orphan check to check for the new table
instead.
- Regression from 6e19484f4d
- Resolves https://codeberg.org/forgejo/forgejo/issues/1522
(cherry picked from commit c1d888686fe445e4edecb9d835c5b3893b574b75)
Co-authored-by: Gusted <postmaster@gusted.xyz>
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Partially Fix#25041
This PR redefined the meaning of column `is_active` in table
`action_runner_token`.
Before this PR, `is_active` means whether it has been used by any
runner. If it's true, other runner cannot use it to register again.
In this PR, `is_active` means whether it's validated to be used to
register runner. And if it's true, then it can be used to register
runners until it become false. When creating a new `is_active` register
token, any previous tokens will be set `is_active` to false.
Previously, the production build never output sourcemaps. Now we emit
one file for `index.js` because it is the most likely one where we need
to be able to better debug reported issues like
https://github.com/go-gitea/gitea/issues/27213. This will currently
increase the binary size of gitea by around 700kB which is what the
gzipped source map file has.
Also, I fixed the CSS sourcemap generation which was broken since the
introduction of lightningcss.
These buttons are now disabled when the webhook is not active.
The buttons were always enabled before this change.
- Fixes#26824
- Replaces #26814
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
It seems that `Public` user visibility is missing in the template.
Before:
After:
The `.new-menu` was using a pseudo-element based fade-out effect.
Replace this with a more modern mask-based effect which in this case
required a child element to avoid fading out the background as well, so
I applied it to child `new-menu-inner` which was present on all these
menus except explore where I added it.
There is no visual difference except that the items on the explore page
have no `gap` between them any longer, making it consistent with other
menus. Before and after:
<img width="221" alt="Screenshot 2023-09-21 at 21 13 19"
src="b4a38ce2-cee1-4c54-84a5-e1d0bfd79e29">
<img width="222" alt="Screenshot 2023-09-21 at 21 32 36"
src="bb6b1335-d935-4ad4-bb85-3b0fc3027c2b">
Also, this cleans up the related CSS vars:
- `--color-header-wrapper-transparent` is removed, no longer needed
- `--color-header-wrapper` is defined in base theme as well, was
previously unset and therefor transparent.
[no whitespace
diff](https://github.com/go-gitea/gitea/pull/27181/files?diff=unified&w=1)
[demo of mask fade](https://jsfiddle.net/silverwind/tsfadb3u/)
Fixes https://github.com/go-gitea/gitea/issues/27136.
This does the following for Monaco's EOL setting:
1. Use editorconfig setting if present
2. Use the file's dominant line ending as detected by monaco, which uses
LF for empty file
- switch from some weird status badge to label
- translate untranslated `Reset registration token` string
- change documentation link from act_runner README to Gitea Docs site
- fix "No runners available" message width
- use `ctx.Locale.Tr` where possible
I noticed, that the push mirrors endpoint, is the only endpoint which
returns the times in long format rather than as time.Time().
I think the behavior should be consistent across the project.
----
## ⚠️ BREAKING ⚠️
This PR changes the time format used in API responses for all
push_mirror endpoints which return a push mirror.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all JS and Poetry dependencies
- Remove deprecated `eslint-plugin-custom-elements` and replace it with
rules from `eslint-plugin-wc`
- Add a convenience `make update` to update both js and py dependencies
- Tested markdown toolbar, swagger and citation
fix#27019
## testfixture yml
1. add issue20(a pr issue) in repo 23, org 17
2. add user15 to team 9
3. add four reviews about issue20
## test case
add two tests that are described with code comments
the code before pr #26784 failed the first test
<img width="479" alt="image"
src="1d9b5787-11b4-4c4d-931f-6a9869547f35">
current code failed the second test(as mentioned in #27019)
<img width="484" alt="image"
src="05608055-7587-43d1-bae1-92c688270819">
Any advice is appreciated.
---------
Co-authored-by: CaiCandong <50507092+CaiCandong@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This fixes a performance bottleneck. It was discovered by Codeberg.
Every where query on that table (which has grown big over time) uses
this column, but there is no index on it.
See this part of the log which was posted on Matrix:
```
2023/09/10 00:52:01 ...rs/web/repo/issue.go:1446:ViewIssue() [W] [Slow SQL Query] UPDATE `issue_user` SET is_read=? WHERE uid=? AND issue_id=? [true x y] - 51.395434887s
2023/09/10 00:52:01 ...rs/web/repo/issue.go:1447:ViewIssue() [E] ReadBy: Error 1205 (HY000): Lock wait timeout exceeded; try restarting transaction
2023/09/10 00:52:01 ...eb/routing/logger.go:102:func1() [I] router: completed GET /Codeberg/Community/issues/1201 for [::ffff:xxx]:0, 500 Internal Server Error in 52384.2ms @ repo/issue.go:1256(repo.ViewIssue)
```
Beginning since 2af30f715e, Gitea has a
500 error when visiting a user profile with `?tab=overview` in the URL
when the user doesn't have a `.profile/README.md`, because the backend
code assumes that if the tab is overview a profile repository must
exist, and checks that the repository is nil aren't done.
In this PR I treat `?tab=overview` the same as if no tab is set in the
URL, which corrects this behaviour- Now, when visiting `?tab=overview`,
if `.profile/README.md` exists on that user's profile it'll show that as
it should, otherwise it'll show the repositories tab.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Use the correct total amount for pagination. Thereby correctly show
the pagination bare when there's more than one page of
followers/followings.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1477
(cherry picked from commit c1a136318be3bf72511bed108f2d67f2cf34e1b8)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Refs: https://codeberg.org/forgejo/forgejo/pulls/1385
Signed-off-by: Lars Lehtonen <lars.lehtonen@gmail.com>
(cherry picked from commit 589e7d346f51de4a0e2c461b220c8cad34133b2f)
Co-authored-by: Lars Lehtonen <lars.lehtonen@gmail.com>
WIP because:
- [x] Some calls set a `content-type` but send no body, can likely
remove the header
- [x] Need to check whether `charset=utf-8` has any significance on the
webauthn calls, I assume not as it is the default for json content.
- [x] Maybe `no-restricted-globals` is better for eslint, but will
require a lot of duplication in the yaml or moving eslint config to a
`.js` extension.
- [x] Maybe export `request` as `fetch`, shadowing the global.
I think it's better if the primary actions have primary color instead of
green which fits better into the overall single-color UI design. This PR
currently replaces every green button with primary:
<img width="141" alt="Screenshot 2023-09-16 at 14 07 59"
src="843c1e50-4fb2-4ec6-84ba-0efb9472dcbe">
<img width="161" alt="Screenshot 2023-09-16 at 14 07 51"
src="9442195a-a3b2-4a42-b262-8377d6f5c0d1">
Modal actions now use uncolored/primary instead of previous green/red
colors. I also removed the box-shadow on all basic buttons:
<img width="259" alt="Screenshot 2023-09-16 at 14 16 39"
src="5beea529-127a-44b0-8d4c-afa7b034a490">
<img width="261" alt="Screenshot 2023-09-16 at 14 17 42"
src="4757f7b2-4d46-49bc-a797-38bb28437b88">
The change currently includes the "Merge PR" button, for which we might
want to make an exception to match the icon color there:
<img width="442" alt="Screenshot 2023-09-16 at 14 33 53"
src="993ac1a5-c94d-4895-b76c-0d872181a70b">
Fix the bug on try.gitea.io
```log
2023/09/18 01:48:41 ...ations/migrations.go:635:Migrate() [I] Migration[276]: Add RemoteAddress to mirrors
2023/09/18 01:48:41 routers/common/db.go:34:InitDBEngine() [E] ORM engine initialization attempt #7/10 failed. Error: migrate: migration[276]: Add RemoteAddress to mirrors failed: exit status 128 - fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
- fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
```
Caused by #26952
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Regression of #26713
After #26713 , the base path of user edit has been changed to
`/admin/users/{userid}/edit`
## Before
5f4a3f64-fe2b-4499-b110-e01c9d87ea19
- Refactor lfs request code
- The original code uses `performRequest` function to create the
request, uses a callback to modify the request, and then send the
request.
- Now it's replaced with `createRequest` that only creates request and
`performRequest` that only sends the request.
- Reuse `createRequest` and `performRequest` in `http_client.go` and
`transferadapter.go`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
As title
From the long time I was looking for this UI, Now its the time to fix
it.
Before
<img width="252" alt="image"
src="963f2cb4-5cfd-4a14-ab85-88e25c3daef5">
<img width="502" alt="image"
src="58453ef1-2555-4568-95d0-5293055b33b8">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
The `docs` and `yaml` actions categories need to run when the
dependencies `markdownlin-cli` or `yamllint` change, so add those to the
list of dependencies for these actions.
Fixes: https://github.com/go-gitea/gitea/issues/27098
- Drop Node.js 16 since it reached EOL
- Upgrade js dependencies
- Two packages have major version bump
- `updates`: require node 18
- `eslint-plugin-array-func`: require `eslint` 8.40.0, which is
satisfied
- Run `make svg` for `@primer/octicons` update
As described in the title.
Some points:
1. Why need those tests?
Because `buildIssueOverview` is not well tested, there are several
continuous bugs in the issue overview webpage.
2. Why in indexer_test.go?
It's hard to put those tests in `./modules/indexer/issue/db/db_test.go`
because those tests need 'real' data in db mocked by fixtures instead of
random data in `./modules/indexer/issue/internal/tests`. When using
'real' data(`unittest.PrepareTestDatabase`), `InitIssueIndexer` and the
package `init()` function of `indexer` are required to init indexer.
3. Why only db?
The other three indexer engines are well tested by random data and it's
okay to also test them with 'real' data in db mocked by fixtures. Any
follow-up PR is welcome.
4. Those tests are really basic, any more complicated tests are welcome.
5. I think it's also necessary to add tests in `TestAPISearchIssues`
in`api_test_issue.go` and `TestIssues` in `home_test.go`
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Since the issue indexer has been refactored, the issue overview webpage
is built by the `buildIssueOverview` function and underlying
`indexer.Search` function and `GetIssueStats` instead of
`GetUserIssueStats`. So the function is no longer used.
I moved the relevant tests to `indexer_test.go` and since the search
option changed from `IssueOptions` to `SearchOptions`, most of the tests
are useless now.
We need more tests about the db indexer because those tests are highly
connected with the issue overview webpage and now this page has several
bugs.
Any advice about those test cases is appreciated.
---------
Co-authored-by: CaiCandong <50507092+CaiCandong@users.noreply.github.com>
Currently 'userxx' and 'orgxx' are both used as username in test files
when the user type is org, which is confusing. This PR replaces all
'userxx' with 'orgxx' when the user type is org(`user.type==1`).
Some non-trivial changes
1. Rename `user3` dir to `org3` in `tests/git-repositories-meta`
2. Change `end` in `issue reference` because 'org3' is one char shorter
than 'user3'
3. Change the search result number of `user/repo2` because
`user3/repo21` can't be searched now
4. Change the first org name getting from API because the result is
ordered by alphabet asc and now `org 17` is before `org25`
Other modifications are just find all and replace all.
Unit tests with SQLite are all passed.
---------
Co-authored-by: caicandong <1290147055@qq.com>
Before:
After:
---
1. **Remove the scroll bar exception that in the a tag**
2. **Reduce the actual width of the a tag to the actual width of the
content**
As shown in the screenshot, the red box area should not be clickable
- In org mode you can specify an description for media via the following
syntax `[[description][media link]]`. The description is then used as
title or alt.
- This patch fixes the rendering of the description by seperating the
description and non-description cases and using `org.String()`.
- Added unit tests.
- Inspired by
6eb20dbda9/org/html_writer.go (L406-L427)
- Resolves https://codeberg.org/Codeberg/Community/issues/848
(cherry picked from commit 8b8aab83113b34bade61964e2097ed497abc39e9)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#26723
Add `ChangeDefaultBranch` to the `notifier` interface and implement it
in `indexerNotifier`. So when changing the default branch,
`indexerNotifier` sends a message to the `indexer queue` to update the
index.
---------
Co-authored-by: techknowlogick <matti@mdranta.net>
Hello,
The current package guide for cargo gives you only the git index, with
the HTTP Index stabilized being used as default for crates.io and being
better for most use-cases.
However, it's not documented that gitea supports the sparse spec, and it
does not require the _crates-index git repo for the sparse api.
I personally think we should push users to use the sparse instead of the
git repository. (Even let users disable crates-index repos if they only
want to use sparse)
Most middleware throw a 404 in case something is not found e.g. a Repo
that is not existing. But most API endpoints don't include the 404
response in their documentation. This PR changes this.
* Rootless/ful docker images build separately
* Vendor go modules outside docker to speed up the build
Thanks to Alex Ellis for these suggestions (and actuated runner build
time)
* Fix a regression from #26809 (the `data-org` is missing)
* Remove unnecessary style
Screenshots:
Should BucketExists (HeadBucket) fail because of an error related to
the connection rather than the existence of the bucket, no information
is available and the admin is left guessing.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html
> This action is useful to determine if a bucket exists and you have
> permission to access it. The action returns a 200 OK if the bucket
> exists and you have permission to access it.
>
> If the bucket does not exist or you do not have permission to access
> it, the HEAD request returns a generic 400 Bad Request, 403
> Forbidden or 404 Not Found code. A message body is not included, so
> you cannot determine the exception beyond these error codes.
GetBucketVersioning is used instead and exclusively dedicated to
asserting if using the connection does not return a BadRequest.
If it does the NewMinioStorage logs an error and returns. Otherwise
it keeps going knowing that BucketExists is not going to fail for
reasons unrelated to the existence of the bucket and the permissions
to access it.
(cherry picked from commit d1df4b3bc62e5e61893a923f1c4b58f084eb03af)
Refs: https://codeberg.org/forgejo/forgejo/issues/1338
Close#27012
By the way, rename the single-word ID to a long ID.
Unfortunately, when a system setting hasn't been stored in the database,
it cannot be cached.
Meanwhile, this PR also uses context cache for push email avatar display
which should avoid to read user table via email address again and again.
According to my local test, this should reduce dashboard elapsed time
from 150ms -> 80ms .
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
1. Introduce lightweight `fetch` wrapper functions that automatically
sets csfr token, content-type and use it in `RepoActionView.vue`.
2. Fix a specific issue on `RepoActionView.vue` where a fetch network
error is shortly visible during page reload sometimes. It can be
reproduced by F5-in in quick succession on the actions view page and was
also producing a red error box on the page.
Once approved, we can replace all current `fetch` uses in UI with this
in another PR.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Before:
* The layout is quite complex
* The UI flickers when switch the stats (https://try.gitea.io/)
After:
* Simplify the code
* The UI doesn't flicker
Align everything with a new layout.
* Use "baseline" for some special elements, the "flex-item-icon" is for
the issue list only at the moment and I think it should be general
enough now (but not using "flex-item-leading" anymore in this case).
* Make the labels stretch themselves.
Fix#26971
And the UI now will display it's scheduled but not triggered by a push.
<img width="954" alt="图片"
src="d211845c-457e-4c3e-af1f-a0d654d3f365">
1. There is already `gt-ac`, so no need to introduce `flex-item-center`
2. The `flex-item-baseline` and `.flex-item-icon svg { margin-top: 1px
}` seem to be a tricky patch, they don't resolve the root problem, and
still cause misalignment in some cases.
* The root problem is: the "icon" needs to align with the sibling
"title"
* So, make the "icon" and the "title" both have the same height
3. `flex-text-inline` could only be used if the element is really
"inline", otherwise its `vertical-align` would make the box size change.
In most cases, `flex-text-block` is good enough.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
A set of terminology, along with a broader description, can help more
people engage with the Gitea queue system, providing insights and
ensuring its correct use.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
The commit
(958d148043)
forgot two pages 😝
BTW, the `leave` button is in a weird position
1. In many cases, the `flex-list` has previous and next `gt-hidden`
siblings, so relax the CSS selector to remove all ".segument .flex-list"
paddings.
2. Make the "Add key" button can toggle
3. Move help message into the related segment(panel). Otherwise users
would misread the message, eg: the SSH help seemed for GPG because they
are so near
4. Move modal element into the segment element, otherwise it affects the
layout
Hello,
In the discord I saw
[someone](1145061200)
complaining that you can't use the "latest" keyword as release tag to
download a specific file:
In his example:
https://www.uberwald.me/gitea/public/fvtt-ecryme/releases/latest/system.json
However the latest keyword works for the release page, so I think it's a
good thing to implement this on the release attachment download url too.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
A few pages don't load the repo count of an user/org, so it is not shown
in the header. This happens mostly on org pages, but the package
settings applies to the user page as well.
Before:
After:
Seen on #26826
Regression of #25928
A few pages don't load the repo count of an user/org, so it is not shown
in the header. This happens mostly on org pages, but the package
settings applies to the user page as well.
Before:
After:
Seen on #26826
Regression of #25928
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
Follow #24654#22705#24232
In some pages we still have missing badges, for example:
They currently throw a Internal Server Error when you use them without a
token. Now they correctly return a `token is required` error.
This is no security issue. If you use this endpoints with a token that
don't have the correct permission, you get the correct error. This is
not affected by this PR.
- Add routes for creating or updating a user's actions secrets in
`routers/api/v1/api.go`
- Add a new file `routers/api/v1/user/action.go` with functions for
creating or updating a user's secrets and deleting a user's secret
- Modify the `templates/swagger/v1_json.tmpl` file to include the routes
for creating or updating a user's secrets and deleting a user's secret
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
I noticed that the code of several new webhook pages is highly
repetitive, so I pulled out the common parts to a new template, unified
reference, unified maintenance
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The changes for "commit-body" in #26877 are not ideal.
The reason is: the "commit-body" is usually a `<pre>`, it has default
margins. In most cases, we do not need that large margin. So, this PR
introduces a general but small margin for all "commit-body" elements.
Then these `gt-m-0` could be removed.
The `:not` selector is not needed, because the `.timeline-item` selector
is already clear enough.
Replace #26850
Major changes:
1. Remove all `has` selectors, it is still not supported by firefox.
Actually there could be some more general and clearer approaches
2. Remove `two-toggle-buttons`, the `.ui.buttons` just works well
3. Rewrite the `.ui.buttons` border styles, see the screenshots
4. Remove the "fine-tuning" paddings from the the flex children, they
could layout themselves well.
This change was caused by #26271, for configuration as below:
```
[attachment]
ENABLE = true
PATH = data/attachments
MAX_SIZE = 100
MAX_FILES = 5
```
Before #26271, the resolved path is ${AppWorkPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/attachments`)
After #26271, the resolved path is ${AppDataPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/data/attachments`)
Fix https://github.com/go-gitea/gitea/issues/26864
Follow https://github.com/go-gitea/gitea/pull/26271
The old code used complex `if` blocks and strange HTML layouts.
<details>
</details>
This PR refactors the template code and remove legacy CSS styles. The UI
doesn't change much.
Fix the wrong review requested number mentioned by #18808 .
Fix#18808
Before:
After:
1. The `og:description` should be "a one to two sentence description of
your object"
* It shouldn't output all the user inputted content -- it would be
pretty huge.
* Maybe it only needs at most 300 bytes.
2. Do not render commit message as HTML
The [recommended order](https://vuejs.org/guide/scaling-up/sfc.html) for
SFC blocks is script -> template -> style, which we were violating
because template and script were swapped. I do find script first also
easier to read because the imports are on top, letting me immideatly see
a component's dependencies.
This is a pure cut-paste refactor with some removal of some empty lines.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Add more useful Open Graph metadata for commit and file URLs:
- Set `og:title` to the page title, which is a concise summary in both
cases (`<commit message> · <commit hash>` and `<filename> at <branch>`,
respectively)
- Set `og:description` to the commit message body, if available
- Set `og:url` to the relevant URLs instead of the repo URL
Also move the relevant meta tags into a separate template as they now
take up the majority of the base head template.
## Changes
- Forces flashed error to render immediately when forgot password code
is incorrect or has expired.
- Adds a link back to the `forgot_password` page so that the user can
restart the process (in the event that their link has expired)
Fixes#24944
Since a user with write permissions for issues can add attachments to an
issue via the the web interface, the user should also be able to add
attachments via the API
Now that we have the `/assets` directory, we can put`licenses.txt`
directly into it instead of incorrect `/js` path which was previously
only done to avoid reserving a username.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Previously, only some of these regex had the `i` flag and while we can
likely ensure case for our files, these regexes are also used for
third-party files, so it's better to always match insensitively.
- While doing some sanity checks over OpenSSH's code for how they handle
certificates authentication. I stumbled on an condition that checks the
certificate type is really an user certificate on the server-side
authentication. This checks seems to be a formality and just for the
sake of good domain seperation, because an user and host certificate
don't differ in their generation, verification or flags that can be
included.
- Add this check to the builtin SSH server to stay close to the
unwritten SSH specification.
- This is an breaking change for setups where the builtin SSH server is
being used and for some reason host certificates were being used for
authentication.
-
(cherry picked from commit de35b141b79a3d6efe2127ed2c73fd481515e481)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1172
## ⚠️ BREAKING ⚠️
Like OpenSSH, the built-in SSH server will now only accept SSH user
certificates, not server certificates.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
- Modify the `CreateOrUpdateSecret` function in `api.go` to include a
`Delete` operation for the secret
- Modify the `DeleteOrgSecret` function in `action.go` to include a
`DeleteSecret` operation for the organization
- Modify the `DeleteSecret` function in `action.go` to include a
`DeleteSecret` operation for the repository
- Modify the `v1_json.tmpl` template file to update the `operationId`
and `summary` for the `deleteSecret` operation in both the organization
and repository sections
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
Some small dashboard tweaks:
- Remove margin-bottom from divider so first item does not appear to
have un-equal margins
- Restore previous icon color
- Add slight margin-right to icon
Before:
<img width="783" alt="Screenshot 2023-08-31 at 00 10 28"
src="b75f70d7-8704-4afb-866d-fea0484c52d4">
After:
<img width="783" alt="Screenshot 2023-08-31 at 00 10 08"
src="50ed0c47-6f7c-449e-a054-13091369d43f">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
You can currently visit `{repo}/issues/new` and create a blank issue,
even if it's disabled. This PR fixes this,
Fixes https://codeberg.org/forgejo/forgejo/issues/1356
Co-authored-by: Giteabot <teabot@gitea.io>
1. Use `gt-invisible` instead of `invisible`.
2. Use `gt-word-break` instead of `dont-break-out` (there is a slight
different "hyphens", but I think it won't affect too much since it is
only used for the "full name").
3. Remove `.small.button:has(svg)` , now our buttons could layout SVG
correctly, and actually I didn't see this CSS class is used in code.
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
</details>
Partially resolves#25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Backtick syntax now works in repo description too. Also, I replaced the
CSS for this was a new single class, making it more flexible and not
dependent on a parent. Also, very slightly reduced font size from 16.8px
to 16px.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Each change is tested manually line by line. There are too many changes
so I can't share dozens of screenshots.
In short:
1. `ui right` could be still used in `ui top attached header`, because
there is a special case.
2. A lot of `ui right` are just no-op, so they can be removed safely.
3. Some of the `ui right` should be replaced by `gt-float-right` (to
avoid breaking, leave them to the future).
4. A few of the `ui right` could be rewritten by flex.
Corollary to #26775:
All selectors I found that are actually used and not necessarily present
in the current code have been copied to `web_src/css/base.css`.
Everything else should be a clean removal.
> ### Description
> If a new branch is pushed, and the repository has a rule that would
require signed commits for the new branch, the commit is rejected with a
500 error regardless of whether it's signed.
>
> When pushing a new branch, the "old" commit is the empty ID
(0000000000000000000000000000000000000000). verifyCommits has no
provision for this and passes an invalid commit range to git rev-list.
Prior to 1.19 this wasn't an issue because only pre-existing individual
branches could be protected.
>
> I was able to reproduce with
[try.gitea.io/CraigTest/test](https://try.gitea.io/CraigTest/test),
which is set up with a blanket rule to require commits on all branches.
Fix#25565
Very thanks to @Craig-Holmquist-NTI for reporting the bug and suggesting
an valid solution!
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Compare those `Uint8Array` via conversion to Array which are properly
comparable, so that we don't have to worry about whether `TextEncoder`
and `UInt8Array` from the environment are compatible or not.
---------
Co-authored-by: delvh <dev.lh@web.de>
We were missing a number of config files like `.golangci.yml` in the
dependencies for the pull request pipelines, which resulted in the
linting not running for https://github.com/go-gitea/gitea/pull/26786
because only `.golangci.yml` had changed.
Replace #26761
It's better to keep children elements simple, and let parent containers
layout the necessary padding/margin.
The old `not(:last-child)` and `.flex-item + .flex-item` are not easy to
maintain (for example, what if the developer would like to use a "tiny
height" item?)
The old approach also makes some UI look strange because the first item
doesn't have proper padding-top.
In this PR, we just simply use `.flex-item { padding: ... }`:
* Developers could manually set the item height they want easily
* It's easier to make it work with various containers -- with padding
(`ui segment`) and without padding (`div`)
And added more samples/examples.
Co-authored-by: Giteabot <teabot@gitea.io>
Include `GITHUB_TOKEN`/`GITEA_TOKEN` secrets for actions triggered by
pull requests
This makes it consistent with the environment variables which you can
already access
```shell
echo env: $GITHUB_TOKEN
echo expression: ${{ secrets.GITHUB_TOKEN }}
```
before
after
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
spec:
https://docs.github.com/en/rest/actions/secrets?apiVersion=2022-11-28#create-or-update-a-repository-secret
- Add a new route for creating or updating a secret value in a
repository
- Create a new file `routers/api/v1/repo/action.go` with the
implementation of the `CreateOrUpdateSecret` function
- Update the Swagger documentation for the `updateRepoSecret` operation
in the `v1_json.tmpl` template file
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
In PR #26786, the Go version for golangci-lint is bumped to 1.21. This
causes the following error:
```
models/migrations/v1_16/v210.go:132:23: SA1019: elliptic.Marshal has been deprecated since Go 1.21: for ECDH, use the crypto/ecdh package. This function returns an encoding equivalent to that of PublicKey.Bytes in crypto/ecdh. (staticcheck)
PublicKey: elliptic.Marshal(elliptic.P256(), parsed.PubKey.X, parsed.PubKey.Y),
```
The change now uses [func (*PublicKey)
ECDH](https://pkg.go.dev/crypto/ecdsa#PublicKey.ECDH), which is added in
Go 1.20.
From the Go specification:
> "1. For a nil slice, the number of iterations is 0."
https://go.dev/ref/spec#For_range
Therefore, an additional nil check for before the loop is unnecessary.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
All selectors had `.ui.items` prefix and I did not find it in any of the
templates or JS, so this is a pretty safe removal.
Co-authored-by: Giteabot <teabot@gitea.io>
## Description
Sometimes, we need to use an upstream mirror repository to update the
current development repository, but mirror repositories are prohibited
from PR. It should not appear in `merge to,` but it can appear in `pull
from.`
Fix#24585#26193#26781
Related #24183
Many thanks to @apnote for assisting me in reproducing this bug!
## ScreenShot
---
### Before
<img
src="3d76c376-1f54-45b9-80c9-6ba8319d6a9a"
width="400px">
<img
src="fbfd9f7f-421f-4a2e-9a3e-f2958bbf3312"
width="400px">
### After
<img
src="e6984524-4f61-4310-b795-4d8598bd8963"
width="400px">
<img
src="04065b44-78d7-4721-bf31-0f1674150727"
width="400px">
Related to: #8312#26491
In migration v109, we only added a new column `CanCreateOrgRepo` in Team
table, but not initial the value of it.
This may cause bug like #26491.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Fine tune the CSS styles, and add more examples
2. Add necessary "dimmer" animation for modal dialogs, otherwise the UI
seems flicking (follow #26469)
## Changes
- no more hardcoded `border-radius`es (apart from `0`)
- no more value inconsistencies
- no more guessing what pixel value you should use
- two new variables:
- `--border-radius-medium` (for elements where the normal border radius
does not suffice)
- `--border-radius-circle` (for displaying circles)
---------
Co-authored-by: silverwind <me@silverwind.io>
Cargo registry-auth feature requires config.json to have a property
auth-required set to true in order to send token to all registry
requests.
This is ok for git index because you can manually edit the config.json
file to add the auth-required, but when using sparse
(setting index url to
"sparse+https://git.example.com/api/packages/{owner}/cargo/"), the
config.json is dynamically rendered, and does not reflect changes to the
config.json file in the repo.
I see two approaches:
- Serve the real config.json file when fetching the config.json on the
cargo service.
- Automatically detect if the registry requires authorization. (This is
what I implemented in this PR).
What the PR does:
- When a cargo index repository is created, on the config.json, set
auth-required to wether or not the repository is private.
- When the cargo/config.json endpoint is called, set auth-required to
wether or not the request was authorized using an API token.
According to the GitHub API Spec:
https://docs.github.com/en/rest/actions/secrets?apiVersion=2022-11-28#create-or-update-an-organization-secret
Merge the Create and Update secret into a single API.
- Remove the `CreateSecretOption` struct and replace it with
`CreateOrUpdateSecretOption` in `modules/structs/secret.go`
- Update the `CreateOrUpdateOrgSecret` function in
`routers/api/v1/org/action.go` to use `CreateOrUpdateSecretOption`
instead of `UpdateSecretOption`
- Remove the `CreateOrgSecret` function in
`routers/api/v1/org/action.go` and replace it with
`CreateOrUpdateOrgSecret`
- Update the Swagger documentation in
`routers/api/v1/swagger/options.go` and `templates/swagger/v1_json.tmpl`
to reflect the changes in the struct names and function names
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Followup https://github.com/go-gitea/gitea/pull/26478
## Archived labels UI
Changed:
* Enhanced the Filtered UI page to seamlessly incorporate a list of
archived labels.
Outsourced:
* Defer the implementation of specialized handling for archived labels
to upcoming pull requests. This step will be undertaken subsequent to
the successful merge of this pull request.
Screenshots
---
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Fix some bugs from #25715, fix#25830
1. `$.locale.Tr ... Safe` needs `Escape`, but not `PathEscapeSegments`
2. The attribute should be `role`
3. The `ComposeBranchCompareURL` already does escaping correctly
Fix#26731
Almost all "tabindex" in code are incorrect.
1. All "input/button" by default are focusable, so no need to use "tabindex=0"
2. All "div/span" by default are not focusable, so no need to use "tabindex=-1"
3. All "dropdown" are focusable by framework, so no need to use "tabindex"
4. Some tabindex values are incorrect (eg: `new_form.tmpl`), so remove them
Co-authored-by: Giteabot <teabot@gitea.io>
Removed CSS helper classes (some of them are not useful while some of
them are abused often)
* `gt-db`: in most cases it could be replaced by `gt-df` and the flex
layout should be encouraged. Other cases: either it does need the
`gt-df` (eg: by using `div` directly) or it is an abuse (eg: the warning
message in a form)
* `gt-di`: it doesn't seem useful, or it could be replaced by `gt-dib`
in most cases.
* `gt-dif`: not useful, it could be replaced by `flex-text-inline` or
`gt-df`
* `gt-js`: never used
* All `<i class="icon gt-df gt-ac gt-jc">` could be written as `<i
class="icon">`
## Some UI samples
### Admin Notice
### Admin Stacktrace
### Org Home
### Org Team Repo
### Release List
### User Setting Application Token Scope
Co-authored-by: Giteabot <teabot@gitea.io>
Replace Fomantic `loader` CSS module with our existing `is-loading`
spinner. Only three places in the UI used this module, which are
pictured here:
imagediff:
<img width="1237" alt="Screenshot 2023-08-22 at 22 18 01"
src="b0d82531-f05e-43c6-9e5b-1bfc268c056d">
webauthn:
<img width="894" alt="Screenshot 2023-08-22 at 22 05 05"
src="7b583425-d944-474a-a57a-22a65bbd8b29">
heatmap (I removed the previous loading text, it was unreadable because
it was tiny and on fast machines only visible for a fraction of a
second):
<img width="764" alt="Screenshot 2023-08-22 at 22 18 44"
src="1c7472d6-3e17-4224-a992-d8c0b380cc73">
Also, heatmap container does not resize any more after loading now and
previous duplicate id `user-heatmap` is gone.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds
[eslint-plugin-vue-scoped-css](https://github.com/future-architect/eslint-plugin-vue-scoped-css)
and fixes discovered issues which are:
- 1 unused selector
- 3 selectors with `.full.height` parent in a `<style scoped>` block so
the rule could not find the parent. Move these into the unscoped block
instead. They worked before and after.
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
Focus the editor when clicking the "Write" tab. Works for both Textarea
and EasyMDE. Does for some reason not work without the
`requestAnimationFrame`.
The "btn-octicon is-loading" was introduced by #21842 , it is only used
by the "Copy Content" button, but the "btn-octicon" selector would
affect too many uncertain elements.
Now there is a general "small-loading-icon" class, so the "btn-octicon
is-loading" could be removed.
1. Use `is-loading` instead of `ui loader`
2. Introduce class name `image-diff-tabs`, instead of searching `gt-hidden`, which is fragile
3. Align the UI elements, see the screenshots.
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Hi,
We'd like to add merge files files to GetCommitFileStatus fucntions so
API returns the list of all the files associated to a merged pull
request commit, like GitHub API does.
The list of affectedFiles for an API commit is fetched from toCommit()
function in routers/api/v1/repo/commits.go, and API was returning no
file in case of a pull request with no conflict, or just files
associated to the confict resolution, but NOT the full list of merged
files.
This would lead to situations where a CI polling a repo for changes
could miss some file changes due to API returning an empty / partial
list in case of such merged pull requests. (Hope this makes sense :) )
NOTE: I'd like to add a unittest in
integrations/api_repo_git_commits_test.go but failed to understand how
to add my own test bare repo so I can make a test on a merged pull
request commit to check for affectedFiles.
Is there a merged pull request in there that I could use maybe?
Could someone please direct me to the relevant ressources with
informations on how to do that please?
Thanks for your time,
Laurent.
---------
Co-authored-by: Thomas Desveaux <desveaux.thomas@gmail.com>
Fixes: #26333.
Previously, this endpoint only updates the `StatusCheckContexts` field
when `EnableStatusCheck==true`, which makes it impossible to clear the
array otherwise.
This patch uses slice `nil`-ness to decide whether to update the list of
checks. The field is ignored when either the client explicitly passes in
a null, or just omits the field from the json ([which causes
`json.Unmarshal` to leave the struct field
unchanged](https://go.dev/play/p/Z2XHOILuB1Q)). I think this is a better
measure of intent than whether the `EnableStatusCheck` flag was set,
because it matches the semantics of other field types.
Also adds a test case. I noticed that [`testAPIEditBranchProtection`
only checks the branch
name](c1c83dbaec/tests/integration/api_branch_test.go (L68))
and no other fields, so I added some extra `GET` calls and specific
checks to make sure the fields are changing properly.
I added those checks the existing integration test; is that the right
place for it?
Replace #22751
1. only support the default branch in the repository setting.
2. autoload schedule data from the schedule table after starting the
service.
3. support specific syntax like `@yearly`, `@monthly`, `@weekly`,
`@daily`, `@hourly`
## How to use
See the [GitHub Actions
document](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#schedule)
for getting more detailed information.
```yaml
on:
schedule:
- cron: '30 5 * * 1,3'
- cron: '30 5 * * 2,4'
jobs:
test_schedule:
runs-on: ubuntu-latest
steps:
- name: Not on Monday or Wednesday
if: github.event.schedule != '30 5 * * 1,3'
run: echo "This step will be skipped on Monday and Wednesday"
- name: Every time
run: echo "This step will always run"
```
Signed-off-by: Bo-Yi.Wu <appleboy.tw@gmail.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The branch name display here is based on the repo's default branch which
is not correct.
For example, if I changed the default branch, the branch name here will
also be changed:
you can confirm this in :
https://try.gitea.io/yp05327/testrepo/pulls/1/commits
I think we do not need to display branch name here, as we already have
the branch info above.
close https://github.com/go-gitea/gitea/issues/24368
## what my pull request does
Since the official documentation states that custom bots do not support
hyperlink functionality, simply adding it without making some formatting
changes would result in an unappealing output. Therefore, I have
modified the formatting of the output. Currently, it is only used for
Feishu.
---
[docs](https://open.feishu.cn/document/uAjLw4CM/ukTMukTMukTM/im-v1/message/create_json#%E8%B6%85%E9%93%BE%E6%8E%A5%E4%BD%BF%E7%94%A8%E8%AF%B4%E6%98%8E)
<img width="641" alt="image"
src="360e1c81-ab64-4ef6-851e-aa450d6e85a4">
- Issue
<img width="423" alt="image"
src="519f6fae-81ab-4ec8-89b8-f6a73ff93783">
- Issue Comment
<img width="548" alt="image"
src="749c0d1c-3657-431e-b787-8bf4c23cce83">
- Assign
<img width="431" alt="image"
src="066f99e5-eabb-455d-91fb-a8359cc26dc7">
<img width="457" alt="image"
src="c6c10f99-db83-46ef-a775-4c91979fa68f">
- Merge
<img width="408" alt="image"
src="e627bf43-5954-45aa-acf6-261ee046802f">
- PullRequest
<img width="425" alt="image"
src="72cfa714-d3fa-4fb9-abdd-e8508d756056">
Now Gitea exposes unhandled promise rejection messages as error message on the UI.
The "comment form" was quite unclear before, so it should be handled more gracefully to avoid such error.
This PR has multiple parts, and I didn't split them because
it's not easy to test them separately since they are all about the
dashboard page for issues.
1. Support counting issues via indexer to fix#26361
2. Fix repo selection so it also fixes#26653
3. Keep keywords in filter links.
The first two are regressions of #26012.
After:
71dfea7e-d9e2-42b6-851a-cc081435c946
Thanks to @CaiCandong for helping with some tests.
copy and modified from #14572
> Whilst debating enforcing MFA within our team, I realised there isn't
a lot of context to the side effects of enabling it. Most of us use Git
over HTTP and would need to add a token.
I plan to add another PR that adds a sentence to the UI about needing to
generate a token when enabling MFA if HTTP is to be used.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Fix#26617
1. Separate the "flex-list" examples into a dedicated template, and add some more examples
2. Use `flex-basis` instead of `flex-shrink` for `flex-item-trailing`, to avoid wrapping the texts too aggressively
3. Some `flex-wrap: wrap;` are removed
- Add a new `CreateSecretOption` struct for creating secrets
- Implement a `CreateOrgSecret` function to create a secret in an
organization
- Add a new route in `api.go` to handle the creation of organization
secrets
- Update the Swagger template to include the new `CreateOrgSecret` API
endpoint
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
In GitHub, we can not rerun jobs if the workflow is disabled.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Previously, `err` was defined above, checked for `err == nil` and used
nowhere else.
Hence, the result of `convertMinioErr` would always be `nil`.
This leads to a NPE further down the line.
That is not intentional, it should convert the error of the most recent
operation, not one of its predecessors.
Found through
1143185780.
https://github.com/go-gitea/gitea/issues/26567#issue-1855312074
> The terms `closest` and `furthest` don't describe the actual sorting
behavior as these two are semantically relative to the current date.
> Could we switch to `earliest` and `latest` instead?
close#26567
---------
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: Giteabot <teabot@gitea.io>
We now include the branch filler in the response.
- Closes#26591
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Add `box-shadow` replacement to the `floating` dropdown variant as well,
which was missed in https://github.com/go-gitea/gitea/pull/26469. The
Fomantic style has `!important`, so this has to have too. Also made a
tiny adjustment to shadow color on dark theme.
<img width="305" alt="Screenshot 2023-08-18 at 16 40 34"
src="a0aac9cb-6393-4d69-b0b3-00eaac5ccf9f">
<img width="202" alt="Screenshot 2023-08-18 at 16 40 22"
src="0a5fa3aa-7452-4dbd-86ed-ccbc1c872ebb">
Co-authored-by: Giteabot <teabot@gitea.io>
- Added new tests to cover corner cases
- Replace existing regex with new one
Closes#26551
---
As @silverwind suggested, I started from
[validate-npm-package-name](https://github.com/npm/validate-npm-package-name),
but found this solution too complicated.
Then I tried to fix existing regex myself, but thought, that exclude all
restricted symbols is harder, than set only allowed symbols.
Then I search a bit more and found
[package-name-regex](https://github.com/dword-design/package-name-regex)
and regex from it works for all new test cases.
Let me know, if more information or help with this PR is needed.
the head branch is meaningless for a agit flow pull request, so should
not check it when reopen it.
related: #24231fix#26334
Signed-off-by: a1012112796 <1012112796@qq.com>
Fix some layout / user-interaction problems and close#25650 , the code
has been simplified (+46 −108)
<details>
</details>
---------
Co-authored-by: delvh <dev.lh@web.de>
Now that https://github.com/techknowlogick/xgo/issues/163 is resolved,
we can bump these.
It seems there is no way to dry-run this, so we may only notice issues
next release, but I don't expect any.
Fix#26537
Use the same default line-height as "normalize.css" instead of "1". "1"
is not right because it doesn't work with descent part and causes
overflow problems.
---------
Co-authored-by: silverwind <me@silverwind.io>
Provide a way to rebuild issue indexer manually.
So if the indexer get outdated because of some bugs like #26539, we can
rebuild it.
<img width="1104" alt="image"
src="ac242e29-6f04-47ca-b3d0-801a796448d3">
Co-authored-by: Giteabot <teabot@gitea.io>
Removes all dropdown and dimmer animations. Works everywhere as far as I
can tell, but need to give this thorough testing. Removes around 70kb
JS/CSS.
Note, I'm not 100% sure regarding the various callbacks, those will need
more investigation, but it appears to work nonetheless.
Fixes: https://github.com/go-gitea/gitea/issues/15709
User settings page and admin settings page are too similar. I thinlk
this will be better of using `User Settings` and `Admin Settings` as the
navbar's title.
Before:
After:
Fix#26536
Follow #26012
Whatever the comment type is, always update the issue indexer. So the
issue indexer will be updated when there is a change in Status,
Assignee, Label, and so on.
I added the logic for `NotifyUpdateComment`, but missed it for
`NotifyCreateIssueComment` and `NotifyDeleteComment`.
Before:
After:
In current design, the clickable area is too small, and it is hard to
find the correct clickable area as the area with background color (div
with class name `job-brief-item selected`) is bigger than it.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
The color is taken from "Name"
Before:
After:
Co-authored-by: Giteabot <teabot@gitea.io>
Fix:
- display member count and team count in the menu bar
- Also display member unit in the menu bar if there are no hidden
members in public org
- hidden member board when there's no seeable members.
In this org, we only have hidden members:
We will hidden the member board when doer is not the member of this org
Before:
If you click the number in the members board, you will access the
members page, which is not expected.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
- Add a new function `CountOrgSecrets` in the file
`models/secret/secret.go`
- Add a new file `modules/structs/secret.go`
- Add a new function `ListActionsSecrets` in the file
`routers/api/v1/api.go`
- Add a new file `routers/api/v1/org/action.go`
- Add a new function `listActionsSecrets` in the file
`routers/api/v1/org/action.go`
go-sdk: https://gitea.com/gitea/go-sdk/pulls/629
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Giteabot <teabot@gitea.io>
"ogg" is just a "container" format for audio and video.
Golang's `DetectContentType` only reports "application/ogg" for
potential ogg files.
Actually it could do more "guess" to see whether it is a audio file or a
video file.
As title, that's simmilar with github.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Jason Song <i@wolfogre.com>
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#25564Fixes#23191
- Api v2 search endpoint should return only the latest version matching
the query
- Api v3 search endpoint should return `take` packages not package
versions
Previously, the tooltip for this button was only shown after opening and
closing it once because it was only set after the server response, now
it shows before opening it.
Fix https://github.com/go-gitea/gitea/pull/26448#issuecomment-1676194200
I accidentally set grab cursor for project columns instead of issue
cards, which actually turned out not to be a problem - with proper check
for the default column, which can't be moved.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR rewrites the function `getStorage` and make it more clear.
Include tests from #26435, thanks @earl-warren
---------
Co-authored-by: Earl Warren <contact@earl-warren.org>
The xorm `Sync2` has already been deprecated in favor of `Sync`,
so let's do the same inside the Gitea codebase.
Command used to replace everything:
```sh
for i in $(ag Sync2 --files-with-matches); do vim $i -c ':%sno/Sync2/Sync/g' -c ':wq'; done
```
Replace #26197
Since #25528 merged, the links of pull request commits should be
redirect to pull file changes UI but not the generic one.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Close stdout correctly for "git blame", otherwise the failed "git blame"
would case the request hanging forever.
And "os.Stderr" should never (seldom) be used as git command's stderr
When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)
So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds our matrix space to the support options and alphabetizes
the list.
I also considered adding our Mastodon, however that isn't as suitable as
the other options because it's just whoever has access to the account vs
a community chat/forum.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR refactors a bunch of projects-related code, mostly the
templates.
The following things were done:
- rename boards to columns in frontend code
- use the new `ctx.Locale.Tr` method
- cleanup template, remove useless newlines, classes, comments
- merge org-/user and repo level project template together
- move "new column" button into project toolbar
- move issue card (shared by projects and pinned issues) to shared
template, remove useless duplicated styles
- add search function to projects (to make the layout more similar to
milestones list where it is inherited from 😆)
- maybe more changes I forgot I've done 😆Closes#24893
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Ressurect lost changes from
https://github.com/go-gitea/gitea/pull/24451.
- Always show icons for each entry in the menu
- Make all checkboxes toggle only their feature, e.g. "seconds" and
"timestamps" can now be toggled on together.
- Reorder the items
<img width="845" alt="Screenshot 2023-08-01 at 19 19 27"
src="8a76e9bf-7966-42a6-87c9-e88cdddaec82">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
For some reason, the permission of the client_id and secret may cannot
create bucket, so now we will check whether bucket does exist first and
then try to create a bucket if it doesn't exist.
Try to fix#25984
Co-authored-by: silverwind <me@silverwind.io>
In the `RepoRefForAPI()` context function `CommitID` is not set if `ref`
is used. It is set correctly for other if/else branches where `Commit`
is set. It doesn't appear that any routes that use `RepoRefForAPI()`
also use `CommitID` but that may be the case in the future.
## Changes
- Sets `ctx.Repo.CommitID` when `ref` is explicitly used for api routes
that use `RepoRefForAPI()`
In the previous feature description, numerous functionalities of Gitea
were listed, which appeared redundant and failed to highlight the unique
characteristics of Gitea. Therefore, I have rewritten this section based
on the description provided on the official Gitea website
Fixes https://github.com/go-gitea/gitea/issues/26439.
The minification result is not ideal with esbuild, but it's better than
failing competely.
Co-authored-by: Giteabot <teabot@gitea.io>
To prevent unwanted surprises with new minor versions of go, lock the
version to minor version using [semver tilde
syntax](https://github.com/npm/node-semver#tilde-ranges-123-12-1). We
were already getting 1.21.0 since yesterday, so use that version now as
minimum.
Even if GetDisplayName() is normally preferred elsewhere, this change
provides more consistency, as usernames are also always being shown
when participating in a conversation taking place in an issue or
a pull request. This change makes conversations easier to follow, as
you would not have to have a mental association between someone's
username and someone's real name in order to follow what is happening.
This behavior matches GitHub's. Optimally, both the username and the
full name (if applicable) could be shown, but such an effort is a
much bigger task that needs to be thought out well.
Before:
After:
In #26214, we changed each row's display into `flex` which caused this
problem.
In old version:
Maybe we can add paddings here?
In old version;
The MinIO client isn't redirecting to the correct AWS endpoint if a
non-default data center is used.
In my use case I created an AWS bucket at `eu-central-1` region. Because
of the missing region initialization of the client the default
`us-east-1` API endpoint is used returning a `301 Moved Permanently`
response that's not handled properly by MinIO client. This in return
aborts using S3 storage on AWS as the `BucketExists()` call will fail
with the http moved error.
MinIO client trace shows the issue:
```text
---------START-HTTP---------
HEAD / HTTP/1.1
Host: xxxxxxxxxxx-prod-gitea-data.s3.dualstack.us-east-1.amazonaws.com
User-Agent: MinIO (windows; amd64) minio-go/v7.0.61
Authorization: AWS4-HMAC-SHA256 Credential=**REDACTED**/20230809/accesspoint.eu-central-1/s3/aws4_request, SignedHeaders=host;x-amz-content-sha256;x-amz-date, Signature=**REDACTED**
X-Amz-Content-Sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
X-Amz-Date: 20230809T141143Z
HTTP/1.1 301 Moved Permanently
Connection: close
Content-Type: application/xml
Date: Wed, 09 Aug 2023 14:11:43 GMT
Server: AmazonS3
X-Amz-Bucket-Region: eu-central-1
X-Amz-Id-2: UK7wfeYi0HcTcytNvQ3wTAZ5ZP1mOSMnvRZ9Fz4xXzeNsS47NB/KfFx2unFxo3L7XckHpMNPPVo=
X-Amz-Request-Id: S1V2MJV8SZ11GEVN
---------END-HTTP---------
```
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
Fix#26129
Replace #26258
This PR will introduce a transaction on creating pull request so that if
some step failed, it will rollback totally. And there will be no dirty
pull request exist.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Add webhook events for pull request review requests
- Fixes#26371
- Added support for the "Pull request review requested" and "Pull
request review request removed" webhook events.
- Updated the `getPullRequestPayloadInfo` function in `general.go` to
handle these new webhook events.
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
From Discord
1136719889
Artifact chunks merging is break on Windows.
```
Gitea Log:
2023/08/03 20:51:15 ...actions/artifacts.go:271:comfirmUploadArtifact() [E] Error merge chunks: parse content range error: input does not match format
```
Artifact uses wrong slash to parse saved chunks path.
I kept sending pull requests that consisted of one-line changes. It's
time to
settle this once and for all. (Maybe.)
- Explain Gitea behavior and the consequences of each
setting better, so that the user does not have to consult
the docs.
- Do not use different spellings of identical terms
interchangeably, e.g. `e-mail` and `email`.
- Use more conventional terms to describe the same things,
e.g. `Confirm Password` instead of `Re-Type Password`.
- Introduces additional clarification for Mirror Settings
- Small adjustments in test
- This is a cry for help.
- Grammar and spelling consistencies for en-US locale
(e.g. cancelled -> canceled)
- Introduce tooltip improvements.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
There are 2 kinds of ".Editorconfig" in code, one is `JSON string` for
the web edtior, another is `*editorconfig.Editorconfig` for the file
rendering (used by `TabSizeClass`)
This PR distinguish them with different names.
And by the way, change the default tab size from 8 to 4, I think few
people would like to use 8-size tabs nowadays.
- The permalink and 'Reference in New issue' URL of an renderable file
(those where you can see the source and a rendered version of it, such
as markdown) doesn't contain `?display=source`. This leads the issue
that the URL doesn't have any effect, as by default the rendered version
is shown and thus not the source.
- Add `?display=source` to the permalink URL and to 'Reference in New
Issue' if it's renderable file.
- Add integration testing.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1088
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Before:
* `{{.locale.Tr ...}}`
* `{{$.locale.Tr ...}}`
* `{{$.root.locale.Tr ...}}`
* `{{template "sub" .}}`
* `{{template "sub" (dict "locale" $.locale)}}`
* `{{template "sub" (dict "root" $)}}`
* .....
With context function: only need to `{{ctx.Locale.Tr ...}}`
The "ctx" could be considered as a super-global variable for all
templates including sub-templates.
To avoid potential risks (any bug in the template context function
package), this PR only starts using "ctx" in "head.tmpl" and
"footer.tmpl" and it has a "DataRaceCheck". If there is anything wrong,
the code can be fixed or reverted easily.
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
---------
Co-authored-by: silverwind <me@silverwind.io>
- Currently the post processing will transform all issue indexes (such as `#6`) into a clickable link.
- This makes sense in an situation like issues or PRs,
where referencing to other issues is quite common
and only referencing their issue index is an handy and efficient way to do it.
- Currently this is also run for documents
(which is the user profile and viewing rendered files),
but in those situations it's less common to reference issues by their index and instead could mean something else.
- This patch disables this post processing for issue index for documents. Matches Github's behavior.
- Added unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1120
Co-authored-by: Gusted <postmaster@gusted.xyz>
Now, you don't need to be a git expert anymore to know what these
numbers mean.
## Before
## After
or when the mode actually changed:
Follow the CLI refactoring
1. Remove the "checkCommandFlags" helper
2. Unify the web startup message, make them have consistent names as `./gitea help`
3. Fine tune some other messages (see the diff)
Now, for a new repo without any commit, the Last indexed SHA field looks like this:
Before:
After:
Fixes#26336
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
If click `load branches and tags`, you will get 500 error from backend,
as it is a wiki repo.
Co-authored-by: Giteabot <teabot@gitea.io>
As mentioned in the original thread (#23260) and in the enhancements PR
#24753, this PR ensures the .profile repository is public before the
README file is shown.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
I noticed that `issue_service.CreateComment` adds transaction operations
on `issues_model.CreateComment`, we can merge the two functions and we
can avoid calling each other's methods in the `services` layer.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#26064
Some git commands should use parent context, otherwise it would exit too
early (by the default timeout, 10m), and the "cmd.Wait" waits till the
pipes are closed.
This PR will fix#26264, caused by #23911.
The package configuration derive is totally wrong when storage type is
local in that PR.
This PR fixed the inherit logic when storage type is local with some
unit tests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#26270.
Co-Author: @wxiaoguang
Thanks @lunny for providing this solution
As
https://github.com/go-gitea/gitea/issues/26270#issuecomment-1661695151
said, at present we cannot get the names of changed files correctly when
the `OldCommitID` is `EmptySHA`. In this PR, the `GetCommitFilesChanged`
method is added and will be used to get the changed files by commit ID.
References:
- https://stackoverflow.com/a/424142
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
fixed#26156
* Added a retry button in the frontend (only displayed when the status
is abnormal)
* After clicking Retry, the backend adds the task back to the task queue
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
By using a different color it's clear that the review isn't pointing to
the latest commit.
**Screenshots:**
Not stale review:
Stale review:
fixes#26306
We are using `<a>` for commit status check icon with no link. So it is
clickable but this is no sense.
I think we can convert this to `div`.
Co-authored-by: Giteabot <teabot@gitea.io>
This commit assumes that the warning can be made more discreet
so as to make it less annoying for the people that do not actually
need the warning, without necessarily increasing the risk for those
that do need it.
This doesn't fix the underlying problem of the warning being shown
in certain cases that, say, a certain kind of whitespace character
like 0x1E could be absolutely justifiable from a technical
perspective.
---------
Co-authored-by: delvh <dev.lh@web.de>
- The user renaming function has zero test coverage.
- This patch brings that up to speed to test for various scenarios and
ensure that in a normal workflow the correct things has changed to their
respective new value. Most scenarios are to ensure certain things DO NOT
happen.
(cherry picked from commit 5b9d34ed115c9ef24012b8027959ea0afdcb4e2d)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1156
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Just to get 100% coverage on services/wiki/wiki_path.go, nothing
special. This is just an formality.
(cherry picked from commit 6b3528920fbf18c41d6aeb95498af48443282370)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1156
Co-authored-by: Gusted <postmaster@gusted.xyz>
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config
Co-authored-by: Giteabot <teabot@gitea.io>
- `setting.UI.Notification.EventSourceUpdateTime` is by default 10
seconds, which adds an 10 second delay before the test succeeds.
- Lower the interval to reduce it to at most 3 second delay (the code
only send events when they are at least 2 seconds old).
(cherry picked from commit 3adb9ae6009ff3ddebaed4875e086343f668ef7b)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1166
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Allow users to edit the sync interval for existing push mirrors.
Currently, there is no way to modify the interval once the mirror is
created.
<details>
<summary>Screenshots</summary>
## Before
<img width="936" alt="Screenshot 2023-07-26 at 9 31 21 AM"
src="35b8a40c-4320-474c-a866-1dea0f1fa0de">
## After
<img width="945" alt="Screenshot 2023-07-26 at 9 44 40 AM"
src="ee12e12f-0f68-4feb-90eb-33366f5997d3">
### On hover
<img width="247" alt="image"
src="2f32de45-bd50-4150-9623-3be2ef3ea7f8">
<img width="237" alt="image"
src="49f4ab4d-ccff-4489-80ce-a9788a73c3bb">
<img width="245" alt="image"
src="165fc888-9d48-438a-b730-d4beb12122af">
### Edit modal
<img width="905" alt="image"
src="2a7ca24b-4f36-4e0e-9799-39f2ecc46413">
### Only valid times are allowed
<img width="728" alt="Screenshot 2023-07-26 at 9 50 01 AM"
src="ced6d330-c235-4e29-8f17-28daddcf1444">
<img width="853" alt="image"
src="8636f62a-70d1-4684-a3e8-b205adc03580">
</details>
Fixes#21295
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes#26263
We have to pass the date without the time.
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Related to #26239
This PR makes some fixes:
- do not show the prompt for mirror repos and repos with pull request
units disabled
- use `commit_time` instead of `updated_unix`, as `commit_time` is the
real time when the branch was pushed
This PR introduces a new UI element type for Gitea called `flex-item`.
It consists of a horizontal card with a leading, main and trailing part:
The idea behind it is that in Gitea UI, we have many cases where we use
this kind of layout, but it is achieved in many different ways:
- grid layout
- `.ui.list` with additional hacky flexbox
- `.ui.key.list` - looks to me like a style set originally created for
ssh/gpg key list, was used in many other places
- `.issue.list` - created for issue cards, used in many other places
- ...
This new style is based on `.issue.list`, specifically the refactoring
of it done in #25750.
In this PR, the new element is introduced and lots of templates are
being refactored to use that style. This allows to remove a lot of
page-specific css, makes many of the elements responsive or simply
provides a cleaner/better-looking way to present information.
A devtest section with the new style is also available.
<details>
<summary>Screenshots (left: before, right: after)</summary>
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Our `devtest` page contains some good UI examples which should be taken
as example when working on Gitea UI. Mention it in our frontend
contributing guidelines to for new contributors to know about it.
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Same as https://github.com/go-gitea/gitea/pull/26026 but for the user
settings page. It introduces a new `flex-container` class and shares it
across both pages.
Before and After:
<img width="1264" alt="Screenshot 2023-07-21 at 19 35 57"
src="1358dab4-55c0-40ce-a4d5-673099304f3d">
<img width="1269" alt="Screenshot 2023-07-21 at 19 35 42"
src="34812f6d-dc65-4009-b977-90e03efdc6d1">
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This simply shows the Image size on the view page. This is useful, if
you search a image with a specific size.
In the original implementation, we can only get the first 30 records of
the commit status (the default paging size), if the commit status is
more than 30, it will lead to the bug #25990. I made the following two
changes.
- On the page, use the ` db.ListOptions{ListAll: true}` parameter
instead of `db.ListOptions{}`
- The `GetLatestCommitStatus` function makes a determination as to
whether or not a pager is being used.
fixed#25990
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
I find the colored buttons in the issue sidebar distracting, given that
they are not primary actions, I think we can de-colorize them.
Before:
<img width="285" alt="Screenshot 2023-07-26 at 19 42 22"
src="7e784805-4e01-4199-94bb-0538a0130264">
<img width="288" alt="Screenshot 2023-07-26 at 19 43 06"
src="3a89c661-e24a-4ebf-a585-d404d0a6a78a">
<img width="285" alt="Screenshot 2023-07-26 at 19 44 36"
src="c1aa8c13-6f41-4763-8149-d1c07cb4be5c">:
After:
<img width="286" alt="Screenshot 2023-07-26 at 19 42 04"
src="74d640c2-e0ab-4fef-87aa-9e788e9010e2">
<img width="285" alt="Screenshot 2023-07-26 at 19 42 51"
src="3b69976a-9aa4-4e1c-8df3-4168f4a9fcf9">
<img width="286" alt="Screenshot 2023-07-26 at 19 45 15"
src="897222fd-4df2-4d99-98eb-e5f8fb77c4d6">
Resizing the comment editor can be a very expensive operation because it
triggers page reflows, which on large PRs can take upwards of seconds to
complete. Disable this mechanism on the diff page only where we know
that the page can get large.
Fixes https://github.com/go-gitea/gitea/issues/26201 for the textarea
editor.
I don't think this can be fixed for EasyMDE because as far as I can
tell, it exposes no option to disable this resizing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes: https://github.com/go-gitea/gitea/issues/26202
Actually later I found out the code did not use `clippie`, so I fixed
it. The bug was never in the clippie module like I initially suspected.
Also, I added a tooltip for feedback.
<img width="139" alt="image"
src="da501670-9c15-4412-969a-b559773c7ab9">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
as title
Fixes : #25825
Before
<img width="1334" alt="image"
src="c54a41b0-39bd-4094-a956-081a8f4128f2">
After change
<img width="1340" alt="image"
src="c112d235-6bbe-4bcb-9529-78da3ab0fa14">
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
Fixed two incorrect headers for setting the page navigation bar:
* User settings page, should not use the title "`org.settings`"
* Repo settings page, should not use the title "`org.settings`"
This PR adds a new dropdown to select a commit or a commit range
(shift-click like github) of a Pull Request.
After selection of a commit only the changes of this commit will be shown.
When selecting a range of commits the diff of this range is shown.
This allows to review a PR commit by commit or by viewing only commit ranges.
The "Show changes since your last review" mechanism github uses is implemented, too.
When reviewing a single commit or a commit range the "Viewed" functionality is disabled.
## Screenshots
### The commit dropdown
### Selecting a commit range
### Show changes of a single commit only
### Show changes of a commit range
Fixes https://github.com/go-gitea/gitea/issues/20989
Fixes https://github.com/go-gitea/gitea/issues/19263
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Attemp fix: #25744
Fixing the log level when we delete any repo then we get error hook not
found by id. That should be warn level to reduce the noise in the logs.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fixes#25918
The migration fails on MSSQL because xorm tries to update the primary
key column. xorm prevents this if the column is marked as auto
increment:
c622cdaf89/internal/statements/update.go (L38-L40)
I think it would be better if xorm would check for primary key columns
here because updating such columns is bad practice. It looks like if
that auto increment check should do the same.
fyi @lunny
- Configure `setting.CacheService.TTL` which will force the code to go
trough the caching mechanism.
- Remove the TODO and uncomment the test code.
(cherry picked from commit a201f2f1896c1a086f3e37f86b1306d44c07f2e4)
Refs: https://codeberg.org/forgejo/forgejo/pulls/974
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix: https://github.com/go-gitea/gitea/issues/26152
Thease changes are related to UX and accessibility changes in desktop
mode.
<img width="50" alt="image"
src="30a75b50-4f8d-4108-9219-2c69b2a8fa6f">
Also this is incomplete header
<img width="264" alt="image"
src="87837076-dfc7-4a68-863a-795edf61eb02">
Lets add a tooltip if it is applicable or add `title` attribute so that
it will be clearly visible.
After
Now, you can see for a commit which existing branches and tags contain it.
You first have to click on the `load branches and tags` button, they are not preloaded by default.
All branches and tags are ordered descending by creation date.
You can even see without much hassle if the given commit is already part of the default branch.
Closes#25152
## Screenshots
### Initial
### Loaded
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR addresses an issue where logged-in users get redirected to the
homepage when trying to access a URL with the redirect_to parameter. The
issue was traced back to a middleware function in
services/auth/middleware.go that redirects logged-in users to the
homepage. This function didn't account the redirect_to parameter.
The fix modifies the middleware function to check for this case and
redirect the user to the specified URL instead of the homepage.
Closes: #26005
---------
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixed typos considering CONTRIBUTING.md.
This line:
GitHub API compatability #github-api-compatability
changed to:
GitHub API compatibility #github-api-compatibility
and this line:
GitHub API compatability
changed to:
GitHub API compatibility
If there's no logs, you can also click the download button, then you
will get `job is not started` page
https://gitea.com/yp05327/testrepo/actions/runs/38
After:
If there's no steps displayed, the download button will be disabled.
https://github.com/go-gitea/gitea/pull/26051 I accidentally rebased
locally without my re-addition for these files, so they were missed in
the merge, but only for `main`.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
It was caused by updating `asciinema-player`, the upstream changed the
CSS class prefix:
`40505e479e`
<details>
<summary>Before:</summary>
<img width="1320" alt="image"
src="b91a2cf5-c1da-43d6-bac2-bc278728b11e">
</details>
<details>
<summary>After:</summary>
<img width="1311" alt="image"
src="c9872d25-e0bb-43d4-8b1e-d87c6b03c0a2">
</details>
- The `NoBetterThan` function can only handle comparisons between
"pending," "success," "error," and "failure." For any other comparison,
we directly return false. This prevents logic errors like the one in
#26121.
- The callers of the `NoBetterThan` function should also avoid making
incomparable calls.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
This PR
- Fix#26093. Replace `time.Time` with `timeutil.TimeStamp`
- Fix#26135. Add missing `xorm:"extends"` to `CountLFSMetaObject` for
LFS meta object query
- Add a unit test for LFS meta object garbage collection
The JSONRedirect/JSONOK/JSONError functions were put into "Base" context
incorrectly, it would cause abuse.
Actually, they are for "web context" only, so, move them to the correct
place.
And by the way, use them to simplify old code: +75 -196
This PR cleans up the docs in a way to make them simpler to ingest by
our [docs repo](https://gitea.com/gitea/gitea-docusaurus).
1. It includes all of the sed invocations our ingestion did, removing
the need to do it at build time.
2. It replaces the shortcode variable replacement method with
`@variable@` style, simply for easier sed invocations when required.
3. It removes unused files and moves the docs up a level as cleanup.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.
<img width="1293" alt="图片"
src="c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#26104 . Only a quick fix, the UI is not perfect.
Before:
<details>
</details>
After:
<details>
</details>
We are now:
- Making sure there is no existing access token with the same name
- Making sure the given scopes are valid (we already did this before but
now we have a message)
The logic is mostly taken from
a12a5f3652/routers/api/v1/user/app.go (L101-L123)Closes#26044
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Extract from https://github.com/go-gitea/gitea/pull/26043, just the
padding increase.
Before and After (hard to notice, but it's there):
<img width="427" alt="Screenshot 2023-07-25 at 19 37 12"
src="9543dcda-eccb-4739-b7dd-06b076108ab4">
<img width="420" alt="Screenshot 2023-07-25 at 19 37 26"
src="0a9c3724-81a1-4c67-a13b-4b728a51fc3a">
Co-authored-by: Giteabot <teabot@gitea.io>
Agenda:
This PR contains UI fixes for release tag page / wiki page /
subscription page.
Here is the list of changes made in this PR.
1. Release tag page
a. In the New Release page the whole ui got change. Now it is covering
in full page page with mobile view port. Description about the release
the editor preview now has a min-height. and the check boxes for
`Prerelease` and option are left aligned. Couple of divider are added.
2. Subscription page:
a. In the subscription page the ui was distorted in mobile view. Now its
fix. Couple of unused styles were removed.
3. Create Wiki page:-
a. In the page the preview of markdown is now contains a fix min-height
so this it will not distorted in desktop view and a divider is added
before action buttons. Couple of unused styles were removed.
# Before
## Release page
<img width="1391" alt="image"
src="319dec2e-08cf-40c5-920a-d651930ee28e">
<img width="494" alt="image"
src="03249f40-2d36-4552-bb93-43832aac2f8b">
<img width="1390" alt="image"
src="bf8b2d31-4857-480b-abd9-66a3ae6e24d8">
<img width="484" alt="image"
src="c3a58210-a337-4c8e-89a6-edb3975986bb">
Editor
<img width="958" alt="image"
src="3bdd299d-d12b-4774-ace9-7184b1a57b18">
Editor preview
<img width="1293" alt="image"
src="2b61c528-c018-4800-ab86-07aae56adecd">
<img width="484" alt="image"
src="ff7bc5ee-9dc0-4f78-a0b1-94277ab27700">
#### After
<img width="1439" alt="image"
src="94f7e073-5977-40bd-98ef-0711ed0815cc">
<img width="1384" alt="image"
src="83e3105f-c1ee-4329-b90f-8bb724dac50f">
<img width="1440" alt="image"
src="05f024a5-52eb-4072-8599-d6ca12f6fad1">
<img width="1387" alt="image"
src="c73f069b-572a-4a13-aaa9-fc5b4dd3420d">
<img width="1440" alt="image"
src="2f98f012-8e64-4a12-9595-5acdef18f85c">
Markdown preview change
<img width="1368" alt="image"
src="31e583ec-48f6-4f1a-8b56-0164fcb127a5">
Wiki page
Before
<img width="1393" alt="image"
src="9c9cfdf6-3c2a-4f47-883b-76624d96f9a0">
<img width="499" alt="image"
src="522ad573-1ad2-4fa2-8bf7-48a3dded14e7">
Preview of mark down.
<img width="488" alt="image"
src="998f3c25-9fca-43c8-b1ff-648aab291727">
Footer
<img width="490" alt="image"
src="89c6cf4e-4599-4403-bac8-285efdd9361a">
After
<img width="1389" alt="image"
src="1ee0fc72-f864-44c0-b2e4-e0e8a8470204">
<img width="498" alt="image"
src="b35b9a5d-8e26-4869-a6ed-6cef1f4a87a6">
<img width="499" alt="image"
src="b40bcbaa-fca6-42ab-9556-f950811b565d">
Preview tab block has min-height
<img width="1392" alt="image"
src="4a53d6c2-596c-423a-91b1-533cef734f93">
Mobile view
<img width="496" alt="image"
src="c5ffc4c9-3c21-4cad-bc32-2ea3f0644a08">
<img width="497" alt="image"
src="08dd560f-4333-41ec-95b9-8154910d2254">
<img width="496" alt="image"
src="9fba8f55-727b-4756-a4a6-2070c719b15b">
## Subscription page
### Before
<img width="1393" alt="image"
src="0a7d561b-f56c-4ebe-93bd-952abecd437f">
<img width="492" alt="image"
src="4dc44d0c-ea81-4130-8afb-8f271c029e8a">
After
<img width="1394" alt="image"
src="a3567e30-2b5b-49d6-9ecb-2ab481ea4d36">
<img width="494" alt="image"
src="024da9e2-dfc4-4672-95cc-a6ac034d9712">
<img width="508" alt="image"
src="b748ecea-427c-4f8b-a1bf-08f82f9a42e6">
Replace #21790
And close#25965 by the way (it needs a separate fix for 1.20)
Major changes:
1. Move "gitea convert" to "gitea doctor conver". The old "gitea doctor"
still works as a hidden sub-command (to avoid breaking)
2. Do not write "doctor.log" by default, it's not useful in most cases
and causes bugs like 25965
3. Improve documents
4. Fix the "help" commands. Before, the "./gitea doctor" can't show the
sub-command help correctly (regression of the last cli/v2 refactoring)
After this PR:
```
./gitea help # show all sub-commands for the app
./gitea doctor # show the sub-commands for the "doctor"
./gitea doctor help # show the sub-commands for the "doctor", as above
```
Before:
After:
There's a bug in the recent logic, `CalcCommitStatus` will always return
the first item of `statuses` or error status, because `state` is defined
with default value which should be `CommitStatusSuccess`
Then
``` golang
if status.State.NoBetterThan(state) {
```
this `if` will always return false unless `status.State =
CommitStatusError` which makes no sense.
So `lastStatus` will always be `nil` or error status.
Then we will always return the first item of `statuses` here or only
return error status, and this is why in the first picture the commit
status is `Success` but not `Failure`.
af1ffbcd63/models/git/commit_status.go (L204-L211)
Co-authored-by: Giteabot <teabot@gitea.io>
This problem occurs because in #25839, the warning status has been
removed, but there is something in the tmpl that hasn't been changed.
related #25839close#26118
Before:
After:
After workflow finished, if you rerun a single job, the workflow status
will become to `Running` which is not correct as no jobs are running in
this workflow.
Resolves#25057
This adds a E-Mail field to Organisations. The E-Mail is just shown on
the Profile when it is visited by a logged in User. The E-mail is not
used for something else.
**Screenshots:**
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: Denys Konovalov <privat@denyskon.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Regression of #25408.
`LFS_JWT_SECRET_URI` and `LFS_JWT_SECRET` are under the `server`
section, not `lfs`.
So each time gitea restarts, it resets `LFS_JWT_SECRET`.
<img width="1378" alt="image"
src="527ec9b9-eea2-4334-a274-6d1471456edd">
- cancel running jobs if the event is push
- Add a new function `CancelRunningJobs` to cancel all running jobs of a
run
- Update `FindRunOptions` struct to include `Ref` field and update its
condition in `toConds` function
- Implement auto cancellation of running jobs in the same workflow in
`notify` function
related task: https://github.com/go-gitea/gitea/pull/22751/
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
This is a simple PR which moves the `GetListener` function to a
`DefaultGetListener` function, and changes `GetListener` to be a
variable which by default points to the `DefaultGetListener` function.
This allows people who may exist quasi-downstream of Gitea to create
alternate "GetListener" functions, with identical signatures, which
return different implementations of the `net.Listener` interface. This
approach is expressly intended to be non-invasive and have the least
possible impact on the gitea codebase. A previous version of this idea
was rejected before: https://github.com/go-gitea/gitea/issues/15544 but
because of issues like: https://github.com/go-gitea/gitea/issues/22335 I
**really** think that recommending people configure proxies by hand is
exactly the wrong way to do things(This is why there is a Tor Browser.).
This tiny change lets me put proper hidden service configuration into
single `i2p.go` file which lives in `modules/graceful/` and which never
has to be checked in to your codebase or affect your dependencies or
bloat your project in any way, it can live on a branch in my fork and
I'll fast-forward every release and never the twain shall meet.
The main use-case for this is to listen on Peer-to-Peer networks and
Hidden Services directly without error-prone and cumbersome
port-forwarding configuration. For instance, I might implement an
"I2PGetListener" as follows:
```Go
// adapted from i2p.go which is unchecked-in in my modules/graceful/ directory
import "github.com/eyedeekay/onramp"
var garlic = &onramp.Garlic{}
func I2PGetListener(network, address string) (net.Listener, error) {
// Add a deferral to say that we've tried to grab a listener
defer GetManager().InformCleanup()
switch network {
case "tcp", "tcp4", "tcp6", "i2p", "i2pt":
return garlic.Listen()
case "unix", "unixpacket":
// I2P isn't really a replacement for the stuff you use Unix sockets for and it's also not an anonymity risk, so treat them normally
unixAddr, err := net.ResolveUnixAddr(network, address)
if err != nil {
return nil, err
}
return GetListenerUnix(network, unixAddr)
default:
return nil, net.UnknownNetworkError(network)
}
}
```
I could then substitute that GetListener function and be 50% of the way
to having a fully-functioning gitea-over-hidden-services instance
without any additional configuration(The other 50% doesn't require any
code-changes on gitea's part).
There are 2 advantages here, one being convenience, first this turns
hidden services into a zero-configuration option for self-hosting gitea,
and second safety, these Go libraries are passing around
hidden-service-only versions of the net.Addr struct, they're using
hidden-service-only versions of the sockets, which are both expressly
designed to never require access to any information outside the hidden
service network, manipulating the application so it reveals information
about the host becomes much more difficult, and some attacks become
nearly impossible. It also opens up TLS-over-Hidden Services support
which is niche right now, of course, but in a future where gitea
instances federate if hidden services want to be part of the federation
they're probably going to need TLS certificates. They don't need to be
painful to set up.
This doesn't fix an open issue, but it might affect:
- https://github.com/go-gitea/gitea/issues/22335 - my `i2p.go` file
actually has a mod that fixes this but it requires adding a handful of
new dependencies to gitea and isn't compatible with the normal way you
guys recommend using a proxy so I don't think it's ready to send to you
as a PR, but if I can find a non-invasive way to fix it I will.
- https://github.com/go-gitea/gitea/issues/18240
I hereby agree to the Code of Conduct published here:
8b89563bf1/CODE_OF_CONDUCT.md
I have read and understood the recommendations published here:
8b89563bf1/CONTRIBUTING.md
Thank you for your consideration.
---------
Co-authored-by: eyedeekay <idk@mulder>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#24544
Changes:
- Create `action_tasks_version` table to store the latest version of
each scope (global, org and repo).
- When a job with the status of `waiting` is created, the tasks version
of the scopes it belongs to will increase.
- When the status of a job already in the database is updated to
`waiting`, the tasks version of the scopes it belongs to will increase.
- On Gitea side, in `FeatchTask()`, will try to query the
`action_tasks_version` record of the scope of the runner that call
`FetchTask()`. If the record does not exist, will insert a row. Then,
Gitea will compare the version passed from runner to Gitea with the
version in database, if inconsistent, try pick task. Gitea always
returns the latest version from database to the runner.
Related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/10
- Runner: https://gitea.com/gitea/act_runner/pulls/219
If the log file can't be opened, what should it do? panic/exit? ignore
logs? fallback to stderr?
It seems that "fallback to stderr" is slightly better than others ....
Replace `github.com/gogs/cron` with `github.com/go-co-op/gocron` as the
former package is not maintained for many years.
---------
Co-authored-by: delvh <dev.lh@web.de>
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
Some "text truncate email" code were just copied&pasted, they are not
suitable for most admin tables.
For the table layouts, some "max-width" helpers could be very helpful.
At least, we can get rid of the confusing "email" CSS class.
The previous text implied that content was going to be added later, but
I don't think we should make such assumptions.
<img width="346" alt="image"
src="518133a7-2c4c-4463-91ee-5fe439898032">
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Send request to get branch/tag list, use loading icon when waiting for
response.
- Only fetch when the first time branch/tag list shows.
- For backend, removed assignment to `ctx.Data["Branches"]` and
`ctx.Data["Tags"]` from `context/repo.go` and passed these data wherever
needed.
- Changed some `v-if` to `v-show` and used native `svg` as mentioned in
https://github.com/go-gitea/gitea/pull/25719#issuecomment-1631712757 to
improve perfomance when there are a lot of branches.
- Places Used the dropdown component:
Repo Home Page
<img width="1429" alt="Screen Shot 2023-07-06 at 12 17 51"
src="6accc7b6-8d37-4e88-ae1a-bd2b3b927ea0">
Commits Page
<img width="1431" alt="Screen Shot 2023-07-06 at 12 18 34"
src="2d0bf306-d1e2-45a8-a784-bc424879f537">
Specific commit -> operations -> cherry-pick
<img width="758" alt="Screen Shot 2023-07-06 at 12 23 28"
src="1e557948-3881-4e45-a625-8ef36d45ae2d">
Release Page
<img width="1433" alt="Screen Shot 2023-07-06 at 12 25 05"
src="3ec82af1-15a4-4162-a50b-04a9502161bb">
- Demo
d45d266b-3eb0-465a-82f9-57f78dc5f9f3
- Note:
UI of dropdown menu could be improved in another PR as it should apply
to more dropdown menus.
Fix#14180
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Reduce margins around admin boxes and reduce sidebar size from 275px to
240px. This is the same 16px margin we use on issue pages.
Before and After:
<img width="1270" alt="Screenshot 2023-07-21 at 00 28 11"
src="f9b0dcb0-8f7e-49b4-b130-54bf31c142fd">
<img width="1271" alt="Screenshot 2023-07-21 at 00 30 51"
src="ddd75d59-9ab9-4061-8989-852e89727560">
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
After RPM is supported with https://github.com/go-gitea/gitea/pull/23380
let's show the user
how to add the repo and install the RPM via all common package managers.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Close#25906
Succeeded logs:
```
[I] router: completed GET /root/test/issues/posters?&q=%20&_=1689853025011 for [::1]:59271, 200 OK in 127.7ms @ repo/issue.go:3505(repo.IssuePosters)
[I] router: completed GET /root/test/pulls/posters?&q=%20&_=1689853968204 for [::1]:59269, 200 OK in 94.3ms @ repo/issue.go:3509(repo.PullPosters)
```
The package `github.com/nfnt/resize` is deprecated and archived by the
author. `github.com/oliamb/cutter` is not maintained since 2018. We
could use `golang.org/x/image/draw` instead.
This change adds an entry to the `links` field of the
`/.well-known/webfinger` response. The new entry points to the `appURL`
as an OpenID issuer. This is consistent with the output of
`/.well-known/openid-configuration`, which also uses the value of
`appURL`.
This change is required for Tailscale SSO to work, as it uses the OpenID
Issuer URL when querying the Tailscale user email during signup/login
([docs](https://tailscale.com/kb/1240/sso-custom-oidc/#webfinger-setup)).
Fix#25858
The option `dissmiss stale approvals` was listed on protected branch but
never implemented. This PR fixes that.
<img width="1006" alt="图片"
src="60bfa968-4db7-4c24-b8be-2e5978f91bb9">
<img width="1021" alt="图片"
src="8dabc14d-2dfe-40c2-94ed-24fcbf6e0e8f">
Followup to https://github.com/go-gitea/gitea/pull/25935 which has
missed to change the icon on the repolist because the logic is not
shared with templates.
Co-authored-by: Giteabot <teabot@gitea.io>
- Tell the renderer to use the `document` mode, so it's consistent with
other renderers.
- Use the same padding as `.file-view.markup`, so it's consistent with
other containers that contain markup rendering.
- Resolves https://codeberg.org/forgejo/forgejo/issues/833
Co-authored-by: Gusted <postmaster@gusted.xyz>
This commit removes the hard-coded height of 500px, using that as a
max-height instead. The height of items in the dropdown menu, assuming a
default font size of 16px, is 36px, so the old CSS would cause overly
large dropdown menus in instances where less than 14 languages are
offered.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1000
Co-authored-by: rome-user <rome-user@noreply.codeberg.org>
Co-authored-by: Giteabot <teabot@gitea.io>
Bumping `github.com/golang-jwt/jwt` from v4 to v5.
`github.com/golang-jwt/jwt` v5 is bringing some breaking changes:
- standard `Valid()` method on claims is removed. It's replaced by
`ClaimsValidator` interface implementing `Validator()` method instead,
which is called after standard validation. Gitea doesn't seem to be
using this logic.
- `jwt.Token` has a field `Valid`, so it's checked in `ParseToken`
function in `services/auth/source/oauth2/token.go`
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: Giteabot <teabot@gitea.io>
Since OAuth2 will callback the root URL, if the user starts signing in
from a wrong host, Gitea will return 500 because it cannot find the
session.
<details>
<summary>How to reproduce</summary>
<img width="901" alt="image"
src="2c2e255c-e13e-4a11-9be7-b226bee54920">
<img width="1014" alt="image"
src="b31cfcf6-a320-483d-9ce5-ba8562f065e1">
</details>
So show the mismatched ROOT_URL warning on the sign-in page if OAuth2 is
enabled.
<img width="1015" alt="image"
src="99e80b17-c790-49a3-bbf2-2bd9396a7daa">
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
With the introduction of Actions, the pending commit icon has changed
from yellow to grey for Drone integrations which never set the "running"
status, so it stays in "pending" until completion.
I find it better to have this icon colored like on 1.19. Now both the
"pending" and "running" icons look the same, but I guess we could add an
animation to the "running" state similar to GitHub has to it later.
Before:
<img width="339" alt="Screenshot 2023-07-17 at 19 14 19"
src="2f4886e4-74fd-42ea-b59e-9af8f141bf1f">
After:
<img width="335" alt="Screenshot 2023-07-17 at 19 14 30"
src="53189642-e72d-47f6-9cbe-f14eda28f730">
Also, it matches GH's icon:
<img width="466" alt="image"
src="5804ff90-d223-4a3c-8093-7a9abbaacf87">
---------
Co-authored-by: delvh <dev.lh@web.de>
Move `public/*` to `public/assets/*`
Some old PRs (like #15219) introduced inconsistent directory system.
For example: why the local directory "public" is accessed by
`http://site/assets`? How to serve the ".well-known" files properly in
the public directory?
For convention rules, the "public" directory is widely used for the
website's root directory. It shouldn't be an exception for Gitea.
So, this PR makes the things consistent:
* `http://site/assets/foo` means `{CustomPath}/public/assets/foo`.
* `{CustomPath}/public/.well-known` and `{CustomPath}/public/robots.txt`
can be used in the future.
This PR is also a prerequisite for a clear solution for:
* #21942
* #25892
* discourse.gitea.io: [.well-known path serving custom files behind
proxy?](https://discourse.gitea.io/t/well-known-path-serving-custom-files-behind-proxy/5445/1)
This PR is breaking for users who have custom "public" files (CSS/JS).
After getting approvals, I will update the documents.
----
## ⚠️ BREAKING ⚠️
If you have files in your "custom/public/" folder, please move them to
"custom/public/assets/".
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Regression: https://github.com/go-gitea/gitea/pull/24805Closes: #25945
- Disallow `javascript`, `vbscript` and `data` (data uri images still
work) url schemes even if all other schemes are allowed
- Fixed older `cbthunderlink` tests
---------
Co-authored-by: delvh <dev.lh@web.de>
The "creating dir/file during load config" is a longstanding and complex
problem.
This PR only does a quick patch, it still needs more refactorings in the
future.
Fix#25938
Previously, `sortablejs` was imported twice, once synchronously and once
asynchronously, leading to webpack creating duplicate output code (once
in the index bundle, and once in a separate chunk). Fix this by always
asynchronously importing it. This was one of the build warnings observed
when trying to build with vite.
Before, in dev mode, there might be some error logs like:
```
2023/07/17 13:54:51 ...s/assetfs/layered.go:221:WatchLocalChanges() [E] Unable to watch directory .: lstat /data/work/gitea/custom/templates: no such file or directory
```
Because there is no "custom/templates" directory.
After: ignore such error, no such error message anymore.
Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.
This PR adds a notice that the system is shutting down because of the
deprecated setting.
We can select PRs to open/close them by one click, but we forgot to
check whether it is merged.
You can get an opening merged PR:
You can confirm this in:
https://try.gitea.io/yp05327/testrepo/pulls/5
Use a real button and add an aria-label.
Additionally, show the button whenever it is focused.
See https://codeberg.org/forgejo/forgejo/issues/998 for explanation.
Our handling of this button is now equal to that of GitHub.
Nothing has changed visually.
Before: (Owner list is empty)
After: (Disable the button and show the error info)
Before:
emmm, don't know how to write a good title to describe this issue.
If you have a good idea, I can change the title.
The fix code is copied from L122. Not sure it is right or not.
@lunny
Maybe `DefaultBranchBranch` is also typo?
Two `Branch` in variable name .
When only the case of the username changes and the new username is
consistent with the lowercase username of the old user name, update the
owner name of the repo, and keep the original logic consistent with
other conditions.
example: your username is `gitea`, lowercase username is `gitea`,repo
url is `.../gitea/{repo}`, you changed username to `Gitea` or `GiTea` or
other, but the lowercase username is still `gitea`, the repo url is
still `.../gitea/{repo}`.
this pr fixed it,keep username and repo url consistent.
Before:
After:
the stacking takes up screen space - display the tabs as the navigation
bar. github uses the same layout.
Screenshots (left before, right after):
Large screen:
Issue filters are being used on repo list page and on milestone issues
page, and the code is mostly duplicated.
This PR does the following changes:
- move issue filters into a shared template
- allow filtering milestone issues by project, so no need to hide this
filter on milestone issues page
- remove some dead code (e. g. issue actions in milestone issues
template)
- fix label filter dropdown width
---------
Co-authored-by: 6543 <6543@obermui.de>
The `FileBlame` function looks strange, it has `revision` as argument
but doesn't use it.
Since the function never be used, I think we could just remove it.
If anyone thinks it should be kept, please help fix `revision`.
Co-authored-by: Giteabot <teabot@gitea.io>
Before:
After:
This issue comes from the change in #25468.
`LoadProject` will always return at least one record, so we use
`ProjectID` to check whether an issue is linked to a project in the old
code.
As other `issue.LoadXXX` functions, we need to check the return value
from `xorm.Session.Get`.
In recent unit tests, we only test `issueList.LoadAttributes()` but
don't test `issue.LoadAttributes()`. So I added a new test for
`issue.LoadAttributes()` in this PR.
---------
Co-authored-by: Denys Konovalov <privat@denyskon.de>
Related issue: #18368
It doesn't seem right to "guess" the file encoding/BOM when using API to
upload files.
The API should save the uploaded content as-is.
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25726#17846 chose an incorrect WORK_DIR path for docker root image.
Gitea's work-path was already used as the base path for various paths
(like AppDataPath), so, the work-path should be mounted to a volume in a
docker image.
Now, for docker root image, it's unavoidable to mix the
WorkPath/CustomPath/AppDataPath in the same directory ("/data/gitea"),
because some of them have already been mixed.
Some directories in the screenshot are for "CustomPath" , while others
are for "AppDataPath", due to the technical debts in old code:
```
CUSTOM_PATH="/data/gitea"
APP_DATA_PATH = /data/gitea
```
<details>
</details>
This PR is breaking but this is the only way at the moment to avoid
users losing their data accidently
Co-authored-by: Giteabot <teabot@gitea.io>
All 3 tabs of the PR (Conversation, Commits and Files changed) should
show the edit title button.
Before this commit the edit button was not shown on commits tab
Screenshots:
After:
Before:
Just for reference the edit button in files changed tab:
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #25580Fix#19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
This PR does various modifications on the issue list shared template:
- restructure layout to achieve better responsiveness
- fix various style issues
- restructure styles (better result with less code :)
- remove numerous `gt-*` patches and other unneeded classes -> use
existing css classes
<details>
<summary>Before:</summary>
</details>
<details>
<summary>After:</summary>
</details>
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#25627
1. `ctx.Data["Link"]` should use relative URL but not AppURL
2. The `data-params` is incorrect because it doesn't contain "page". JS
can simply use "window.location.search" to construct the AJAX URL
3. The `data-xxx` and `id` in notification_subscriptions.tmpl were
copied&pasted, they don't have affect.
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
To mock a handler:
```go
web.RouteMock(web.MockAfterMiddlewares, func(ctx *context.Context) {
// ...
})
defer web.RouteMockReset()
```
It helps:
* Test the middleware's behavior (assert the ctx.Data, etc)
* Mock the middleware's behavior (prepare some context data for handler)
* Mock the handler's response for some test cases, especially for some
integration tests and e2e tests.
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Monaco can not deal with color formats other than 6-digit hex, so we
convert the colors for it via new
[`tinycolor2`](https://github.com/bgrins/TinyColor) dependency (5kB
minzipped).
Also, with the addition of the module, we can replace the existing
`hexToRGBColor` usage, I verified it is compatible with the current
tests before removing the function.
Fixes: https://github.com/go-gitea/gitea/issues/25770
Minor tweaks to repo topics:
- Use gap instead of margin to align "Manage Topics" when no topics
present
- Add margin to description instead
Before:
<img width="1232" alt="Screenshot 2023-07-08 at 13 08 15"
src="a5d3586c-6cbf-4b74-8137-11d91f2cbb45">
<img width="1233" alt="Screenshot 2023-07-08 at 13 08 05"
src="59b18d93-e4cb-4f2b-9bc2-d6aa63f93827">
After:
<img width="1232" alt="Screenshot 2023-07-08 at 13 08 42"
src="470d42ad-3f7e-40f9-b0a1-203b4af77eb9">
<img width="1231" alt="Screenshot 2023-07-08 at 13 08 32"
src="42d18048-748c-4a3f-ab89-3403866cef34">
---------
Archive text title center align
<details>
<summary>Screen shots</summary>
Before
After
BTW On github
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Changes:
* Rename gt-tl/gt-tc/gt-tr to gt-text-left/gt-text-center/gt-text-right
* The gt-ab and gt-br-0 are removed because they are not needed anymore
* Fix the clone dropdown button padding by ":not(.icon)"
Before:
<details>
</details>
After:
<details>
</details>
Fixes#25758
Co-authored-by: Giteabot <teabot@gitea.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Replace esbuild's rudimentary CSS minifier with [Lightning
CSS](https://github.com/parcel-bundler/lightningcss), which results in
around 4% smaller CSS bundle size, index.css goes from 608K to 584K.
The module is quite new but has active use in the Parcel bundler, and as
of yesterday is also under experimental support in Vite, so I trust it
that bugs will be sorted out quickly.
Before: `assets by path css/*.css 959 KiB`
After: `assets by path css/*.css 933 KiB`
I did give this a cursory test and everything seems to be in order.
A couple of notes:
* Future changes should refactor arguments into a struct
* This filtering only is supported by meilisearch right now
* Issue index number is bumped which will cause a re-index
Fix#25736
Caused by #24048
Right now we only check the activity type for `pull_request` event when
`types` is specified or there are no `types` and filter. If a workflow
only specifies filters but no `types` like this:
```
on:
pull_request:
branches: [main]
```
the workflow will be triggered even if the activity type is not one of
`[opened, reopened, sync]`. We need to check the activity type in this
case.
Co-authored-by: Giteabot <teabot@gitea.io>
I think hiding the add file button for mirror repositories that can keep the ui clean.
Before:
After:
Hi Gitea Team,
I would like to apply as a maintainer.
I don't have that much in-depth knowledge of the codebase, but I would
like to help to review PRs for the beginning in my free time and
contribute in frontend, backend tasks and new proposals.
Here is my PR list:-
https://github.com/go-gitea/gitea/pulls?q=is%3Apr+author%3Apuni9869+is%3Amerged+
The code was just copied&pasted, it causes problems now.
There are a lot (for every package) broken translations. eg:
```
# en-US
conda.documentation = For more information on the Conda registry, see
<a target="_blank" rel="noopener noreferrer" href="%s">the documentation</a>.
# fr-FR (and many languages)
conda.documentation=Pour plus d'informations sur le registre Conda, voir
<a target="_blank" rel="noopener noreferrer" href="https://docs.gitea.io/fr-fr/packages/conda/">la documentation</a>.
```
To resolve the problem fundamentally, use a general string, and trigger
the re-translating on Crowdin side.
And, it should really really really avoid introducing too much
copied&pasted code .......
Fixes#25693
The commits table appearance fix in #25634 was incomplete and caused a
regression. This PR fixes that issue and removes some unneeded CSS
classes because of the proper fix.
<details>
<summary>Before</summary>
</details>
<details>
<summary>After</summary>
</details>
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix ::User Profile Page Project Tab Have Inconsistent Layout and Style
Added the big_avator for consistency in the all header_items tabs.
Fixes: #24871
> ### Description
> in the user profile page the `Packages` and `Projects` tab have small
icons for user but other tabs have bigger profile picture with user
info:
>
> ### Screenshots
> ### **For Packages And Projects:**
>
>
> ### **For Other Tabs:**
>
>
## Before
## After changes
Project View
<img width="1394" alt="image"
src="95d181d7-8e61-496d-9899-7b825c91ad56">
Packages View
<img width="1378" alt="image"
src="7f5fd60f-6b18-4fa8-8c56-7b0d45d1a610">
## Org view for projects page
<img width="1385" alt="image"
src="6400dc89-a5ae-4f0a-831b-5b6efa020d89">
## Org view for packages page
<img width="1387" alt="image"
src="4e1e9ffe-1e4b-4334-8657-de11b5fd31d0">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Remove unnecessary `if opts.Logger != nil` checks.
* For "CLI doctor" mode, output to the console's "logger.Info".
* For "Web Task" mode, output to the default "logger.Debug", to avoid
flooding the server's log in a busy production instance.
Co-authored-by: Giteabot <teabot@gitea.io>
gitea allows to create empty PRs.
Currently when you need approvals for a merge, you have to manually add
/files to the url to get to the files tab to approve / reject the PR.
This PR allows to open the files tab via the normal tab / link and then
fixes the layout of the files tab.
**Screenshots:**
Before:
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Set the correct permissions on the .ssh directory and authorized_keys
file, or sshd will refuse to use them and lead to clone/push/pull
failures.
It could happen when users have copied their data to a new volume and
changed the file permission by accident, and it would be very hard to
troubleshoot unless users know how to check the logs of sshd which is
started by s6.
Co-authored-by: Giteabot <teabot@gitea.io>
To record which command is slow, this PR adds a debug log for slow git
operations.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: delvh <dev.lh@web.de>
Various small enhancements to the actions list. Before and after:
<img width="1264" alt="Screenshot 2023-06-30 at 00 11 40"
src="bb4162ee-cdcf-4a73-b05e-f9521562edbb">
<img width="1264" alt="Screenshot 2023-06-30 at 00 09 51"
src="52a70ea9-4bb3-406e-904b-0fdaafde9582">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix regression of #5363 (so long ago).
The old code definded a document mapping for `issueIndexerDocType`, and
assigned it to `BleveIndexerData` as its type. (`BleveIndexerData` has
been renamed to `IndexerData` in #25174, but nothing more.) But the old
code never used `BleveIndexerData`, it wrote the index with an anonymous
struct type. Nonetheless, bleve would use the default auto-mapping for
struct it didn't know, so the indexer still worked. This means the
custom document mapping was always dead code.
The custom document mapping is not useless, it can reduce index storage,
this PR brings it back and disable default mapping to prevent it from
happening again. Since `IndexerData`(`BleveIndexerData`) has JSON tags,
and bleve uses them first, so we should use `repo_id` as the field name
instead of `RepoID`.
I did a test to compare the storage size before and after this, with
about 3k real comments that were migrated from some public repos.
Before:
```text
[ 160] .
├── [ 42] index_meta.json
├── [ 13] rupture_meta.json
└── [ 128] store
├── [6.9M] 00000000005d.zap
└── [256K] root.bolt
```
After:
```text
[ 160] .
├── [ 42] index_meta.json
├── [ 13] rupture_meta.json
└── [ 128] store
├── [3.5M] 000000000065.zap
└── [256K] root.bolt
```
It saves about half the storage space.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Right now when clicking on loadmore on files change page, if the loaded
content is image, it will be always in load status:
39e449b6-067a-474c-9443-9dd98d5bbfe2
This PR fixes this by adding `initImageDiff ` to `onShowMoreFiles `
After:
87bbb13e-0064-4a6e-a7ad-0f0060eb8bff
This will prevent the most common cases of SVG shrinking because lack of
space. I evaluated multiple options and this seems to be the one with
the least impact in size and processing cost, so I went with it.
Unfortunately, CSS can not dynamically convert `16` obtained from
`attr()` to `16px`, or else a generic solution for all sizes would have
been possible. But a solution is [in
sight](https://developer.mozilla.org/en-US/docs/Web/CSS/attr#type-or-unit)
with `attr(width px)` but no browser supports it currently.
Add a few extra test cases and test functions for the collaboration
model to get everything covered by tests (except for error handling, as
we cannot suddenly mock errors from the database).
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/825
Co-authored-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25628
Diff with ignoring space:
https://github.com/go-gitea/gitea/pull/25629/files?diff=unified&w=1
The "modal" shouldn't appear between "ui attached segment", otherwise
these segments lose margin-top.
After the fix:
<details>
</details>
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Replace #25446, fix#25438
All "cancel" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
This is a complete fix for all modal dialogs.
The major change is "modules/aria/modal.js", "devtest" related code is
for demo/test purpose.
Fix#10388
This PR adds a status icon for every branch which has a status check for
the latest commit on branch list page.
<img width="1313" alt="图片"
src="727cd540-d03a-40c6-a7dd-e87c118af0ac">
Close#24593
Some behavior:
- If log step line in hash exists, expand the step and scroll to the log
line.
- If step exists but line not exists, the step will be expanded.
- If step not exists, stays on the job's page.
Some Notes:
- Changed mounted to async because need to await for first `loadJob` so
`currentJobStepsStates` can be initialized and used in
`hashChangeListener `.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There are too many files under `routers/web/repo` and the file
`routers/web/repo/setting.go` is too big.
This PR move all setting related routers' body functions under
`routers/web/repo/setting` and also split `routers/web/repo/setting.go`
This prevents the disk from overflowing with auth keys file
Fixes#17117
## ⚠️ BREAKING
This changes the default option for creating a backup of the authorized
key file when an update is made to default to false.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
the PullHeadCommitID is not always available when the PR is merged.
Not sure if this is the best solution but in my simple tests it looks
like this fixes the problem - happy to get any feedback.
hopefully fixes https://github.com/go-gitea/gitea/issues/24813
When branch's commit CommitMessage is too long, the column maybe too
short.(TEXT 16K for mysql).
This PR will fix it to only store the summary because these message will
only show on branch list or possible future search?
Resolve#24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
This pull request fades read-only checkboxes and checkmark, and it makes
the checkboxes act more read-only/disabled by not changing the
border-color when clicked.
Examples using light mode:
| Before | After |
| - | - |
| 
| 
|
| 
| 
|
| | read-only checkboxes and checkmark are faded<br>and the checkboxes
act more read-only/disabled |
Fixes/Closes/Resolves #25076
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Related #25559
Current behaviour:
1. Deletion of a package version
2. Redirect to the owners package list
New behaviour:
1. Deletion of a package version
2.1. If there are more versions available, redirect to the package again
2.2. If there are no versions available, redirect to the owners package
list
Should look exactly like before for normal dividers. "Horizontal" ones
look better because they no longer use image backgrounds.
<img width="917" alt="Screenshot 2023-06-27 at 19 07 56"
src="d97d8dec-6859-44a8-85ba-e4549b4dd9df">
<img width="914" alt="Screenshot 2023-06-27 at 19 05 58"
src="8bf98544-2d82-4ebf-ac68-d6dc237bd6b2">
<img width="1246" alt="Screenshot 2023-06-27 at 19 00 42"
src="36a6bb21-6029-4f53-8bee-535f55c66fed">
<img width="344" alt="Screenshot 2023-06-27 at 18 58 15"
src="a9e70aee-8e6b-4ea1-9e93-19c9f96aec6e">
<img width="823" alt="Screenshot 2023-06-27 at 18 56 22"
src="e7a497cd-f262-4683-8872-23c3c8cce32f">
<img width="330" alt="Screenshot 2023-06-27 at 19 21 11"
src="42f24149-a655-4c7e-bd26-8ab52db6446b">
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fomantic's tables have too much padding. Reduce it so we have more
information density in them. Especially the admin tables need this
because they are bursting already because of column count.
## Admin repolist before and after
<img width="909" alt="Screenshot 2023-06-28 at 20 27 55"
src="954c925c-8db5-47ce-ae51-a2168b857014">
<img width="897" alt="Screenshot 2023-06-28 at 20 36 03"
src="0bddc09a-9117-48b3-a17e-3d34c58d8d3d">
## Other tables
<img width="1230" alt="Screenshot 2023-06-28 at 20 36 22"
src="38f555b6-a7ce-416a-9f1f-706eaf18863b">
<img width="1236" alt="Screenshot 2023-06-28 at 20 26 37"
src="82b2878e-358c-4dc2-a6b4-c66e43cd2dfb">
<img width="1231" alt="Screenshot 2023-06-28 at 20 59 30"
src="c6a92e55-a3a3-4c80-9a0d-50aebb49886c">
Files table is unaffected because it has custom padding already.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Before:
<img width="364" alt="Screen Shot 2023-06-20 at 11 59 11"
src="ad284b7e-8d21-43be-b178-bbcfd37cb5bd">
Might trigger many posts when keep clicking the buttons above.
<img width="448" alt="Screen Shot 2023-06-20 at 11 52 28"
src="a60aa6ac-af74-45e4-b13a-512b436b81b0">
<img width="678" alt="Screen Shot 2023-06-20 at 11 52 37"
src="d6662700-3643-4cc7-a2ec-64e1c0f5fbdb">
After (PR sidebar, Same for issue):
9df3ad1f-e29c-439b-8bde-e6b917d63cc6
For delete, it is using `base/modal_actions_confirm` subtemplate, and we
might need another general solution for this (maybe add another
attribute to the subtemplate or something)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
In the process of doing a bit of automation via the API, we've
discovered a _small_ issue in the Swagger definition. We tried to create
a push mirror for a repository, but our generated client raised an
exception due to an unexpected status code.
When looking at this function:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L236-L240)
We see it defines `201 - Created` as response:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L260-L262)
But it actually returns `200 - OK`:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L373)
So I've just updated the Swagger definitions to match the code😀
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Use our existing color palette to map to the 16 basic ansi colors. This
is backwards-compatible because it aliases the existing color names.
Side note: I think the colors in `console.css` for console file
rendering are incomplete, but fixing those is out of scope here imo.
Before and after:
<img width="542" alt="Screenshot 2023-06-28 at 00 26 12"
src="86d41884-bc47-4e85-8aec-621eb7320f0b">
<img width="546" alt="Screenshot 2023-06-28 at 00 28 24"
src="39fa3b37-d49e-49b1-b6bc-390ac8ca24b2">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Right now some sort buttons beside search input are unclickable because
#25338 removed `max-width` and the sort button is using float, sort
button is then covered by the `input`.
The way to fix this in this PR is changing the layout to `flex` and put
`input form` and sort `button` into `secondary menu`.
After:
<img width="1411" alt="Screen Shot 2023-06-26 at 16 40 52"
src="63c12b17-793a-4ae7-bbda-f67b13b87212">
<img width="1428" alt="Screen Shot 2023-06-26 at 16 34 06"
src="cb7d967e-355d-4cb0-955c-6139580fc17a">
<img width="716" alt="Screen Shot 2023-06-26 at 16 34 22"
src="c74b5ef2-d46e-4487-8794-28bec984bb36">
<img width="1424" alt="Screen Shot 2023-06-26 at 16 34 32"
src="8a5fdc05-a2c5-4ec4-979d-15a21501fe14">
<img width="1425" alt="Screen Shot 2023-06-26 at 16 35 21"
src="eb73cd31-3914-4bc9-92ab-aba56f25128b">
<img width="1437" alt="Screen Shot 2023-06-26 at 16 36 14"
src="1c3b4595-bb26-491f-aa68-60dc9ab22b84">
More fix for #24981
* #24981Close#22361
* #22361
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all JS dependencies
- Enable `declaration-property-unit-disallowed-list` to forbid `em` on
`line-height`
- Rename dependency update targets to `update-js` and `update-py` and
document them
- Remove margin on Asciicast viewer
- Tested Swagger, Katex, Asciicast
<img width="1243" alt="Screenshot 2023-06-27 at 19 51 05"
src="2d2722a0-2aa7-4f4c-b8bd-17e1f3637b78">
Right now rerun icon on action view component will not be seen when
duration text length is long, because the wrapper `job-brief-info` has a
fixed width, and the svg is squeezed. The way to fix this in this PR is
to change width to `fit-content` and exchange position of duration text
and rerun svg.
Before (rerun svg not shown on hover):
<img width="1401" alt="Screen Shot 2023-06-27 at 12 53 41"
src="bb3f62ec-8c56-4dbc-96f1-718b50426d91">
After:
<img width="1409" alt="Screen Shot 2023-06-27 at 12 50 59"
src="620aa02c-2326-408d-a763-453f48f42c40">
[updates](https://github.com/silverwind/updates) now supports poetry as
well so we can use it for a new `make poetry-update` to update all
poetry dependencies.
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
A regression of #25330 : The nil "Action" should be treated as "help"
In old releases: `./gitea admin` show helps
After #25330: `./gitea admin` panics (although the code returned `nil`
if action is nil, but Golang's quirk is: nil in interface is not nil)
With this PR: `./gitea admin` shows helps as the old releases.
when trying to create a PR for an existing PRs branch combination link
to the PR directly and not just to the repo.
Before:
After:
This is my first pr, there are many things I don't understand very well,
I am very sorry, I rearranged the code and opened this new pr.
Now：
Fix#25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
The recent change on xorm for `Sync` is it will not warn when database
have columns which is not listed on struct. So we just need this warn
logs when `Sync` the whole database but not in the migrations Sync.
This PR will remove almost unnecessary warning logs on migrations.
Now below logs in CI will disappear.
```log
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column creator_id but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column is_closed but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column board_type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column closed_date_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column created_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column updated_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column card_type but struct has not related field
```
Fixes: https://github.com/go-gitea/gitea/issues/25444
Followup for some regressions from
https://github.com/go-gitea/gitea/pull/25343. Before and after:
<img width="219" alt="Screenshot 2023-06-21 at 00 25 20"
src="08fe8e01-0a16-4cdf-ad4d-0a9048408e9e">
<img width="220" alt="Screenshot 2023-06-21 at 00 25 32"
src="be25ae69-6ed0-4af5-8eeb-d7b210e7c124">
Fixes mobile button background and margins:
<img width="836" alt="Screenshot 2023-06-21 at 00 39 58"
src="d76ac1e9-747f-477c-9a42-b73e129b72ee">
Try to prevent what happened with tag `v1.21.0-dev` as outlined in
#25193.
Unfortunately, we cannot really test if it works as intended as we would
need to release a new `dev` tag for that.
Fixes#25193 (or at least attempts to).
---------
Co-authored-by: jolheiser <john.olheiser@gmail.com>
Close#20976Close#20975
1. Fix the bug: the TOC in footer was incorrectly rendered as main
content's TOC
2. Fix the layout: on mobile, the TOC is put above the main content,
while the sidebar is put below the main content
3. Auto collapse the TOC on mobile
ps: many styles of "wiki.css" are moved from old css files, so leave
nits to following PRs.
Fix regression of #25174.
The `Init` of the db indexer should return true to indicate that the
index was opened/existed, or the indexer will try to populate the index
(not really populate, just fill the queue, `Index` method of the db
indexer is a dummy).
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
Fix #25438
All non-"ok" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
As title, this is how it was inferred before
e24f651c86/Makefile (L83-L84)
We moved to actions, however `GITEA_VERSION` should still work to use
`VERSION`
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Make use of the [new
octicon](https://github.com/primer/octicons/issues/945) that indicates a
symlink to a directory:
<img width="189" alt="Screenshot 2023-06-22 at 22 50 57"
src="a70690ea-ebfc-48fe-af23-cdc33bcb2098">
Two small tweaks:
1. Vertically center arrow here when editing a PR:
<img width="405" alt="Screenshot 2023-06-20 at 19 48 49"
src="1d63764d-9fd9-467e-8a8e-9258c06475eb">
2. Use 2-row layout on diff viewed status and show it again on mobile:
<img width="142" alt="Screenshot 2023-06-20 at 19 51 21"
src="3046e782-163c-4f87-910c-a22066de8f1b">
Mobile view:
<img width="370" alt="Screenshot 2023-06-20 at 19 44 40"
src="9cf56347-7323-4d05-99a5-17ad215ee44d">
- Set
[type=search](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/input/search)
- Disable spellcheck
- Set maxLength 255 that I found in `templates/repo/issue/search.tmpl`
- Remove unnecessary `max-width`, it does nothing
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
- Improve "Hide the activity from the profile page" label
- E-Mail privacy icon in user profile now redirects to Privacy section
- E-Mail privacy settings moved to Privacy section
Previously, the user was redirected to the setting itself, however,
that is not a good design choice because the setting itself would
be at the very top of the user's browser window. This fix doesn't
fix the problem entirely, but it is definitely an improvement
compared to its previous iteration.
Numerous small UI fixes:
- Fix double border in collaborator list
- Fix system notice table background
- Mute links in repo and org lists
- Downsize projects edit buttons
- Improve milestones and project list rendering
- Condense milestone list entry to a single line of "metas"
- Mute ".." button in repo files list
If enabled show a clickable label in the comment. A click on the label
opens the Conversation tab with the comment focussed - there you're able
to view the old diff (or original diff the comment was created on).
**Screenshots**
When resolved and outdated:
Option to enable/disable this (stored in user settings - default is
disabled):
fixes#24913
---------
Co-authored-by: silverwind <me@silverwind.io>
In modern days, there is no reason to make users set "charset" anymore.
Close#25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
- The label text color on project board is not contrasting enough,
changed to colors that are same as places that also used
`useLightTextOnBackground` function
([util_render.go](2cdf260f42/modules/templates/util_render.go (L136-L141)),
[Context
Popup](2cdf260f42/web_src/js/components/ContextPopup.vue (L81-L84)))
- background of modal `content` is `#ffffff` (from fomantic) right now,
which does not look good on dark mode, so changed to `var(--color-body)`
Before:
<img width="1378" alt="Screen Shot 2023-06-21 at 14 24 13"
src="1527ca28-c884-4ca9-a4be-7a72ad1a093a">
<img width="900" alt="Screen Shot 2023-06-21 at 14 25 52"
src="fab82116-7376-4027-a0a4-9eedf9fb0a30">
After:
<img width="1383" alt="Screen Shot 2023-06-21 at 14 19 33"
src="fe0997e7-fee6-4522-bc4e-545088ec1cc8">
<img width="797" alt="Screen Shot 2023-06-21 at 14 32 42"
src="b0591af0-950c-4448-9430-34d6c7215971">
Commit with `echo "\nmessage after a blank line\nsecond line of the
message" | git commit --cleanup=verbatim -F -` and push.
<img width="1139" alt="image"
src="f9a2c28c-e307-4c78-9e31-3d3ace7b9274">
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
Part of #25042
1. Added actor and status dropdowns first in case something is offtrack
and PR is too large.
2. Also added "No results matched." and "The workflow has no runs yet.",
and "No results matched." will show if there is no filter results and
there is no workflows (with [reference to github
action](https://github.com/go-gitea/gitea/actions/workflows/files-changed.yml?query=actor%3AGiteaBot))
Demo:
6e76292c-4c1f-450d-8b48-99944cfc920c
TODOs:
- [x] Get available status (same as those in `aggregateJobStatus`)
instead of getting from database
- [x] Use `JOIN` to get actors, actors order by name
- [x] Make self on top
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix#25377, the "install" page needs more fine tunes.
Address
https://github.com/go-gitea/gitea/pull/25163#issuecomment-1599207916
Remove the unused "icon-button".
And fix the layout:
Without the dropdown icon:
```
{{svg "gitea-whitespace"}}
```
With the dropdown icon:
```
{{svg "gitea-whitespace" 16 "gt-mr-3"}}
{{svg "octicon-triangle-down" 14 "dropdown icon"}}
```
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
- Extract navbar CSS to own file
- Reduce height from 52px to 50px
- Give every item a hover effect of of 36px, including the logo and on
mobile
- Consistent horizontal padding of 10px left and right
<img width="549" alt="Screenshot 2023-06-18 at 13 41 16"
src="0b00d101-253e-4b1f-9ee2-322d60fb2e26">
<img width="98" alt="Screenshot 2023-06-18 at 14 03 43"
src="4ef5d98b-4d1e-45de-822e-c2c844e19876">
<img width="234" alt="Screenshot 2023-06-18 at 14 03 18"
src="a4d9b04b-83de-42aa-a9ce-f010a9690688">
<img width="873" alt="Screenshot 2023-06-18 at 13 58 28"
src="8cb8e31e-2adf-40c8-ae3f-d00d011b4d1b">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
The [docker/build-push-action@v2
action](https://github.com/docker/build-push-action) by default ignores
the checkout created using the actions/checkout@v2 action. When you pass
a git build context to docker build, it wouldn't include the .git
directory.
By passing `context: .` to the build step then it'll use the Actions git
context which includes the git fetch from the earlier step.
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
Fix#24846 applying the solution proposed by @silverwind
<details>
<summary>Screenshots</summary>
</details>
Replaces #25335
Fix regressions from https://github.com/go-gitea/gitea/pull/25219:
Math before and after:
<img width="630" alt="Screenshot 2023-06-18 at 16 00 52"
src="f2a01e4b-31ca-407c-8fc3-f0aec569b48e">
<img width="680" alt="Screenshot 2023-06-18 at 16 03 44"
src="faab8e39-f088-45ab-b460-15fc3654c99d">
Mermain before and after:
<img width="810" alt="Screenshot 2023-06-18 at 15 58 56"
src="d8c24e81-4702-4e17-b791-7dffe090c068">
<img width="786" alt="Screenshot 2023-06-18 at 15 58 37"
src="3a268e10-c071-410d-a66e-8c4427d1d61c">
`docker-dryrun` runs on almost any PR, which is a huge waste of CI
resources. Run it only when the Dockerfiles change and also add a step
that verifies the rootless file.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- Reduce `pyproject.toml` and `package.json` to the minimal required
format, removing unneeded properties. `build-system` is not needed as
per
[this](https://github.com/python-poetry/poetry/issues/8110#issuecomment-1595846841).
- Fix `poetry.toml` options they were wrong previously.
- Add dependencies of poetry files to templates `files-changed`.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
We only needs 2 lines to hide the dividers.
```
$dropdownLabelFilter.dropdown('setting', {'hideDividers': 'empty'});
$dropdownLabelFilter.dropdown('refreshItems');
```
Other code blocks are refactored by the way.
A regression of #25210
The `e.target` is not "this", eg: `<button link-action><svg></button>`,
then `this` should be `button` but `e.target` is `svg`.
I will propose a clearer and complete solution for these "link-action"
"show-modal" elements after #24724
Co-authored-by: Giteabot <teabot@gitea.io>
If the APP_DATA_PATH isn't written into the config when installing, then
its value is uncertain because some Gitea command doesn't run with
correct WorkPath.
This is a quick fix for #25330 and can be backported.
Various fixes to pages or elements which were looking ugly on mobile.
<details>
<summary>Screenshots</summary>
</details>
Co-authored by @silverwind
---------
Co-authored-by: silverwind <me@silverwind.io>
- Update all JS dependencies
- Enable stylint
[`media-feature-name-value-no-unknown`](https://stylelint.io/user-guide/rules/media-feature-name-value-no-unknown)
- Make use of new features in webpack and text-expander-element
- Tested Swagger and Mermaid
To explain the `text-expander-element` change: Before this version, the
element added a unavoidable space after emoji completion. Now that
https://github.com/github/text-expander-element/pull/36 is in, we gain
control over this space and I opted to remove it for emoji completion
and retain it for `@` mentions.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Save another 50KB of CSS by removing unused and useless Fomantic
variants.
Removed the last instance if a `tertiary` button and fixed a TODO:
<img width="509" alt="Screenshot 2023-06-15 at 22 34 36"
src="8a16ae7b-2b17-439b-a096-60a52724e3d6">
Follow #23290
Network error won't make content lost. And this is a much better
approach than "loading-button".
The UI is not perfect and there are still some TODOs, they can be done
in following PRs, not a must in this PR's scope.
<details>
</details>
This simply shows if a File has the executable Permission
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
With the recent release of https://github.com/loft-sh/devpod making
ephemeral dev environments (ala GitPod/Codespaces) much easier (aka, no
pre-configured infra required). This allows an alternative to using
GitPod for such development options.
---------
Co-authored-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
In this pull request, the following changes are addressed:
- State user should create `config.yaml` before start container to avoid
errors.
- Provided instructions to deploy runners using docker compose.
Fixes: https://github.com/go-gitea/gitea/issues/25282
Fix the problems:
1. The `repo-button-row` had various patches before, this PR makes it
consistent
2. The "Add File" has wrong CSS class "icon", remove it
3. The "Add File" padding was overridden by "!important", fix it by
`.repo-button-row .button.dropdown` with comment
4. The selector `.ui.segments ~ .ui.top.attached.header` is incorrect,
it should use `+`
So I found this [linter](https://github.com/Riverside-Healthcare/djlint)
which features a mode for go templates, so I gave it a try and it did
find a number of valid issue, like unbalanced tags etc. It also has a
number of bugs, I had to disable/workaround many issues.
Given that this linter is written in python, this does add a dependency
on `python` >= 3.8 and `poetry` to the development environment to be
able to run this linter locally.
- `e.g.` prefixes on placeholders are removed because the linter had a
false-positive on `placeholder="e.g. cn=Search"` for the `attr=value`
syntax and it's not ideal anyways to write `e.g.` into a placeholder
because a placeholder is meant to hold a sample value.
- In `templates/repo/settings/options.tmpl` I simplified the logic to
not conditionally create opening tags without closing tags because this
stuff confuses the linter (and possibly the reader as well).
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It causes not only one issue like #25221 (the footer width was also
affected by that change and was fixed some time ago)
The problem of "overflow: overlay" (#21850) is:
* It's not widely supported and is non-standard
https://caniuse.com/css-overflow-overlay
* It's not widely tested in Gitea (some standard layout like `ui
container + ui grid` may break it).
* The benefit seems smaller than the problems it brings.
So, I think it is good to revert it.
----
Let's leave enough time for testing and reviewing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
close#24540
related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/9
- Runner side: https://gitea.com/gitea/act_runner/pulls/201
changes:
- Add column of `labels` to table `action_runner`, and combine the value
of `agent_labels` and `custom_labels` column to `labels` column.
- Store `labels` when registering `act_runner`.
- Update `labels` when `act_runner` starting and calling `Declare`.
- Users cannot modify the `custom labels` in edit page any more.
other changes:
- Store `version` when registering `act_runner`.
- If runner is latest version, parse version from `Declare`. But older
version runner still parse version from request header.
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
The plan is that all built-in auth providers use inline SVG for more
flexibility in styling and to get the GitHub icon to follow
`currentcolor`. This only removes the `public/img/auth` directory and
adds the missing svgs to our svg build.
It should map the built-in providers to these SVGs and render them. If
the user has set a Icon URL, it should render that as an `img` tag
instead.
```
gitea-azure-ad
gitea-bitbucket
gitea-discord
gitea-dropbox
gitea-facebook
gitea-gitea
gitea-gitlab
gitea-google
gitea-mastodon
gitea-microsoftonline
gitea-nextcloud
gitea-twitter
gitea-yandex
octicon-mark-github
```
GitHub logo is now white again on dark theme:
<img width="431" alt="Screenshot 2023-06-12 at 21 45 34"
src="27a43504-d60a-4132-a502-336b25883e4d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/25094
`GetBlobContent` will only get the first 1024 bytes, if the README.md
size is larger than 1024 bytes,
We can not render the rest of them.
After this fix, we should provide the limited size to read when call
`GetBlobContent`.
After:
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The current UI to create API access tokens uses checkboxes that have a
complicated relationship where some need to be checked and/or disabled
in certain states. It also requires that a user interact with it to
understand what their options really are.
This branch changes to use `<select>`s. It better fits the available
options, and it's closer to [GitHub's
UI](https://github.com/settings/personal-access-tokens/new), which is
good, in my opinion. It's more mobile friendly since the tap-areas are
larger. If we ever add more permissions, like Maintainer, there's a
natural place that doesn't take up more screen real-estate.
This branch also fixes a few minor issues:
- Hide the error about selecting at least one permission after second
submission
- Fix help description to call it "authorization" since that's what
permissions are about (not authentication)
Related: #24767.
<img width="883" alt="Screenshot 2023-06-07 at 5 07 34 PM"
src="6b63d807-c9be-4a4b-8e53-ecab6cbb8f76">
---
When it's open:
<img width="881" alt="Screenshot 2023-06-07 at 5 07 59 PM"
src="2432c6d0-39c2-4ca4-820e-c878ffdbfb69">
Fixes#25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
According to my test, the UI (emoji) is fine in Safari
And actually the code is just dead code, because the "resize" event is
never fired on page loading. So for most cases users just view the pages
without this hacky patch, nobody ever complains.
An error occurs when clicking on `show full screen` on action page.
<img width="1440" alt="Screen Shot 2023-06-12 at 13 06 52"
src="1d4ded3c-fb77-4dd8-9201-24d0696f96eb">
class name has changed in #25134, so the selector is not working.
Enhance the selectors to fix this.
Main changes:
- Moved the icon into `action-item-main`, and make it `position:
absolute` to allow add margin it to align with `issue-item-top-row`.
- Adjusted padding and color of texts.
# Before
<img width="721" alt="Screen Shot 2023-06-09 at 17 04 38"
src="3fc00e94-bcd4-4e06-b1d8-93be0576dbc3">
# After
<img width="1421" alt="Screen Shot 2023-06-09 at 18 32 47"
src="c2a0f9df-cac4-4197-9cbd-6c16dfef215b">
On hover:
<img width="1431" alt="Screen Shot 2023-06-09 at 18 32 54"
src="d0ab6fde-9722-4d76-831b-163fd6a1f560">
Enable deduplication of unofficial reviews. When pull requests are
configured to include all approvers, not just official ones, in the
default merge messages it was possible to generate duplicated
Reviewed-by lines for a single person. Add an option to find only
distinct reviews for a given query.
fixes#24795
---------
Signed-off-by: Cory Todd <cory.todd@canonical.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25133
Thanks @wxiaoguang @silverwind.
I'm sorry I made a mistake, it will be fixed in this PR.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
- Fix and improve mobile navbar layout
- Apply all cleanups suggested in
https://github.com/go-gitea/gitea/pull/25111
- Make media query breakpoints match Fomantic's exactly
- Clean up whitespace in class on navbar items
Mobile navbar before and after:
<img width="745" alt="Screenshot 2023-06-08 at 08 40 56"
src="ca84b239-b10f-41db-8c06-dcf2b6dd9d28">
<img width="739" alt="Screenshot 2023-06-08 at 08 41 23"
src="09133c54-eb7e-4110-858c-ead23c3b7521">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Various corrections to button styles, especially secondary
- Remove focus highlight, it's annoying when it stays on button after
press
- Clearly define ghost and link buttons with demos in devtest
- Remove black, grey and tertiary buttons, they should not be used
- Make `arc-green` slightly darker
<img width="1226" alt="image"
src="8d89786a-01ab-40f8-ae5a-e17f40e35084">
<img width="1249" alt="image"
src="83651e6d-3c27-46ff-b8bd-ff344d70e949">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
The `setup-go` actions did not all have `check-latest` which means they
use some cached version of go that currently still resolves to go1.20.4,
as seen in a number of recent runs that currently fail at govulncheck
because of it:
````
Run actions/setup-go@v4
Setup go version spec >=1.20
Attempting to resolve the latest version from the manifest...
matching >=1.20...
Resolved as '1.20.4'
````
Add the
[check-latest](https://github.com/actions/setup-go#check-latest-version)
option which should guarantee that this cache is skipped.
Close#24808
Co-Authour @wxiaoguang @silverwind
1. Most svgs are found from https://worldvectorlogo.com/ , and some are
from conversion of png to svg. (facebook and nextcloud). And also
changed `templates/user/settings/security/accountlinks.tmpl`.
2. Fixed display name and iconurl related logic
# After
<img width="1436" alt="Screen Shot 2023-06-05 at 14 09 05"
src="a5db39d8-1ab0-4676-82a4-fba60a1d1f84">
On mobile
<img width="378" alt="Screen Shot 2023-06-05 at 14 09 46"
src="71d0f51b-baac-4f48-8ca2-ae0e013bd62e">
user/settings/security/accountlinks (The dropdown might be improved
later)
<img width="973" alt="Screen Shot 2023-06-01 at 10 01 44"
src="27010e7e-2785-4fc5-8c49-b06621898f37">
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
If redirect_to parameter has set value starting with `\\example.com`
redirect will be created with header `Location: /\\example.com` that
will redirect to example.com domain.
Extract from #22743
`DeleteBranch` will trigger a push update event, so that
`pull_service.CloseBranchPulls` has been invoked twice and
`AddDeletedBranch` is better to be moved to push update then even user
delete a branch via git command, it will also be triggered.
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes https://github.com/go-gitea/gitea/issues/25130
The old code uses `$(this).next()` to get `dismiss-review-modal`.
At first, it will get `$(#dismiss-review-modal)`, but the next time it
will get `$(#dismiss-review-modal).next();`
and then `$(#dismiss-review-modal).next().next();`.
Because div `dismiss-review-modal` will be removed when
`dismiss-review-btn` clicked.
Maybe the right usage is adding `show-modal` class and `data-modal`
attribute.
That ID is a "copy&paste" error, it conflicts with the
`initRepoMigrationStatusChecker` logic, which is the right function for
a real `#repo_migrating` element. That wrong ID causes incorrect page
navigation after installation.
Improvements to the notification icon and `<nav>`:
- Add a opaque color for header hover and use it, allowing the border to
be the right color on hover (sadly, not otherwise possible with CSS, not
even `color-mix`).
- Increase font size by 1px
- Use flexbox for slightly better text centering
- Reduce padding of user and add repo button, add margin on right side
of user menu
- Remove the `following bar` wrapper on navbar
<img width="176" alt="Screenshot 2023-06-07 at 00 07 08"
src="23cdc3d6-7f63-49df-bec3-f2e75e32a304">
<img width="63" alt="Screenshot 2023-06-07 at 00 07 14"
src="fae602c2-4467-4d50-b1ec-56317843f9a2">
<img width="84" alt="Screenshot 2023-06-07 at 00 07 36"
src="c48141b8-0b3c-48cc-846a-3a272524dbdb">
<img width="329" alt="Screenshot 2023-06-07 at 00 25 10"
src="cda612f1-426e-466b-a351-fc992bfd18fd">
<img width="186" alt="Screenshot 2023-06-07 at 00 35 45"
src="04484a2e-9bbf-493c-aa26-8e936da008fa">
<img width="797" alt="Screenshot 2023-06-07 at 16 57 40"
src="e7ccb672-5807-4cb6-b306-b18ae0c7e321">
2023-06-07 22:21:57 +00:00
5725 changed files with 283121 additions and 251606 deletions
In addition, if your problem relates to git commands set `RUN_MODE=dev` at the top of app.ini
- type:textarea
id:description
attributes:
label:Description
description:|
Please provide a description of your issue here, with a URL if you were able to reproduce the issue (see below)
If you are using a proxy or a CDN (e.g. Cloudflare) in front of Gitea, please disable the proxy/CDN fully and access Gitea directly to confirm the issue still persists without those services.
- type:input
id:gitea-ver
attributes:
label:Gitea Version
description:Gitea version (or commit reference) of your instance
validations:
required:true
- type:dropdown
id:can-reproduce
attributes:
label:Can you reproduce the bug on the Gitea demo site?
description:|
If so, please provide a URL in the Description field
In addition, if your problem relates to git commands set `RUN_MODE=dev` at the top of app.ini
- type:input
id:logs
attributes:
label:Log Gist
description:Please provide a gist URL of your logs, with any sensitive information (e.g. API keys) removed/hidden
- type:textarea
id:screenshots
attributes:
label:Screenshots
description:If this issue involves the Web Interface, please provide one or more screenshots
- type:input
id:git-ver
attributes:
label:Git Version
description:The version of git running on the server
- type:input
id:os-ver
attributes:
label:Operating System
description:The operating system you are using to run Gitea
- type:textarea
id:run-info
attributes:
label:How are you running Gitea?
description:|
Please include information on whether you built Gitea yourself, used one of our downloads, are using https://try.gitea.io or are using some other package
Please also tell us how you are running Gitea, e.g. if it is being run from docker, a command-line, systemd etc.
If you are using a package or systemd tell us what distribution you are using
validations:
required:true
- type:dropdown
id:database
attributes:
label:Database
description:What database system are you running?
options:
- PostgreSQL
- MySQL
- MSSQL
- SQLite
- type:markdown
attributes:
value:|
NOTE:If your issue is a security concern, please send an email to security@gitea.io instead of opening a public issue.
- type:markdown
attributes:
value:|
1. Please speak English, this is the language all maintainers can speak and write.
2. Please ask questions or configuration/deploy problems on our Discord
server (https://discord.gg/gitea) or forum (https://forum.gitea.com).
3. Make sure you are using the latest release and
take a moment to check that your issue hasn't been reported before.
4. Make sure it's not mentioned in the FAQ (https://docs.gitea.com/help/faq)
5. It's really important to provide pertinent details and logs (https://docs.gitea.com/help/support),
incomplete details will be handled as an invalid report.
- type:textarea
id:description
attributes:
label:Description
description:|
Please provide a description of your issue here, with a URL if you were able to reproduce the issue (see below)
If you are using a proxy or a CDN (e.g. Cloudflare) in front of Gitea, please disable the proxy/CDN fully and access Gitea directly to confirm the issue still persists without those services.
- type:input
id:gitea-ver
attributes:
label:Gitea Version
description:Gitea version (or commit reference) of your instance
validations:
required:true
- type:dropdown
id:can-reproduce
attributes:
label:Can you reproduce the bug on the Gitea demo site?
description:|
If so, please provide a URL in the Description field
In addition, if your problem relates to git commands set `RUN_MODE=dev` at the top of app.ini
- type:input
id:logs
attributes:
label:Log Gist
description:Please provide a gist URL of your logs, with any sensitive information (e.g. API keys) removed/hidden
- type:textarea
id:screenshots
attributes:
label:Screenshots
description:If this issue involves the Web Interface, please provide one or more screenshots
- type:input
id:git-ver
attributes:
label:Git Version
description:The version of git running on the server
- type:input
id:os-ver
attributes:
label:Operating System
description:The operating system you are using to run Gitea
- type:textarea
id:run-info
attributes:
label:How are you running Gitea?
description:|
Please include information on whether you built Gitea yourself, used one of our downloads, are using https://demo.gitea.com or are using some other package
Please also tell us how you are running Gitea, e.g. if it is being run from docker, a command-line, systemd etc.
If you are using a package or systemd tell us what distribution you are using
description:Something doesn't look quite as it should? Report it here!
labels:["kind/bug","kind/ui"]
labels:["type/bug","topic/ui"]
body:
- type:markdown
attributes:
value:|
NOTE:If your issue is a security concern, please send an email to security@gitea.io instead of opening a public issue.
- type:markdown
attributes:
value:|
1. Please speak English, this is the language all maintainers can speak and write.
2. Please ask questions or configuration/deploy problems on our Discord
server (https://discord.gg/gitea) or forum (https://discourse.gitea.io).
3. Please take a moment to check that your issue doesn't already exist.
4. Make sure it's not mentioned in the FAQ (https://docs.gitea.io/en-us/faq)
5. Please give all relevant information below for bug reports, because
incomplete details will be handled as an invalid report.
6. In particular it's really important to provide pertinent logs. If you are certain that this is a javascript
error, show us the javascript console. If the error appears to relate to Gitea the server you must also give us
DEBUG level logs. (See https://docs.gitea.io/en-us/logging-configuration/#debugging-problems)
- type:textarea
id:description
attributes:
label:Description
description:|
Please provide a description of your issue here, with a URL if you were able to reproduce the issue (see below)
If using a proxy or a CDN (e.g. CloudFlare) in front of gitea, please disable the proxy/CDN fully and connect to gitea directly to confirm the issue still persists without those services.
- type:textarea
id:screenshots
attributes:
label:Screenshots
description:Please provide at least 1 screenshot showing the issue.
validations:
required:true
- type:input
id:gitea-ver
attributes:
label:Gitea Version
description:Gitea version (or commit reference) your instance is running
validations:
required:true
- type:dropdown
id:can-reproduce
attributes:
label:Can you reproduce the bug on the Gitea demo site?
description:|
If so, please provide a URL in the Description field
URL of Gitea demo:https://try.gitea.io
options:
- "Yes"
- "No"
validations:
required:true
- type:input
id:os-ver
attributes:
label:Operating System
description:The operating system you are using to access Gitea
- type:input
id:browser-ver
attributes:
label:Browser Version
description:The browser and version that you are using to access Gitea
validations:
required:true
- type:markdown
attributes:
value:|
NOTE:If your issue is a security concern, please send an email to security@gitea.io instead of opening a public issue.
- type:markdown
attributes:
value:|
1. Please speak English, this is the language all maintainers can speak and write.
2. Please ask questions or configuration/deploy problems on our Discord
server (https://discord.gg/gitea) or forum (https://forum.gitea.com).
3. Please take a moment to check that your issue doesn't already exist.
4. Make sure it's not mentioned in the FAQ (https://docs.gitea.com/help/faq)
5. Please give all relevant information below for bug reports, because
incomplete details will be handled as an invalid report.
6. In particular it's really important to provide pertinent logs. If you are certain that this is a javascript
error, show us the javascript console. If the error appears to relate to Gitea the server you must also give us
DEBUG level logs. (See https://docs.gitea.com/administration/logging-config#collecting-logs-for-help)
- type:textarea
id:description
attributes:
label:Description
description:|
Please provide a description of your issue here, with a URL if you were able to reproduce the issue (see below)
If using a proxy or a CDN (e.g. CloudFlare) in front of gitea, please disable the proxy/CDN fully and connect to gitea directly to confirm the issue still persists without those services.
- type:textarea
id:screenshots
attributes:
label:Screenshots
description:Please provide at least 1 screenshot showing the issue.
validations:
required:true
- type:input
id:gitea-ver
attributes:
label:Gitea Version
description:Gitea version (or commit reference) your instance is running
validations:
required:true
- type:dropdown
id:can-reproduce
attributes:
label:Can you reproduce the bug on the Gitea demo site?
description:|
If so, please provide a URL in the Description field
URL of Gitea demo:https://demo.gitea.com
options:
- "Yes"
- "No"
validations:
required:true
- type:input
id:os-ver
attributes:
label:Operating System
description:The operating system you are using to access Gitea
- type:input
id:browser-ver
attributes:
label:Browser Version
description:The browser and version that you are using to access Gitea
1. Make sure you are targeting the `main` branch, pull requests on release branches are only allowed for backports.
2. Make sure you have read contributing guidelines: https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md .
3. Describe what your pull request does and which issue you're targeting (if any).
4. It is recommended to enable "Allow edits by maintainers", so maintainers can help more easily.
5. Your input here will be included in the commit message when this PR has been merged. If you don't want some content to be included, please separate them with a line like `---`.
6. Delete all these tips before posting.
3. For documentations contribution, please go to https://gitea.com/gitea/docs
4. Describe what your pull request does and which issue you're targeting (if any).
5. It is recommended to enable "Allow edits by maintainers", so maintainers can help more easily.
6. Your input here will be included in the commit message when this PR has been merged. If you don't want some content to be included, please separate them with a line like `---`.
This document explains how to contribute changes to the Gitea project. \
It assumes you have followed the [installation instructions](https://docs.gitea.io/en-us/). \
It assumes you have followed the [installation instructions](https://docs.gitea.com/category/installation). \
Sensitive security-related issues should be reported to [security@gitea.io](mailto:security@gitea.io).
For configuring IDEs for Gitea development, see the [contributed IDE configurations](contrib/ide/).
@ -75,7 +77,7 @@ If your issue has not been reported yet, [open an issue](https://github.com/go-g
and answer the questions so we can understand and reproduce the problematic behavior. \
Please write clear and concise instructions so that we can reproduce the behavior — even if it seems obvious. \
The more detailed and specific you are, the faster we can fix the issue. \
It is really helpful if you can reproduce your problem on a site running on the latest commits, i.e. <https://try.gitea.io>, as perhaps your problem has already been fixed on a current version. \
It is really helpful if you can reproduce your problem on a site running on the latest commits, i.e. <https://demo.gitea.com>, as perhaps your problem has already been fixed on a current version. \
Please follow the guidelines described in [How to Report Bugs Effectively](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html) for your report.
Please be kind, remember that Gitea comes at no cost to you, and you're getting free help.
@ -102,6 +104,13 @@ the goals for the project and tools.
Pull requests should not be the place for architecture discussions.
### Issue locking
Commenting on closed or merged issues/PRs is strongly discouraged.
Such comments will likely be overlooked as some maintainers may not view notifications on closed issues, thinking that the item is resolved.
As such, commenting on closed/merged issues/PRs may be disabled prior to the scheduled auto-locking if a discussion starts or if unrelated comments are posted.
If further discussion is needed, we encourage you to open a new issue instead and we recommend linking to the issue/PR in question for context.
## Building Gitea
See the [development setup instructions](https://docs.gitea.com/development/hacking-on-gitea).
@ -110,7 +119,7 @@ See the [development setup instructions](https://docs.gitea.com/development/hack
### Backend
Go dependencies are managed using [Go Modules](https://golang.org/cmd/go/#hdr-Module_maintenance). \
Go dependencies are managed using [Go Modules](https://go.dev/cmd/go/#hdr-Module_maintenance). \
You can find more details in the [go mod documentation](https://go.dev/ref/mod) and the [Go Modules Wiki](https://github.com/golang/go/wiki/Modules).
Pull requests should only modify `go.mod` and `go.sum` where it is related to your change, be it a bugfix or a new feature. \
@ -167,14 +176,14 @@ Here's how to run the test suite:
|``make test[\#SpecificTestName]`` | run unit test(s) |
|``make test[\#SpecificTestName]`` | run unit test(s) | |
|``make test-sqlite[\#SpecificTestName]``| run [integration](tests/integration) test(s) for SQLite |[More details](tests/integration/README.md) |
|``make test-e2e-sqlite[\#SpecificTestName]``| run [end-to-end](tests/e2e) test(s) for SQLite |[More details](tests/e2e/README.md) |
## Translation
All translation work happens on [Crowdin](https://crowdin.com/project/gitea).
The only translation that is maintained in this repository is [the English translation](https://github.com/go-gitea/gitea/blob/master/options/locale/locale_en-US.ini).
All translation work happens on [Crowdin](https://translate.gitea.com).
The only translation that is maintained in this repository is [the English translation](https://github.com/go-gitea/gitea/blob/main/options/locale/locale_en-US.ini).
It is synced regularly with Crowdin. \
Other locales on main branch **should not** be updated manually as they will be overwritten with each sync. \
Once a language has reached a **satisfactory percentage** of translated keys (~25%), it will be synced back into this repo and included in the next released version.
@ -203,10 +212,20 @@ Some of the key points:
In the PR title, describe the problem you are fixing, not how you are fixing it. \
Use the first comment as a summary of your PR. \
In the PR summary, you can describe exactly how you are fixing this problem. \
In the PR summary, you can describe exactly how you are fixing this problem.
Keep this summary up-to-date as the PR evolves. \
If your PR changes the UI, you must add **after** screenshots in the PR summary. \
If you are not implementing a new feature, you should also post **before** screenshots for comparison. \
If you are not implementing a new feature, you should also post **before** screenshots for comparison.
If you are implementing a new feature, your PR will only be merged if your screenshots are up to date.\
Furthermore, feature PRs will only be merged if their summary contains a clear usage description (understandable for users) and testing description (understandable for reviewers).
You should strive to combine both into a single description.
Another requirement for merging PRs is that the PR is labeled correctly.\
However, this is not your job as a contributor, but the job of the person merging your PR.\
If you think that your PR was labeled incorrectly, or notice that it was merged without labels, please let us know.
If your PR closes some issues, you must note that in a way that both GitHub and Gitea understand, i.e. by appending a paragraph like
```text
@ -225,17 +244,20 @@ PRs without a milestone may not be merged.
### Labels
Every PR should be labeled correctly with every label that applies. \
This includes especially the distinction between `bug` (fixing existing functionality), `feature` (new functionality), `enhancement` (upgrades for existing functionality), and `refactoring` (improving the internal code structure without changing the output (much)). \
Furthermore,
Almost all labels used inside Gitea can be classified as one of the following:
- `modifies/…`: Determines which parts of the codebase are affected. These labels will be set through the CI.
- `topic/…`: Determines the conceptual component of Gitea that is affected, i.e. issues, projects, or authentication. At best, PRs should only target one component but there might be overlap. Must be set manually.
- `type/…`: Determines the type of an issue or PR (feature, refactoring, docs, bug, …). If GitHub supported scoped labels, these labels would be exclusive, so you should set **exactly** one, not more or less (every PR should fall into one of the provided categories, and only one).
- `issue/…` / `pr/…`: Labels that are specific to issues or PRs respectively and that are only necessary in a given context, i.e. `issue/not-a-bug` or `pr/need-2-approvals`
Every PR should be labeled correctly with every label that applies.
There are also some labels that will be managed automatically.\
In particular, these are
- the amount of pending required approvals
- whether this PR is `blocked`, a `backport` or `breaking`
- if it targets the `ui` or `api`
- if it increases the application `speed`
- reduces `memory usage`
are oftentimes notable labels.
- has all `backport`s or needs a manual backport
### Breaking PRs
@ -252,13 +274,16 @@ Changing the default value of a setting or replacing the setting with another on
#### How to handle breaking PRs?
If your PR has a breaking change, you must add a `BREAKING` section to your PR summary, e.g.
If your PR has a breaking change, you must add two things to the summary of your PR:
```
1. A reasoning why this breaking change is necessary
2. A `BREAKING` section explaining in simple terms (understandable for a typical user) how this PR affects users and how to mitigate these changes. This section can look for example like
```md
## :warning: BREAKING :warning:
```
To explain how this will affect users and how to mitigate these changes.
Breaking PRs will not be merged as long as not both of these requirements are met.
### Maintaining open PRs
@ -333,13 +358,14 @@ $REWRITTEN_PR_SUMMARY
## Documentation
If you add a new feature or change an existing aspect of Gitea, the documentation for that feature must be created or updated in the same PR.
If you add a new feature or change an existing aspect of Gitea, the documentation for that feature must be created or updated in another PR at [https://gitea.com/gitea/docs](https://gitea.com/gitea/docs).
**The docs directory on main repository will be removed at some time. We will have a yaml file to store configuration file's meta data. After that completed, configuration documentation should be in the main repository.**
## API v1
The API is documented by [swagger](http://try.gitea.io/api/swagger) and is based on [the GitHub API](https://docs.github.com/en/rest).
The API is documented by [swagger](https://gitea.com/api/swagger) and is based on [the GitHub API](https://docs.github.com/en/rest).
### GitHub API compatability
### GitHub API compatibility
Gitea's API should use the same endpoints and fields as the GitHub API as far as possible, unless there are good reasons to deviate. \
If Gitea provides functionality that GitHub does not, a new endpoint can be created. \
@ -439,7 +465,7 @@ We assume in good faith that the information you provide is legally binding.
We adopted a release schedule to streamline the process of working on, finishing, and issuing releases. \
The overall goal is to make a major release every three or four months, which breaks down into two or three months of general development followed by one month of testing and polishing known as the release freeze. \
All the feature pull requests should be
merged before feature freeze. And, during the frozen period, a corresponding
merged before feature freeze. All feature pull requests haven't been merged before this feature freeze will be moved to next milestone, please notice our feature freeze announcement on discord. And, during the frozen period, a corresponding
release branch is open for fixes backported from main branch. Release candidates
are made during this period for user testing to
obtain a final version that is maintained in this branch.
@ -470,36 +496,53 @@ if possible provide GPG signed commits.
At the start of 2023, the `Owners` team was dissolved. Instead, the governance charter proposed a technical oversight committee (TOC) which expands the ownership team of the Gitea project from three elected positions to six positions. Three positions would be elected as it has been over the past years, and the other three would consist of appointed members from the Gitea company.
At the start of 2023, the `Owners` team was dissolved. Instead, the governance charter proposed a technical oversight committee (TOC) which expands the ownership team of the Gitea project from three elected positions to six positions. Three positions are elected as it has been over the past years, and the other three consist of appointed members from the Gitea company.
https://blog.gitea.com/quarterly-23q1/
When the new community members have been elected, the old members will give up ownership to the newly elected members. For security reasons, TOC members or any account with write access (like a bot) must use 2FA.
Any maintainer is eligible to be part of the community TOC if they are not associated with the Gitea company.
A maintainer can either nominate themselves, or can be nominated by other maintainers to be a candidate for the TOC election.
If you are nominated by someone else, you must first accept your nomination before the vote starts to be a candidate.
The TOC is elected for one year, the TOC election happens yearly.
After the announcement of the results of the TOC election, elected members have two weeks time to confirm or refuse the seat.
If an elected member does not answer within this timeframe, they are automatically assumed to refuse the seat.
Refusals result in the person with the next highest vote getting the same choice.
As long as seats are empty in the TOC, members of the previous TOC can fill them until an elected member accepts the seat.
If an elected member that accepts the seat does not have 2FA configured yet, they will be temporarily counted as `answer pending` until they manage to configure 2FA, thus leaving their seat empty for this duration.
@ -557,7 +600,7 @@ be reviewed by two maintainers and must pass the automatic tests.
- And then push the tag as `git push origin v$vmaj.$vmin.$`. Drone CI will automatically create a release and upload all the compiled binary. (But currently it doesn't add the release notes automatically. Maybe we should fix that.)
- If needed send a frontport PR for the changelog to branch `main` and update the version in `docs/config.yaml` to refer to the new version.
- Send PR to [blog repository](https://gitea.com/gitea/blog) announcing the release.
- Verify all release assets were correctly published through CI on dl.gitea.io and GitHub releases. Once ACKed:
- bump the version of https://dl.gitea.io/gitea/version.json
- Verify all release assets were correctly published through CI on dl.gitea.com and GitHub releases. Once ACKed:
- bump the version of https://dl.gitea.com/gitea/version.json
- merge the blog post PR
- announce the release in discord `#announcements`
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
[](https://www.codetriage.com/go-gitea/gitea "Help Contribute to Open Source")
[](https://opencollective.com/gitea "Become a backer/sponsor of gitea")
[](https://gitpod.io/#https://github.com/go-gitea/gitea)
@ -62,11 +21,24 @@ painless way of setting up a self-hosted Git service.
As Gitea is written in Go, it works across **all** the platforms and
architectures that are supported by Go, including Linux, macOS, and
Windows on x86, amd64, ARM and PowerPC architectures.
You can try it out using [the online demo](https://try.gitea.io/).
This project has been
[forked](https://blog.gitea.io/2016/12/welcome-to-gitea/) from
[forked](https://blog.gitea.com/welcome-to-gitea/) from
[Gogs](https://gogs.io) since November of 2016, but a lot has changed.
For online demonstrations, you can visit [demo.gitea.com](https://demo.gitea.com).
For accessing free Gitea service (with a limited number of repositories), you can visit [gitea.com](https://gitea.com/user/login).
To quickly deploy your own dedicated Gitea instance on Gitea Cloud, you can start a free trial at [cloud.gitea.com](https://cloud.gitea.com).
## Documentation
You can find comprehensive documentation on our official [documentation website](https://docs.gitea.com/).
It includes installation, administration, usage, development, contributing guides, and more to help you get started and explore all features effectively.
If you have any suggestions or would like to contribute to it, you can visit the [documentation repository](https://gitea.com/gitea/docs)
## Building
From the root of the source tree, run:
@ -79,51 +51,52 @@ or if SQLite support is required:
The `build` target is split into two sub-targets:
- `make backend` which requires [Go Stable](https://go.dev/dl/), required version is defined in [go.mod](/go.mod).
- `make frontend` which requires [Node.js LTS](https://nodejs.org/en/download/) or greater and Internet connectivity to download npm dependencies.
- `make backend` which requires [Go Stable](https://go.dev/dl/), the required version is defined in [go.mod](/go.mod).
- `make frontend` which requires [Node.js LTS](https://nodejs.org/en/download/) or greater.
When building from the official source tarballs which include pre-built frontend files, the `frontend` target will not be triggered, making it possible to build without Node.js and Internet connectivity.
Internet connectivity is required to download the go and npm modules. When building from the official source tarballs which include pre-built frontend files, the `frontend` target will not be triggered, making it possible to build without Node.js.
Parallelism (`make -j <num>`) is not supported.
More info: https://docs.gitea.io/en-us/install-from-source/
More info: https://docs.gitea.com/installation/install-from-source
## Using
After building, a binary file named `gitea` will be generated in the root of the source tree by default. To run it, use:
./gitea web
NOTE: If you're interested in using our APIs, we have experimental
support with [documentation](https://try.gitea.io/api/swagger).
> [!NOTE]
> If you're interested in using our APIs, we have experimental support with [documentation](https://docs.gitea.com/api).
1. **YOU MUST READ THE [CONTRIBUTORS GUIDE](CONTRIBUTING.md) BEFORE STARTING TO WORK ON A PULL REQUEST.**
2. If you have found a vulnerability in the project, please write privately to **security@gitea.io**. Thanks!
> [!NOTE]
>
> 1. **YOU MUST READ THE [CONTRIBUTORS GUIDE](CONTRIBUTING.md) BEFORE STARTING TO WORK ON A PULL REQUEST.**
> 2. If you have found a vulnerability in the project, please write privately to **security@gitea.io**. Thanks!
## Translating
Translations are done through Crowdin. If you want to translate to a new language ask one of the managers in the Crowdin project to add a new language there.
Translations are done through [Crowdin](https://translate.gitea.com). If you want to translate to a new language ask one of the managers in the Crowdin project to add a new language there.
You can also just create an issue for adding a language or ask on discord on the #translation channel. If you need context or find some translation issues, you can leave a comment on the string or ask on Discord. For general translation questions there is a section in the docs. Currently a bit empty but we hope to fill it as questions pop up.
We provide an official [go-sdk](https://gitea.com/gitea/go-sdk), a CLI tool called [tea](https://gitea.com/gitea/tea) and an [action runner](https://gitea.com/gitea/act_runner) for Gitea Action.
For more information and instructions about how to install Gitea, please look at our [documentation](https://docs.gitea.io/en-us/).
If you have questions that are not covered by the documentation, you can get in contact with us on our [Discord server](https://discord.gg/Gitea) or create a post in the [discourse forum](https://discourse.gitea.io/).
We maintain a list of Gitea-related projects at [gitea/awesome-gitea](https://gitea.com/gitea/awesome-gitea), where you can discover more third-party projects, including SDKs, plugins, themes, and more.
We maintain a list of Gitea-related projects at [gitea/awesome-gitea](https://gitea.com/gitea/awesome-gitea).
## Communication
The Hugo-based documentation theme is hosted at [gitea/theme](https://gitea.com/gitea/theme).
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
The official Gitea CLI is developed at [gitea/tea](https://gitea.com/gitea/tea).
If you have questions that are not covered by the [documentation](https://docs.gitea.com/), you can get in contact with us on our [Discord server](https://discord.gg/Gitea) or create a post in the [discourse forum](https://forum.gitea.com/).
## Authors
@ -151,7 +124,6 @@ Support this project by becoming a sponsor. Your logo will show up here with a l
@ -163,18 +135,79 @@ Gitea is pronounced [/ɡɪ’ti:/](https://youtu.be/EM71-2uDAoY) as in "gi-tea"
We're [working on it](https://github.com/go-gitea/gitea/issues/1029).
**Where can I find the security patches?**
In the [release log](https://github.com/go-gitea/gitea/releases) or the [change log](https://github.com/go-gitea/gitea/blob/main/CHANGELOG.md), search for the keyword `SECURITY` to find the security patches.
## License
This project is licensed under the MIT License.
See the [LICENSE](https://github.com/go-gitea/gitea/blob/main/LICENSE) file
for the full license text.
## Screenshots
## Further information
Looking for an overview of the interface? Check it out!
<details>
<summary>Looking for an overview of the interface? Check it out!</summary>
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
[](https://www.codetriage.com/go-gitea/gitea "Help Contribute to Open Source")
[](https://opencollective.com/gitea "Become a backer/sponsor of gitea")
[](https://gitpod.io/#https://github.com/go-gitea/gitea)
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
[](https://www.codetriage.com/go-gitea/gitea "Help Contribute to Open Source")
[](https://opencollective.com/gitea "Become a backer/sponsor of gitea")
[](https://gitpod.io/#https://github.com/go-gitea/gitea)
[](https://discord.gg/Gitea "Join the Discord chat at https://discord.gg/Gitea")
<ahref="README.md">View this document in English</a>
</p>
## 目标
Gitea 的首要目标是创建一个极易安装，运行非常快速，安装和使用体验良好的自建 Git 服务。我们采用 Go 作为后端语言，这使我们只要生成一个可执行程序即可。并且他还支持跨平台，支持 Linux, macOS 和 Windows 以及各种架构，除了 x86，amd64，还包括 ARM 和 PowerPC。
// CmdAdmin represents the available admin sub-command.
CmdAdmin=cli.Command{
CmdAdmin=&cli.Command{
Name:"admin",
Usage:"Command line interface to perform common administrative operations",
Subcommands:[]cli.Command{
Usage:"Perform common administrative operations",
Commands:[]*cli.Command{
subcmdUser,
subcmdRepoSyncReleases,
subcmdRegenerate,
@ -43,314 +32,81 @@ var (
},
}
subcmdRepoSyncReleases=cli.Command{
subcmdRepoSyncReleases=&cli.Command{
Name:"repo-sync-releases",
Usage:"Synchronize repository releases with tags",
Action:runRepoSyncReleases,
}
subcmdRegenerate=cli.Command{
subcmdRegenerate=&cli.Command{
Name:"regenerate",
Usage:"Regenerate specific files",
Subcommands:[]cli.Command{
Commands:[]*cli.Command{
microcmdRegenHooks,
microcmdRegenKeys,
},
}
microcmdRegenHooks=cli.Command{
Name:"hooks",
Usage:"Regenerate git-hooks",
Action:runRegenerateHooks,
}
microcmdRegenKeys=cli.Command{
Name:"keys",
Usage:"Regenerate authorized_keys file",
Action:runRegenerateKeys,
}
subcmdAuth=cli.Command{
subcmdAuth=&cli.Command{
Name:"auth",
Usage:"Modify external auth providers",
Subcommands:[]cli.Command{
microcmdAuthAddOauth,
microcmdAuthUpdateOauth,
cmdAuthAddLdapBindDn,
cmdAuthUpdateLdapBindDn,
cmdAuthAddLdapSimpleAuth,
cmdAuthUpdateLdapSimpleAuth,
microcmdAuthAddSMTP,
microcmdAuthUpdateSMTP,
Commands:[]*cli.Command{
microcmdAuthAddOauth(),
microcmdAuthUpdateOauth(),
microcmdAuthAddLdapBindDn(),
microcmdAuthUpdateLdapBindDn(),
microcmdAuthAddLdapSimpleAuth(),
microcmdAuthUpdateLdapSimpleAuth(),
microcmdAuthAddSMTP(),
microcmdAuthUpdateSMTP(),
microcmdAuthList,
microcmdAuthDelete,
},
}
microcmdAuthList=cli.Command{
Name:"list",
Usage:"List auth sources",
Action:runListAuth,
Flags:[]cli.Flag{
cli.IntFlag{
Name:"min-width",
Usage:"Minimal cell width including any padding for the formatted table",
Value:0,
},
cli.IntFlag{
Name:"tab-width",
Usage:"width of tab characters in formatted table (equivalent number of spaces)",
Value:8,
},
cli.IntFlag{
Name:"padding",
Usage:"padding added to a cell before computing its width",
Value:1,
},
cli.StringFlag{
Name:"pad-char",
Usage:`ASCII char used for padding if padchar == '\\t', the Writer will assume that the width of a '\\t' in the formatted output is tabwidth, and cells are left-aligned independent of align_left (for correct-looking results, tabwidth must correspond to the tab width in the viewer displaying the result)`,
Value:"\t",
},
cli.BoolFlag{
Name:"vertical-bars",
Usage:"Set to true to print vertical bars between columns",
},
},
}
idFlag=cli.Int64Flag{
Name:"id",
Usage:"ID of authentication source",
}
microcmdAuthDelete=cli.Command{
Name:"delete",
Usage:"Delete specific auth source",
Flags:[]cli.Flag{idFlag},
Action:runDeleteAuth,
}
oauthCLIFlags=[]cli.Flag{
cli.StringFlag{
Name:"name",
Value:"",
Usage:"Application Name",
},
cli.StringFlag{
Name:"provider",
Value:"",
Usage:"OAuth2 Provider",
},
cli.StringFlag{
Name:"key",
Value:"",
Usage:"Client ID (Key)",
},
cli.StringFlag{
Name:"secret",
Value:"",
Usage:"Client Secret",
},
cli.StringFlag{
Name:"auto-discover-url",
Value:"",
Usage:"OpenID Connect Auto Discovery URL (only required when using OpenID Connect as provider)",
},
cli.StringFlag{
Name:"use-custom-urls",
Value:"false",
Usage:"Use custom URLs for GitLab/GitHub OAuth endpoints",
},
cli.StringFlag{
Name:"custom-tenant-id",
Value:"",
Usage:"Use custom Tenant ID for OAuth endpoints",
},
cli.StringFlag{
Name:"custom-auth-url",
Value:"",
Usage:"Use a custom Authorization URL (option for GitLab/GitHub)",
},
cli.StringFlag{
Name:"custom-token-url",
Value:"",
Usage:"Use a custom Token URL (option for GitLab/GitHub)",
},
cli.StringFlag{
Name:"custom-profile-url",
Value:"",
Usage:"Use a custom Profile URL (option for GitLab/GitHub)",
},
cli.StringFlag{
Name:"custom-email-url",
Value:"",
Usage:"Use a custom Email URL (option for GitHub)",
},
cli.StringFlag{
Name:"icon-url",
Value:"",
Usage:"Custom icon URL for OAuth2 login source",
},
cli.BoolFlag{
Name:"skip-local-2fa",
Usage:"Set to true to skip local 2fa for users authenticated by this source",
},
cli.StringSliceFlag{
Name:"scopes",
Value:nil,
Usage:"Scopes to request when to authenticate against this OAuth2 source",
},
cli.StringFlag{
Name:"required-claim-name",
Value:"",
Usage:"Claim name that has to be set to allow users to login with this source",
},
cli.StringFlag{
Name:"required-claim-value",
Value:"",
Usage:"Claim value that has to be set to allow users to login with this source",
},
cli.StringFlag{
Name:"group-claim-name",
Value:"",
Usage:"Claim name providing group names for this source",
},
cli.StringFlag{
Name:"admin-group",
Value:"",
Usage:"Group Claim value for administrator users",
},
cli.StringFlag{
Name:"restricted-group",
Value:"",
Usage:"Group Claim value for restricted users",
},
cli.StringFlag{
Name:"group-team-map",
Value:"",
Usage:"JSON mapping between groups and org teams",
},
cli.BoolFlag{
Name:"group-team-map-removal",
Usage:"Activate automatic team membership removal depending on groups",
// Copyright 2023 The Gitea Authors. All rights reserved.
// SPDX-License-Identifier: MIT
packagecmd
import(
"context"
"errors"
"fmt"
"os"
"text/tabwriter"
auth_model"code.gitea.io/gitea/models/auth"
"code.gitea.io/gitea/models/db"
auth_service"code.gitea.io/gitea/services/auth"
"github.com/urfave/cli/v3"
)
var(
microcmdAuthDelete=&cli.Command{
Name:"delete",
Usage:"Delete specific auth source",
Flags:[]cli.Flag{idFlag()},
Action:runDeleteAuth,
}
microcmdAuthList=&cli.Command{
Name:"list",
Usage:"List auth sources",
Action:runListAuth,
Flags:[]cli.Flag{
&cli.IntFlag{
Name:"min-width",
Usage:"Minimal cell width including any padding for the formatted table",
Value:0,
},
&cli.IntFlag{
Name:"tab-width",
Usage:"width of tab characters in formatted table (equivalent number of spaces)",
Value:8,
},
&cli.IntFlag{
Name:"padding",
Usage:"padding added to a cell before computing its width",
Value:1,
},
&cli.StringFlag{
Name:"pad-char",
Usage:`ASCII char used for padding if padchar == '\\t', the Writer will assume that the width of a '\\t' in the formatted output is tabwidth, and cells are left-aligned independent of align_left (for correct-looking results, tabwidth must correspond to the tab width in the viewer displaying the result)`,
Value:"\t",
},
&cli.BoolFlag{
Name:"vertical-bars",
Usage:"Set to true to print vertical bars between columns",
returnerrors.New("The password you chose is on a list of stolen passwords previously exposed in public data breaches. Please try again with a different password.\nFor more details, see https://haveibeenpwned.com/Passwords")
returnfmt.Errorf("password is not long enough, needs to be at least %d characters",setting.MinPasswordLength)
caseerrors.Is(err,password.ErrComplexity):
returnerrors.New("password does not meet complexity requirements")
caseerrors.Is(err,password.ErrIsPwned):
returnerrors.New("the password is in a list of stolen passwords previously exposed in public data breaches, please try again with a different password, to see more details: https://haveibeenpwned.com/Passwords")
default:
returnerr
}
}
fmt.Printf("%s's password has been successfully updated!\n",user.Name)
Usage:"Username. DEPRECATED: use username instead",
},
&cli.StringFlag{
Name:"username",
Usage:"Username",
},
},
},
Required:true,
},
},
cli.StringFlag{
Name:"username",
Usage:"Username",
Flags:[]cli.Flag{
&cli.StringFlag{
Name:"user-type",
Usage:"Set user's type: individual or bot",
Value:"individual",
},
&cli.StringFlag{
Name:"password",
Usage:"User password",
},
&cli.StringFlag{
Name:"email",
Usage:"User email address",
Required:true,
},
&cli.BoolFlag{
Name:"admin",
Usage:"User is an admin",
},
&cli.BoolFlag{
Name:"random-password",
Usage:"Generate a random password for the user",
},
&cli.BoolFlag{
Name:"must-change-password",
Usage:"User must change password after initial login, defaults to true for all users except the first one (can be disabled by --must-change-password=false)",
HideDefault:true,
},
&cli.IntFlag{
Name:"random-password-length",
Usage:"Length of the random password to be generated",
Value:12,
},
&cli.BoolFlag{
Name:"access-token",
Usage:"Generate access token for the user",
},
&cli.StringFlag{
Name:"access-token-name",
Usage:`Name of the generated access token`,
Value:"gitea-admin",
},
&cli.StringFlag{
Name:"access-token-scopes",
Usage:`Scopes of the generated access token, comma separated. Examples: "all", "public-only,read:issue", "write:repository,write:user"`,
Value:"all",
},
&cli.BoolFlag{
Name:"restricted",
Usage:"Make a restricted user account",
},
&cli.StringFlag{
Name:"fullname",
Usage:`The full, human-readable name of the user`,
},
},
cli.StringFlag{
Name:"password",
Usage:"User password",
},
cli.StringFlag{
Name:"email",
Usage:"User email address",
},
cli.BoolFlag{
Name:"admin",
Usage:"User is an admin",
},
cli.BoolFlag{
Name:"random-password",
Usage:"Generate a random password for the user",
},
cli.BoolFlag{
Name:"must-change-password",
Usage:"Set this option to false to prevent forcing the user to change their password after initial login, (Default: true)",
},
cli.IntFlag{
Name:"random-password-length",
Usage:"Length of the random password to be generated",
// PrepareConsoleLoggerLevel by default, use INFO level for console logger, but some sub-commands (for git/ssh protocol) shouldn't output any log to stdout.
// Any log appears in git stdout pipe will break the git protocol, eg: client can't push and hangs forever.
// CmdDoctor represents the available doctor sub-command.
varCmdDoctor=cli.Command{
varCmdDoctor=&cli.Command{
Name:"doctor",
Usage:"Diagnose and optionally fix problems",
Usage:"Diagnose and optionally fix problems, convert or re-create database tables",
Description:"A command to diagnose problems with the current Gitea instance according to the given configuration. Some problems can optionally be fixed by modifying the database or data storage.",
Action:runDoctor,
Flags:[]cli.Flag{
cli.BoolFlag{
Name:"list",
Usage:"List the available checks",
},
cli.BoolFlag{
Name:"default",
Usage:"Run the default checks (if neither --run or --all is set, this is the default behaviour)",
},
cli.StringSliceFlag{
Name:"run",
Usage:"Run the provided checks - (if --default is set, the default checks will also run)",
},
cli.BoolFlag{
Name:"all",
Usage:"Run all the available checks",
},
cli.BoolFlag{
Name:"fix",
Usage:"Automatically fix what we can",
},
cli.StringFlag{
Name:"log-file",
Usage:`Name of the log file (default: "doctor.log"). Set to "-" to output to stdout, set to "" to disable`,
},
cli.BoolFlag{
Name:"color, H",
Usage:"Use color for outputted information",
},
},
Subcommands:[]cli.Command{
Commands:[]*cli.Command{
cmdDoctorCheck,
cmdRecreateTable,
cmdDoctorConvert,
},
}
varcmdRecreateTable=cli.Command{
varcmdDoctorCheck=&cli.Command{
Name:"check",
Usage:"Diagnose and optionally fix problems",
Description:"A command to diagnose problems with the current Gitea instance according to the given configuration. Some problems can optionally be fixed by modifying the database or data storage.",
Action:runDoctorCheck,
Flags:[]cli.Flag{
&cli.BoolFlag{
Name:"list",
Usage:"List the available checks",
},
&cli.BoolFlag{
Name:"default",
Usage:"Run the default checks (if neither --run or --all is set, this is the default behaviour)",
},
&cli.StringSliceFlag{
Name:"run",
Usage:"Run the provided checks - (if --default is set, the default checks will also run)",
},
&cli.BoolFlag{
Name:"all",
Usage:"Run all the available checks",
},
&cli.BoolFlag{
Name:"fix",
Usage:"Automatically fix what we can",
},
&cli.StringFlag{
Name:"log-file",
Usage:`Name of the log file (no verbose log output by default). Set to "-" to output to stdout`,
},
&cli.BoolFlag{
Name:"color",
Aliases:[]string{"H"},
Usage:"Use color for outputted information",
},
},
}
varcmdRecreateTable=&cli.Command{
Name:"recreate-table",
Usage:"Recreate tables from XORM definitions and copy the data.",
ArgsUsage:"[TABLE]... : (TABLEs to recreate - leave blank for all)",
Flags:[]cli.Flag{
cli.BoolFlag{
&cli.BoolFlag{
Name:"debug",
Usage:"Print SQL commands sent",
},
@ -81,17 +93,14 @@ You should back-up your database before doing this and ensure that your database
Description:`Dump compresses all related files and database into zip file. It can be used for backup and capture Gitea server image to send to maintainer`,
